Beginning of week... Well, I had to work late last night.. So, she wasn't watered for 24 hours.. I have been having to water/feed 2 to 3 times a day due to the media drying out.. The roots are insane in the cup.. Alot aLoT ALOT of fuckin roots.. This is my first cup grow that had this much roots.. So yeah, I could see her drinking like a mf.. Which she does.. She is happy and healthy... Besides the underwatering today.. I couldn't be more happy with the way this girl is growing. After 7 days of 12/12 and the tops are starting to form pistils.. Next week should be epic pistil growth by the way she's been growing so far.. Will update when she perks up from the underwatering.. Later that day.. Shit.. She perked up.. But not enough to show a full recovery pic.. I watered when I took the underwatered pic and before lights went out.. That was only about... 4 hours.. Usually the girlies perk up after about an hour or maybe 2.. I'm sure she will be fine in the AM.. Oh yeah I forgot to add in the veg cycle I was adding 1mL per L of water of Silica.. So that should have helped her build up a good immunity to my abuse.. This is the only hiccup so far in the grow.. No more stress! Will update on the issue in the AM with pics whether she fully recovered or not 24 hours after decovering she was underwatered... She perked back up.. I forgot to mention that I have been bending the tops to help the lower branches stretch up some.. I remember reading somewhere that is another form of LST, I believe. I'm pretty much just bending the top 2 - 3 nodes to point straight down.. Which is just enough to not snap the top completely off.. When I release the top she stays pointed pretty much at 90° away from the center of the plant.. A few more side branches have almost caught up to their main tops. I read that it kinda like tricks the plant into thinking she's topped 'in a way'.. I feel like it just stresses the branch upward from where the most bending is at.. And the side branches are not being stressed at all so they keep growing/stretching at normal speed, if not a little faster, while the top above the bend has been stressed and slows down, if not stops completely. Just my 2 cents on the dealio.. Just bend the main tops downward 180° from the center of the plant, so that when you release the tops, they stay bent over at 90° (or tied like LST) and let the bottom branches get all the light.. After a couple hours, the tops will have probably already pointed back upward..😁 The capacitor on my home AC went out.. Temps in the tent got up to 90° F.. Leaves were pointing upward.. Praying.. But also canoeing.. Luckily I checked google and youtube on how to fix it.. I fixed it in under 15 mins.. Got the temps back down to normal and just made sure I kept her good and watered thru the heat stress. She is good now tho. The pics for today were 6 hours after seeing the heat stress. When I say LST this week.. Its just bending the tops down as I stated earlier in the grow.. I even removed the ties that I did have.. I shouldn't have done that because the tops kinda bunched together.. Oh well.. Live and learn.. Shouldn't create any issues.. Its easier to water now.. i was using a 1 fl oz turkey baster that worked very well.. But also time consuming.. Now I can just pour straight out of the powerade bottle I use to mix and store nutes and water.. I never keep anything mixed for more than 2 or 3 days at the most.. I have just ordered a bunch of hydroponic stuff.. And organic stuff... I can't run both at the same time.. I don't know which to try first.. Im thinking try hydro first.. Then organics because I think organics MAY be where I end up but still wanna try hydro to see how it ends up.. Hmmm... Went ahead and lollipopped her and bent the main tops down.. One branch kinda snapped so I think it was pretty much supercropped lol whoops.. Didnt break the skin tho.. I dont really care for defoliating alot.. But I always end up doing it anyway.. I need to stop lol

After tap root popped. Put directly into soil/seed tray, covered with humidity dome and put on heat mat set at 78. Once I saw roots I transferred them to final 5g fabric pot

Day 36 and all is well both spliff strawberry made it through the high humidity and are still growing strong

Fed Flower Girl Tea this past week 1x. One plant has reached 28in and there are plenty of bud sitings all around. Defoliated a lot (did my version of lollipopping), I wanted to isolate the bud spots for maximum light. Watering every 2 days, plants are drinking up real quick!

Just got back from vacation with lots of worries for the girl but she did fine , 6 days without watering :0

They looking good, but temp is a little too high. It is what it is One of the plants (In front to the left) is more frosty, with less amber pistils. But overall the trichomes are starting to go from crystal to cloudy. Which is my timing for start flush. 24/7 -Temp 23-26day/21-24night -47%RH (2+-) 25/7 Water day* start of flush Gave them till run through with plain ph balanced water, and topped it off with some light nutrients-mixed water. -Temp 23-26day/21-24night -49%RH (2+-) 26/7 -Temp 23-27day/21-24night -47%RH (2+-) 27/7 -Temp 23-26day/21-24night -47%RH (2+-) 28/7* Water day / flush -Temp 23-27day/22-24night -47%RH (2+-) 29/7 -Temp 24-27day/22-24night -47%RH (2+-)

