Likes
Comments
Share
@WetWillie
Follow
Maintaining 1.2 VPD, last week of 18/6, flipping to 12/12 next week.
Likes
3
Share
I love sativa. This is a great freaking plant. Long skinny buds (a little squeezed by me :) and the smell is incredible (strong put in jar open 5 min later my house smells strong) its sweet from the haze but it's got that gassy fuel smell to it also with a tiny bit of earthy after aroma. It's wonderful smokes great gets me higher than any weed at the stores and I never have coughed from it I don't think it's so smooth. Organically grown buds are fckin smooooothh man I never would have understood until I grew organic! This bud is the tits I'm stoned off a mix of blueberry amnesia haze northern ligbt joint as I write this lmao good harvest
Likes
13
Share
These plants are starting to come back nicely . Unfortunately due to me being extraordinary lazy this grow, not maintaining them properly & not on time & the watering issue they suffered they didn't meet their potential! Because of this they didn't go through much of a flowering stretch! Growers if you use the promo code GROWEED, you will receive a 15% discount on any Fast Buds purchase!
Likes
6
Share
@IamCy
Follow
Here we are, the start of flower! From here I'll be uploading videos daily.
Likes
30
Share
Hallo zusammen 🤙. So das war es für sie. Wir sehen uns in 3 Wochen mit dem Erntebericht wieder. Bis dann Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
36
Share
Last 10 days for the banana before harvest. Have been flushing for around 5 days now. The Sour D will get its last feeding in a few days before going into flush. Been checking the trichomes rapidly on the Fat banana and they are crystal clear with some of them being milky. I will give it 4 days more before putting it under total darkness for 48 hours.
Likes
18
Share
Day 8 of Flowering, this babies are stretching hard and starting to show white pistils and i couldn't be happier! Even if the soil is pre fertilized i just added 0,5ml of Biomagno FiorituraOM to help the plants start flowering, as @Mangodudu said EC was only 1,2 it shouldn't get them overfert. The structure il very nice and the plants are vigorous and always with praying leaves, i defoliated pretty hard and fixed every branch to a bamboo stick, so they don't have to carry the weight of the buds in the next weeks and focus all the energies in the bulking up the buds. I also just lowered the lights to get some light stress and help the plants stretch harder, and the response was amazing they just doubled the size in this first week of flower, I'm also very happy with this canna plus pro soil, it takes the water and drys very fast it think it's thanks to all the cocco in it.
Likes
27
Share
3/25/2023 Week 6- Day 1 of Veg (Day 52 overall) Added my first between changes SILICA Top offs. Was worried that when you add it to pre mixed Nutes that it can make the whole thing turn into a gummy looking substance. I was ready to drain the system and start it over for the week if needed, but no issues adding it to the tank. the Silica going into the Res didn't gummy the system up, it did drop my PH by quit a bit causing me to have to bring it back in balance. 36 Gallons in the Tank Silica Add .5mil/Gal = 18Mil I topped some that needed to be topped, I defoliated some that needs to be defoliated. Since I have moved into Week 6 I have increased the light intensity up to just over 500 maxing it out for Veg Cycle. Next increase will be Week 1 of Flower. 3/26/2023 Week 6- Day 2 of Veg (Day 53 overall) All conditions looked great. Other than me not putting one of the humidifiers back right which means it didn't work last night so Humidity was lower than I like. But got the Humidifier back on it's stand correctly and it is now pumping away. With that I decided to give the plants a day off from any stresses, no topping, no FIMing, no Defoliation for today. Just some good old soaking up the light rays and the ability to get all the Nutes they would like.. 3/27/2023 Week 6- Day 3 of Veg (Day 54 overall) Looking kind of Bushy today, so I defoliated some, and topped some. 3/28/2023 Week 6- Day 4 of Veg (Day 55 overall) PH was a little lower than I like 5.74 so I added a few Mil of PH UP and brought it back up to 5.94. Not much else at this stage, just I topped a little and I defoliated a little. 3/29/2023 Week 6- Day 5 of Veg (Day 56 overall) Topped a little, Defoliated a little Watched them grow!! 3/30/2023 Week 6- Day 6 of Veg (Day 57 Overall) Main action today was breaking down my old tent and setting up a new tent and getting my second RDWC system setup and ready for clones. I Topped a little, I Defoliated some and started taking a good look at what I would like to take for clones in the coming days. I have a few bottom branches that look every promising for my clone material on each. 3/31/2023 Week 6- Day 7 of Veg (Day 58 overall) #3 is at 16" Tall #2 is at 13" Tall
