Likes
Comments
Share
Mein Problemkind zeigt langsam erste anzeichen von Stretch. Riesige Fächerblätter... teilweise auch Interessante Muster vom Stickstoff überschuss zu sehen. Um den unteren Trieben für den Stretch nochmal die Chance zu geben, habe ich die großen Fächerblätter entfernt. Präventiv Neemöl gesprüht, weil ich ein paar Freunde gesehen habe. Spraymix alle 2 Tage. Heute wird auch die Lampe auf 12/12 umgestellt.
Likes
9
Share
Processing
Likes
12
Share
@Buurman
Follow
Last few days of vegetation. Think so far all is good, lost only 1 plant during germination, got some amazing looking babies and learned a lot by experimenting on them with help from this site. Topping and LST we’re both a big success! And the results don’t lie. It’s amazing to guide the growth this way. Gotta look into FIMming tho that failed :) Also it is kinda cool that I got a single auto flower OG Kush, nice to see that process too! Next post coming soon from the flower house!! Let’s get some buds!
Likes
13
Share
Day 14, some supercropping Day 15 .. it’s under control 😂🤣 Day 19 lights almost maxed to tent height unless I zip tie led to the top ceiling frame, last bit of monster cropping. Lost 2 top nugs to physical led burn but it’s ok. Everything is fine. Still going very hard on soluble N, and Pk along with b+, fishsh!t, microbial mass, humic acid. Carbs every day with organic booster
Likes
11
Share
15.08 Second week going great. The mimosa pheno I hunted is a true monster. Thick stem already nearly as big as the 1.5 inch rockwool cube. Easily over 1 m high. Stacking beautifully. I have a new setup for the 5x5 tent. Vevor EC fan 150mm. With temp and humidity controller paired with prima clima 900m3h carbocone filter which is huge. Also new Mars hydro fc e 8000 light with Bluetooth controller. So far very cool. We will see how it performs. Since I have co2 boosted we will have it cranking at max when the girls hit the bulk phase.
Likes
35
Share
@nonick123
Follow
Día 9 (10/06) N/A Día 10 (11/06) N/A Día 11 (12/06) Llueve mucho. Humedad alta por aquí. Eso les favorece Día 12 (13/06) Se empiezan a desarrollar las hojas verdaderas a una buena velocidad! Todo en marcha! 💨 Día 13 (14/06) Riego ligero 100 ml sólo H20 EC 0,5 en previsión del trasplante en el día 15 de la planta Día 14 (15/06) Se nota que estamos en el día 14 desde germinación y la mayoría de las plántulas van viento en popa! Día 15 (16/06) Hoy procedemos a trasplantar a las chicas a su maceta intermedia de 6,5 litros Se prepara con 5,5 Litros (85%) de sustrato PRO-MIX HP BACILLUS+MYCORRHIZAE + 1 Litro de Insect Frass (15%) + 65 gramos de Earth Vibes Super Soil (10 g/L substrato) Se llena la maceta de sustrato con las manos (limpias) y rompiendo los trozos más gruesos, para que el sustrato esté aireado y esponjoso, sin presionar Se coloca una maceta vacía de 1L para que quede la forma perfecta de la maceta donde están las plántulas (ver fotos) Se espolvorea la parte proporcional de la probeta de microorganismos sobre el agujero de trasplante Se saca la plántula de su maceta actual (bonitas raíces 😍) y se coloca en la maceta final Se riega muy lentamente hasta percolación profunda con H2O EC 0,5 pH 6,5 Se coloca mulch (acolchado) de paja para evitar traspiración excesiva y cuidar a los microorganismos del suelo A ver como reacciona al trasplante! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
47
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Likes
60
Share
@m0use
Follow
This week has gone well, had a bunch of stuff typed out and closed my browser by mistake and now this is #2 attempt to post this week. Easy week for the plants, they have being growing well and I am impressed by the size of them. I added in some potassium silicate to introduce some Si into this grow. I decided to top them as they where starting to grow their 4th node, snipped that tip off and we're golden. They are kinda smelly if you rub them and that's fun too, Some of the hot peppers have also popped up and started growing. I still don't have anything on the Naga Morich pepper that I am hoping for. I have a feeling that as the seeds I got from these peppers where from a dehydrated pepper, they might be duds nuked from the dry heat of the dehydrator. I do have 4 vials of hot pepper seeds where the label has fallen off, I found the labels but no idea what one goes on what bottle. One out of the four bottles is Naga Morich, Having some none dehydrated seeds in my possession is one step closer to getting more of this hottie. I also found a fly out of no where, Its little wing is damaged and it more or less hops and glides unsuccessfully vs fly's but I took some videos of it. I also seen a few fungus gnats, little fuckers where not in my apartment before I am convinced their eggs survive in the stuff I buy then come out of it. Kinda annoying. PLUS I borrowed a light meter from my hydro shop, I was expecting it to be a LUX meter and that I would have to do a bunch of conversions but it was not, it was a legit Quantum Par Sensor, detecting in PPF "Photosynthetic Photon Flux" or umols/s, with these readings