Week 5 Veg Report: SCROG Netting, Massive Leafs & Precise Data Mastery! 🌱 Girls Growing Stronger Than Ever! 🌱 This week has been truly epic in the grow room—so much so that it’s time to bring in the SCROG net! With the canopy expanding and the younger ones still working to catch up, the SCROG net will help me achieve that perfect, even canopy. A well-placed SCROG not only ensures better light penetration but also gives the smaller plants a chance to spread out and thrive alongside their bigger sisters. Now, let’s dive deep into the SCROG method. The Screen of Green (SCROG) technique is a grower’s secret weapon for maximizing space, light efficiency, and yields. The concept is simple but powerful—train the plants to grow horizontally along the net, forcing them to expose multiple budding sites instead of just a single cola. This way, the canopy spreads evenly, improving light distribution and air circulation throughout the tent. As the plants grow, I’ll gently weave their branches through the screen, ensuring they fill every square inch of space. The end goal? A sea of buds all basking in equal light! 💪 Huge Leafs Everywhere! 🌿 One thing that’s really catching my eye this week is the size of the leaves—they’re HUGE! Honestly, they’re so big I couldn’t resist a little fun, so I made myself some fashion accessories: leaf earrings and a cap from the Super Sativa Seed Club Green Papaya! 😂 And, of course, I captured the moment. But seriously, large leaves at this stage are a great sign of healthy, robust plants. These “solar panels” are hard at work soaking up all the light, driving photosynthesis, and fueling growth. So, what does it mean when your plants are showing off big, luscious leaves? It’s a clear indication that they’re happy, healthy, and thriving in their environment—big leaves mean lots of energy being produced and stored for future bud growth. Exactly what we want! 💧 Precision Feeding with Aptus Nutrients 💧 This week, I took a deep dive into my Aptus nutrient lineup and shared a video explaining how each product affects the water’s pH and TDS. Using the AMP-3 Precision Meter, I’m getting real-time water readings and keeping everything dialed in perfectly. Let’s break it down: • pH: 5.83 • TDS in solution: 445 ppm • Water temperature: 25.2°C The Aptus products are incredible for balancing nutrients without throwing off the pH or TDS too much. I’m fine-tuning my feedings based on these readings to make sure the girls are getting exactly what they need. The precision I’m able to achieve with the AMP-3 is mind-blowing—I get immediate feedback on pH, temperature, and EC, allowing me to make real-time adjustments and ensure the perfect environment for nutrient uptake. 📊 Environmental Mastery Thanks to TrolMaster 📊 Speaking of control—let’s talk about the TrolMaster system! Between the DSH-2U Humidity Station and all the other sensors, I’ve created the perfect environment for my plants. Here’s where we’re at this week: • Temperature: 26.2°C • RH: 70.6% • CO2 levels: 775 ppm • VPD: 1.0 kPa • PPFD: 423 Thanks to TrolMaster, I can monitor and adjust these metrics in real time, and the best part? I can do it all through the TM+ Pro app, even while I’m lounging in my green papaya leaf hat! 😆 Whether I’m checking the CO2 levels, adjusting the lights, or fine-tuning the humidity, it’s all in my hands with just a tap of my phone. Talk about convenience! 🌱 P.S. – Inline Sensors: Heavy-Duty Precision 🌱 Now, let’s talk about the heavy-duty players in this game—the (PCT-2) Heavy Duty Inline EC/Temp Sensor and the (PPH-2) Heavy Duty Inline pH Sensor. These bad boys are connected directly to the AMP-3 Precision Meter, and they’ve been absolutely crucial in giving me the most accurate readings on my water and nutrient solution. The PCT-2 keeps me informed about the electrical conductivity and temperature of my solution, which is key for monitoring how well my plants are absorbing nutrients. Too high or too low, and we’re asking for trouble, but this sensor ensures I’m always in that perfect range. The PPH-2, on the other hand, is all about maintaining the perfect pH balance. A fluctuating pH can mean nutrient lockout or deficiencies, but thanks to this sensor, I get a constant read on my pH levels, so the plants are always in their sweet spot for optimal nutrient absorption. Together, these inline sensors allow me to run a super-tight ship—every drop of water and nutrient is dialed in to perfection, keeping the plants happy and healthy! Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Growers Love to you all 💚💚💚

What a beast! The main bud has really plumped up and looks absolutely gorgeous. I’ve trimmed off a few of the larger leaves. It smells delicious and looks very healthy.