Likes
47
Share
@GrowGuy97
Follow
Day 81 - Rock machine & Doctors Choice #1 getting cut down today! I am so glad I decided to let them go another 2 weeks because buds on both plants got much thicker the last 2 weeks. DC#1 has a strong fruity smell & has purple hues all over the bud & the Rock machine is caked in crystals and has more of a gassy smell! Can’t wait to see how they smoke, stay tuned for the harvest update & make sure to go check out Doctors Choice for some 🔥 genetics! Thanks for following & happy growing friends!🙏🏼✌️🏼🌱
Likes
18
Share
@rockbo47
Follow
SUMMARY: Still continuing with early bloom nutes this week. I ran out of rainwater this week for a few days and had to make a batch with tap water. Had some issues with humidity and temps now that the RH has naturally increased due to the size and bushiness of the plants and so I have had to turn the dehumdifier on however this raises the temps and so its about finding a good balance. I did a heavy defoliation on day 44 stripping almost all fan leaves and any lower small shoots which wont ever get enough light. I also raised the light again so that it is 16" above the canopy of my tallest plant which is a few inches taller than the NL. To mitigate this I raised the NL up by a couple inches or so. DAY 44 -------- Sunday 14th February 11:45 I made 10L of early bloom nutes with dechlorinated tap water (no rain water left), 5L at a pH of 5.7 and 5L at a pH of 5.6. Sunday 14th February 18:00 I did a heavy defoliation on the NL stripping almost all fan leaves and any lower small shoots which wont ever get enough light. I also raised the light again so that it is 16" above the canopy of my tallest plant which is a few inches taller than the NL. To mitigate this I raised the NL up by a couple inches or so. I fed the NL 2L of early bloom nutes which produced 550ml runoff (28%). [24°C/46%] DAY 45 -------- Monday 15th February 18:30 I fed the NL 2L of early bloom nutes which produced roughly 800ml runoff (40%) I THINK, as I spilt a bit in the tent. DAY 46 -------- Tuesday 16th February 11:30 I made 10L of early bloom nutes with rainwater, 5L at a pH of 5.8 and 5L at a pH of 5.9. I forgot to turn the heat down over night and the humidity is at 56% currently. [22°C/56%] Tuesday 16th February 18:30 I fed the NL 2L of early bloom nutes which produced roughly 1L runoff (50%). Shes still not back to her normal intake before the defoliation which was only 2 days ago. I turned the dehumidifier on and set it to 45% as the RH had climbed to 62%. [22°C/62%] DAY 47 -------- Wednesday 17th February 12:00 I made 10L of early bloom nutes with dechlorinated tap water, 5L at a pH of 5.7 and 5L at a pH of 5.6. Wednesday 17th February 18:30 I fed the NL 1.7L of early bloom nutes which produced roughly 820ml runoff (48%). DAY 48 -------- Thursday 18th February 18:30 I fed the NL 1.2L of early bloom nutes which produced roughly 670ml runoff (56%). Shes still hardly drinking much so I will dial this down to 1L tomorrow. I adjusted a couple of ties to expose more bud sites. I had to move the light up again by 2 inches to accommodate for growth as it was sitting at 14" above the canopy. [24°C/52%] DAY 49 -------- Friday 19th February 18:30 I found the tent at 28% RH. No idea how that's occurred but I did notice it was hotter then usual this morning. I turned the dehumidifier of for a couple of hours and it jumped back up to 61% and so I will just set it to 55% RH. I fed the NL 1.5L of early bloom nutes which produced roughly 500ml runoff (33%) so it's looks like she may finally be bouncing back after the defol last sunday. [24°C/52%] DAY 50 ------ Saturday 20th February 11:30 The tent temp has been sat at around 23°C overnight somehow. The dehumidifier keeping the humidity around 45-50% seems to also keep the temps between 23-27°C. Saturday 20th February 18:30 I fed the NL 1.5L of early bloom nutes which produced roughly 600ml runoff (40%). Looks like i have a humidity problem and so ive reluctantly removed some more leaves from Jesus as she is bushy again after a week or perhaps I didnt defol enough. If I have the dehumidifier off the humidity is in the low 60s but if I lower it to like 45-50% then the temps stays too high between 24°C-33°C. [22°C/64%]
Likes
63
Share
@EasyName
Follow
I believe I could get thicker and taller buds, if I'd have done a better manifold. However she still produced very potent & stickie buds with a sharp aroma. Definitely a strain for all level growers 🤠
Processing
Likes
2
Share
Since the pot has a volume of 30l it takes a lot of time to create a big canopy. The plant also needs alot of time to fill up the container with roots. No extra nutrition in this week.