I can calculate my PPFD "PPF+Density" I have mapped out my tents floor into a colour coded grid of dots and mapped out the PPF at varying heights and dims. However I did not do it right and need to redo this. But once this is done I will have a functioning PPFD map with relation to my tent. This will help me tone in DLI and get it aorund a solid 35-40. Will be gearing up for a transplant next week. I try and post on Fridays but don't always get around to it. I take the pics on that date though and then try and remember what I was going to write about that week. PS Gorilla Tent Accessory's suck shit. The SCROG nets pic has the gorilla 2x4 SCROG net "black" and the Secret Jardin 2x4 SCROG net "white" beside it. massive difference in quality and size. I should have known when they state on the label its for 2x2 or 2x4, that's not even possible. Also tried out the nutrient line that's part of the gorilla tent company, Lotus, I ran it one year and it was just trash, did not work, had issues since first week and they would not correct. Buddy reached out to me and said same thing happened to him and he disliked the brand. Big shoutout to Medic Grow for sponsoring the lighting in my tent, They have provided me with 2x Mini Sun 2's in the 240w configuration, They use the v1 growing spectrum that is a all purpose seed to harvest spectrum so their is no hassle of switching it mid grow. If you interested in learning more about Medic Grow products please visit the web link below. https://medicgrow.com/ https://growdiaries.com/grower/MedicGrowLED
Likes
8
Share
Skunk hero is the stinky stanky sticky beast the world needs!
Likes
49
Share
@Roberts
Follow
I am dropping a RSV11 from Terpyz mutant Genetics. I ightly scuffed the seed ends, and dropped it in the water. I will wait 24 to 48 hours or as soon as I see a tap root. Nothing else to report on at the moment. Thank you Terpyz Mutant Genetics, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
31
Share
They looking good, but temp is a little too high. It is what it is One of the plants (In front to the left) is more frosty, with less amber pistils. But overall the trichomes are starting to go from crystal to cloudy. Which is my timing for start flush. 24/7 -Temp 23-26day/21-24night -47%RH (2+-) 25/7 Water day* start of flush Gave them till run through with plain ph balanced water, and topped it off with some light nutrients-mixed water. -Temp 23-26day/21-24night -49%RH (2+-) 26/7 -Temp 23-27day/21-24night -47%RH (2+-) 27/7 -Temp 23-26day/21-24night -47%RH (2+-) 28/7* Water day / flush -Temp 23-27day/22-24night -47%RH (2+-) 29/7 -Temp 24-27day/22-24night -47%RH (2+-)
Likes
67
Share
@Ageddd
Follow
_____________________ | ROYAL CHEESE HARVEST | |_____________________| Whats up!! Harvesting a little earlier than when i would like, because of the rise of bugs that appeared last days due to climate conditions... this year temperatures are oscillating more than usual having 1 rainy week, then a sunny hot one just after it rains.. In fact, last year, it did not rain until November So the plagues were on the leaves, mildew powdery(just a coulpe of leaves),aphids(like just in the leaves of one cola), and some caterpillars almost ready to get out and start eating all the buds, (hopefully i cut that day).. Sounds bad, but the parts of the plant affected was only the leaves... and means that a proper cleaning is coming so removed all the leaves and the result is what you can see, that bonsai.. Spotted 2 dead material points in big colas, that i removed after drying.. I did not weight the plant wet because of the smell that i had on my house that day, things went very tense, i was a bit busy, and even, it has not much sense to me, im better weighting the dry material. So at the end i think im having very good quality, and the affected parts are less than i thouth at first, so im very happy with the results.. On the scales are the best buds, the rest is the lower part of the colas that were less developed so im doing hash with that part.. Been busy guys so im uploading more photos today ^^ I hope you like all the grow thank you for follow it :) Song: Eazy-E - Down 2 tha last roach00000
Likes
3
Share
@tterpy
Follow
Fed with water 6/17/26
Likes
3
Share
@Cultiv8or
Follow
Brought them inside this week and borrowed a Dehumidifyer. I’ve been able to get RH , 45-55 now and the resin production has already started increasing
Likes
11
Share
@Dunk_Junk
Follow
+20cm vertical height change this week. Flowering stretch slowing down. That's bad news for me after her first 3 weeks being very slow growing. I missed the window for good veg growth by (I think...) low temps in the tent. As a very small plant cold roots stunts growth. Being an auto you cannot extend the veg period so I'm stuck with her being a very small plant. Nutrients as above added to 10L water along with 5g of 20-20-20 powdered fertiliser. Still... if we're always learning nothing is lost. Just data in the memory bank.
Likes
1
Share
@ShortyV12
Follow
Harvest Day ;))
Likes
10
Share
Cette semaine c'est bien passé gros développement des plantes.