Total tent entry time this entire week was 15 minutes. Today was focused on recording data mainly. I'm giving them a weekend off before full schwazze, top dress, & flip next week. Tucked any fan leaves blocking growth sites. Worked 1/4 cup Kiss My Frass, mealworm derived insect Frass, into straw mulch top layer of each container. Hand watered each plant with 1/2 gallon 6.5 ph 13 ppm reservoir water mixed with 1/2 tsp each of coconut water powder, Azos, & quillaja powder. Raised DLI to 35. I fully expect it to naturally raise to 40 as the plants expand vertically. Raised average VPD to 1.0 -Expression #1- Previous Week Height-5" Width-6"x9" Current Week Height-10" Width-18"x20" -Expression #2- Previous Week Height-4.5" Width-8"x7" Current Week Height-8.5" Width-15"x14"

Week 1! Super excited to try NO in dwc.

IRIE Genetics 4 Grow IR1Q Veg Week 4 Cultivars Purple Heart [5] (Cherry Jelly CBD X Afterglow) [Fem/Seeds]: PH1Q24, 65 Days Scarlet Begonias [1] (Haze X William’s Wonder) X Arise)
 [Reg/Seeds]: SB1Q24, 70 Days Lemon Jeffery [2] (Lemon Skunk X Golden Goat) [Fem/Cut]: LJ124, 70 Days Environment Plan Vegetation - Temp: [ 82,°F] - RH: [ 72, %] - VPD: [ 0.85, kPa] Fertigation Plan - Seedlings - RLA Light Week 4: EC: [ 1.5 mS] (0.8 Nutrients + 0.3 Filtered Tap Water) Biology: # (One of…) - Photosynthesis Plus: [ 6, ml, gal] - King Crab: [ 0.5, ml, gal] - Mammoth-P: [ 0.6, ml, gal] Line & Res Maintenance: - SLF-100 Enzymatic Cleaner: [ 5, ml, gal] Foliar Feeds - RLA Foliar Schedule Start of Week: [ Wed 28 Feb, 2024, IRIE1Q24 29:V:4:1] End of Week: [ Tue 05 Mar, 2024, IRIE1Q24 35:V:4:7] __ Wed Mar 6, 2024 IRIE1Q24 29:V:4:1 Planning on flip today - we still need to deal with Topping and sufficient start height. - [ ] REDO Diary Index once Flip DETERMINED - [x] Rooted Leaf Foliar: CalMag Fuel: [ 20, ml, gal], Lush Green: [ 5, ml, gal]  - [x] Post Grow Diary Fertigation 330 ml/plant 1845: 120 * 8 (960 ml) - Fertigate 120 ml/plant 2200: 210 * 8 (1680 ml) - Fertigate 210 ml/plant 2640 / day 330 / plant Irrigation Calibration Line 0: 100 ml, 12 second lime fill +120 sec, 775 ml 7 lines Line 1: 100 ml, 225 sec, 650 ml 7 Line 3: 100 ml, 208 sec, 750 ml lime 4: 100ml, 215 sec, 725 __________________________ Target 440 ml/ Day 4 Fertigations/Day 11 Hour Duration 2h 45m Frequency, Lights On 2.16 sec/ml/plant feed rate Fertigation Duration: 235 seconds Once Running - We need to calibrate on RUNOFF. DURATION PER EVENT 200s (3 min, 20 sec) ( 92 ml/fertigation/plant) Event 0 3/6/24 19:00 Event 1 3/6/24 21:45 Event 2 3/7/24 00:30 Event 3 3/7/24 03:15 RLA HYDRO: EC 1.8, 2 Gallons to Res Primer A & B: [ 16, ml] Silica Skin: [ 8, ml] __ Thu Mar 7, 2024 IRIE1Q24 30:V:4:2 Prep Reservoir: # 2 Gal, EC: 1.5 - [x] Primer A: [ 8, ml, gal], [ 16, ml]l - [x] Primer B: [ 8, ml, gal], [ 16, ml] - [x] Silica Skin: [ 4, ml, gal], 8, ml] - [x] King Crab: [ 1.0, ml] - [x] Dr. Bronners Soap: [ 10, drops] - [x] SLF-100: [ 5, ml, gal], [10, ml] - We’re attempting to assure we ONLY use low sediment inputs (clean lines). ONLY Low/Non-Precipitating inputs . . . Messed up initial mix, Only achieving EC 1.5/No Change … ok for a day or two . . . 1100 - Ran total of 320 sec. 320/2.16: ~ 148 ml @220 sec per fertigation, we should be delivering ~92 ml/event Or 368/plant/day. This implies - Deliverered to Tent: 2944/day - 10% Runoff: 294/day We’ll be looking for ~300 ml runoff @ Lights on @ 1900 - [ ] ADJUST Fertigation Duration to achieve 294 ml/day __ Fri Mar 8, 2024 IRIE1Q24 31:V:4:3 I’m pretty much sure we’re delivering significantly less Fertigation than we think. Ran pump for a FULL 9 Minutes at noon. There has been no runoff, and plants are not terribly happy. I think we’re severely under watering. Solution - Buy pump with advertised 6’ HEAD,, 35 Watt SICCE Syncra 2.0. - [x] Order SICCE Syncra 2.0 from Amazon - [x] Order 3/4” NPT Male to 3/8” Barb Fertigation Observations We need to be able to irrigate in minutes per event, NOT 10’s of minutes. The Little GIANT transfer pump LACKS sufficient HEAD to consistently deliver across the irrigation rings. The new pump should be able to provide sufficient pressure to do . . . Pressure (psi) = .433 * Height (ft) Alternatively 2.31 ft/psi The Syncra 2.0 has a 6.5’ Head, delivering ~ 2.8 psi, 10% of the max flow at the manifold, meaning the pressure restrictor, won’t. Ex. - If we Deliver @4ft, we have (2.8 - 4(.4333)) or 2.8 - 1.7 or 1.1psi IFF We’re not getting decent flow, will have to RAISE TANK 2.3 Ft to achieve 2.0 psi or more … - [ ] Rooted Leaf Foliar: Solar Rain: [ 20, ml, gal], Peak Bloom: [ 5, ml, gal]  ONCE WATERING IS RESOLVED and we have obvious Vegetative growth . . . - [ ] Top to Node 4 - [ ] Clone Tops - [ ] CLIP Growth Tips Nodes 1 & 2 (Leave node 3 tips for clones in 2 weeks) - [ ] FLIP TO FLOWER: Drop Intervening Dark Hour (Tent Light Controller) - [ ] RE-Index Grow Log to Flip ‘This’ date . . . __ Sat Mar 9, 2024 IRIE1Q24 32:V:4:4 Removed Pressure Restrictor from XeriBird8 Manifold and cleaned well. Replaced Little Giant pump with SICCE Syncra 2.0 (6.5’ head). The little giant was probably fine . . . __ Sun Mar 10, 2024 IRIE1Q24 33:V:4:5  KEY Problems were the back flow protector on the Little Giant that reduced flow 1PSI, and flow restrictor on Xeribird8 for 10x the pressure of our little system. We’re lucky to have a couple of PSI at the emitters. That said - we produced ~1.5 gallons of runoff yesterday. To maintain runoff (but less than 1 GAL!), I’ve HALVED delivery times. Goal is to reduce runoff to ~10% of estimated delivery … Current Fertigation Run: 5 min Duration, 4 times in 11 hours.   We’ll FLIP on Week Change - give a couple of days for root development, some more height. We need to - [ ] Would like to grow to middle bar of tent BEFORE topping. - [ ] VERIFY ROOT POPULATION AT BOTTOM OF CONTAINERS BEFORE FLIP. (If we’re well populated, we’ll rock - delay FLIP UNTIL All containers need to demonstrate significant root development around periphery of the bottom of each airpot. __ Mon Mar 11, 2024 IRIE1Q24 34:V:4:6 - [ ] Rooted Leaf Foliar: Solar Rain: [ 20, ml, gal], Silica Skin: [ 20, ml, gal]  __ Tue Mar 12, 2024 IRIE1Q24 35:V:4:7 Runoff: [ 700, ml], [ 1.0, mS] During Dark - Flushed RLA CalMag Fuel, ~ 450 ml/plant @ EC: 1.8 mS - I’m not convinced I properly buffered the coco. Will do this weekly if Coco induced Calcium deficiency observed.

These are clones that I managed to take from my summer garden that became a disaster due to a heat wave that we had breaking 100 year records. I expect everything to be 48” in height at maturity.

Flushing looking a lot better than I thought

Hi everyone, farmers friends! We have come to the end of another arduous company ERI of all this fantastic plant

The plant keeps stacking buds nicely and the flowers are visibly thickening every day. Resin production is still increasing and the trichomes are fully milky, showing clear signs of late flower. A light fruity aroma is slowly coming through, getting more noticeable now. Overdrive has been introduced and harvest is expected in around 10–12 days.

Huge thing 26/01/2025 - defol 27/01/2025 - flushed Coco to lower the strength feed from 1.3 to 0.9 EC

Had to cut down has polenated

Also bisher finde ich sie sehr klein, Aber denke die stecht sich vielleicht noch machen ja Autos im Regelfall dennoch bisher bin ich sehr zufrieden. Die Blütenstempel sind gut am Wachsen. Jetzt mal schon ob sie demnächst die Farbe ändert. 💜