Likes
5
Share
reach for the sky!! Holy cow these ladies are going off. watch the time-lapse the end of week 3 and the stretch begins. the dark devils are showing the auto gene well they are stretching as well but not like the red poisons wow. going to le the dark devils dry out a little i think that strain does not like to much water. the red poisons are drinking like crazy. so already starting to flower at the end of week three. going to hold off on any flowering supplements for now to see if they are still eating the food that's in the mix still. cruising along see Ya next week.
Likes
53
Share
I flipped them to flower this week, finally. They are way behind schedule because I didn't have enough space to keep them on their own 12/12 light schedule so they had to stay on 18/6 along with the other plants in the same grow space. They've gotten much bigger than I wanted them to due to that. But I'm hoping if I do the female forced pollen process correctly that'll hopefully mean more seeds to share 😁. I've been spraying the chosen males with colloidal silver for 3 days now. I take them outside to spray them & then let them fully dry before bringing them back in with the girls. Just a safety measure incase I mess up the forced female pollen process I'll still have good & untainted flower to use from the girls.
Likes
24
Share
@Kirsten
Follow
30.12.24: So I finally became brave enough last night to use LST on my grow for the first time. Watermelon 🍉 is doing much better than the other plants were at this stage, and still better than one that's 7 weeks old already! I'm very pleased with this strain and phenotype so far. As I've implemented the LST much earlier for her, I'm very excited to see what happens in the next couple of weeks 😃 Thanks for checking out my diary 🙂🍃✌️
Likes
9
Share
June 28: Sunday Punch EV continues to impress with its rapid growth. I love the late veg stage where plants grow more than an inch per day. June 30: two inches in two days. July 2: hot today at about 33C.
Likes
50
Share
@Hou_Stone
Follow
3 Nori Cakes still there. who continue to grow 😀 This week I start cutting a few lower branches from each plant. This way more energy should be available for the upper branches. For this culture, I would like to let each plant grow with a main bud without "topping". I would like the tent to be filled and look like a Sog in flowering. (a total of 16 plants with 5 strains in this culture) My goal: at least 300g of dry buds🤞 ------------------------------------------------------------ 💧Watering each pot: Day 15 : 0.75 L With a little Bio enhancer ( 0.8grams/L) Day 21 : 0.75 L I use tap water, adjust the ph to around 6 and water ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 19-23°C (Humidity : 60-75%) Night : 14-17°C ------------------------------------------------------------ 🤩Equipment of the week : Light FC3000 Mars hydro. power 95% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop Heating mat 95x95cm. ON 45 minutes. OFF 30minutes. In a loop. The day only ------------------------------------------------------------ Thank you for your visit, it's always nice to see you!💚😀 ------------------------------------------------------------ My Instagram 🌱❤️️ : https://www.instagram.com/hou_stone420/
Likes
567
Share
MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA So it's been 17 days under the new MARS HYDRO FC4800 and the TSW2000 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. Its the NEW blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I'm in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. I CANT BELIEVE the amount of crystals the plants have already🤘 they just started getting bigger hair clumps and I didn't expect to see this much already👍 awesome lights do an awesome job. So it's looking good for these strains I made👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll Instagram: @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll Instagram: @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll Instagram: @marshydropenny Happy growing to all my friends 🤜🤛