WEEK 6 This week went pretty well. The plant has put on a good amount of height and focused its energy on five main shoots. I removed a few shoots and leaves at the bottom, but otherwise it’s growing quite nicely. Starting the nutrients early doesn’t seem to have been a good idea this time — the fertilizer läßt week was still a bit too strong for this stage. But I managed to get things under control quickly with plenty of water. The stem looks solid, and overall there’s nothing to complain about so far. I was hoping for more large shoots, but I think this setup could still turn out really well. It remains exciting 🙂 PPFD: 750µmol/m²/s Water: 2x water 1x nutrient solution Vpd: 1,4Kpa

Growing: 5 weeks Flowering: 9 weeks This was my first grow indoor from some time ago. First time using the Mars Hydro SP250. Was amazed at the result, did not expect it. Encountered a few problems, including Calmag deficiency and some bugs. Did not gave them water for 30 days after plantation to the big bags of 25L. Harvested all plants at the same time, which might have been too early for a few ladies. Nevertheless I enjoyed getting to know the lamp and hoping I will do better next round. The lamp was in this round not at max capacity but at 226w, it came like that out of the box and I did not adjust it. Also did zero defoliation which resulted in a lot of "Albino Tops" under the net, which I recovered to make butter and bubble hash from. Most of the buds above the net where really dense and not fluffy at all. End result: 320gr total, around 4x 70gr average from the 2x BB OG, 1x A.M.S. and 1x Jack, the Purple Bud gave around 40grams. Thanks for checking out my grow! Good luck growing!

Hi everyone, I transplanted the lady into a bigger pot before her last transplant for early August. I added mycorrhizae and I pinched the stems to control the height. She looks very happy .it resists very well to very high temperatures. 38 degrees in the shade in the middle of the afternoon.

Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34

The girls are loving life it seems, topping was successful and life is good in the room. In a couple of days I'm going to do some lst and get them flipped.

The buds are like little meteorites ☄️☄️☄️ outstanding quality!

7/28 some light lead pulling removing bottom area and sites that I fill be waste of time taking energy from the tops still RO water and tea every other week

Still going strong. Staying healthy and attracting ladybugs. Feeding her molasses. No other change in feeding amount except that

Ottimo raccolto, bei fiori sani buoni e sopratutto forti. Sono contento di avere da parte 2 semi nuovi da coltivare!! La pianta da subito è cresciuta in altezza mantenendo lo spirito sativo

Lets gooooo looking bea

Everything went according to plan. From germination the plant displayed a very good development. With no training I believe she gave a very good yield. She always looked very strong with no signs of any risk.

Max 3 Pflanzen

This was a good week to learn a few things about what I want to do for the next grow. This grow, I let the ladies grow to 5 nodes before topping to the third - next grow, I would top to the third when the 4th is clearly visible. I am about 1 week behind schedule, waiting for the nodes on the mainline to grow so they can be topped again. Going to top them into 8 main cola’s. Reduced water in the buckets to 7l so that the roots have to work a little harder because Cheech was showing signs of being over-watered. Lights remained at 60cm about the plants, 1ml of all nutrients per litre of water.

🍀25/04 - Empieza su primer semana en etapa de crecimiento. 🍀Por el momento viene de manera correcta sin ningún inconveniente. 🍀El Ph ya se lo estoy empezando a modificar en 6.3. 🍀Lo que pude notar es que de un día para el otro la plantula creció bastante, se encuentra tupida y bastante grande para los 20 días que tiene de vida. 🍀Los tres fertilizantes que utilice se los agregue directamente en el agua (1L) y la regué. 🍀Tengo pensado dejarla cinco semanas en total en esta etapa, así puede desarrollarse de manera correcta. 🍀En estos dias subiré más imágenes! Podes seguirme en Insta gram como @bruweed_arg !😶‍🌫️☘️

Veg14, transplante y riego.

Medusa 2/5 is starting to get fatter. I decided to Lollipop and remove the lower growth. Im curious to compare the colas and see if lollipopping really increases bud size. This plant really grows beautifully, two main colas in top from the topping, and all the other colas around the two main colas. I started giving green sensation PK booster this week I reckon another 4 weeks before harvest.

Last week of nutrients. I will flush them next week with advanced nutrients flawless finish. There are some big differences in finish time between the plants ,but we will see . Unfortunately i don't have the luxery of having a separate drying tent. So i have to find the sweet spot between the plants.

Vamos familia, actualizamos la cuarta semana de vida de estas Runtz Punch de Herbies. Tuve problemas con la temperatura que estuvo alta 28/26 grados y humedad dentro de los rangos correctos, la única queja es la temperatura, 16 horas luz, 8 oscuridad, estiraron un poco, pero van lentas por el momento, que cojan fuerza. El trasplante a sido realizado a la maceta definitiva, 7L con sustrato Top crop. Hasta aquí todo, Buenos humos 💨💨💨

Week 10: Mold Warfare & Rainy Woes Update: 28.07.2025 | Day 79 Tough news first: Constant rain, humidity never drops below 60% - full-blown mold weather. Yesterday spotted first mold outbreaks. Cut immediately: 1 budsite on Forbidden Runtz, 2 on Green Crack. Damage contained for now thanks to eagle-eyed inspection. Daily mold patrols intensified. Strain Status in the Rain: Forbidden Runtz - Foxtailing worsens (humidity culprit?) - Trichomes mostly cloudy - 1 week to harvest target - Considering partial harvest: Biggest buds first, smaller ones risk mold - Beautiful purple hues emerging (ironically makes mold spotting harder) - Smell remains fantastic Green Crack - Fully sugarcoated but mold hit her hardest - Yield estimate: ~50g if no more mold - Trichomes: Cloudy but zero amber - needs 7+ days - Critical need: Airflow around thickest buds Bruce Banner - No mold yet (thank you sativa genes!) - Buds still swelling daily - stay vigilant - Resin production finally ramping up - Pistils showing vibrant colors - Mild aroma developing - Timeline: Minimum 2 more weeks Survival Protocol: - Daily inspections: Flashlight checks inside every bud - Immediate surgery: Sterilized scissors ready 24/7 - Yellow leaf purge: Remove wilted leaves instantly (mold incubators) Hoping your skies are sunnier than ours, Catch y'all next week. Smoking_Joe_Frazier