Sour diesel is such a beautiful plant, with a robust structure and strong lime flavor.. full of terps.. the main bud looks a big rock.. might be the biggest main bud I ever had.. super frosty and definitely a genetic I will want to grow again.. can’t wait to harvest this baby.. I’m gonna flush it very soon, probably next watering.. plant is definitely going to the last weeks/days.. let’s go

Our Rainbow Sherbet of course from Zamnesia like all my plants has been the territory of realization for an exceptional mainfolding. After a topping that would seem very premature at the second internode (But that in autoflowering is also appropriate to delay flowering) I managed very well to make the lateral branches grow parallel to the ground. They form a T with the main stem that comes out of the ground a little. It seemed like it should be low, some joker even joked about it and instead it is becoming a nice little monster. It made the lateral branches start and all that then worked with a successful main lining on which I made the only mistake of leaving a little too much stuff at the bottom that I am cleaning up little by little as I understand that it will not see much light or will not produce satisfactory flowers. The main stem that runs parallel to the ground is very beautiful to look at and is from the main lining manual. The structure created with mainfoldindg, mainlining, topping and lst vari is very pleasant, the plant is at medium internodal distance and flowers quickly so it is a plant on which I would feel like recommending these techniques that it is true that they can slow down the harvests but they give a satisfaction to the sight and an unparalleled fun in making them. We are still using soil, fertilizers and all the additives recommended by Plagron 100% organic. We are still in the early flowering program that maintains the same additives Power Roots, Sugar Royal, Pure Zym and adds the flowering stimulant Power Buds. Obviously the basic fertilizer is now Alga Bloom. The Green Sensation hero of the late flowering will arrive and at the same time it will be time to remove power roots and a week later the enzymes. (The plant left to grow straight and straight ahead of time has been taking it for a while) ---- Decide on the right soil and calculate your fertilization schedule according to your soil on the official website. -- www.plagron.com Try a seed of this variety that drives us crazy.. ---- https://www.zamnesia.io/en/11230-zamnesia-seeds-rainbow-sherbet-automatic.html Zamnesia Description //A cross between Pink Guava, Sunset Sherbet and a hint of ruderalis, Rainbow Sherbet Auto offers a wide range of flavors, effects and more. This 70% indica-dominant strain reaches considerable THC levels (24%) and is suitable for both experienced growers and those taking their first steps in the world of cannabis cultivation. All the best that mother nature has to offer is on ---- www.zamnesia.com

Week 14 (1-5 to 7-5) 1-5 Temperature: 28.2 degrees (lights on) 22 degrees (lights off) Humidity: 62% (highest) 46% (lowest) No pictures. 2-5 Temperature: 29.2 degrees (lights on) 20 degrees (lights off) Humidity: 61% (highest) 48% (lowest) Removed the net, and tied down some branches to the pot with some gardening wire. This way i can easily remove the pots out of the tent to weigh them. I also moved the oscilating fan from underneath the canopy to above the canopy. This is because the leaves gets hotter as i increase the light's power output. The Gorilla Kush #2 and the Chemdog #2 are showing some heat stress. Installed a valve on the autopot from the Kush #2. This is because its weight is higher then the other pots. Before i watered them i weigh the pots. Dry weight: Gorilla Kush #1: 4.4 kg Gorilla Kush #2: 6.0 kg Added 10L to the reservoir. Opened the reservoir for a couple of minutes. 3-5 Temperature: 26.2 degrees (lights on) 19.9 degrees (lights off) Humidity: 61% (highest) 47% (lowest) No pictures. Increased the light's power output to 75% LUX: 16.000 / 20.000 4-5 Temperature: 26.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 59% (highest) 41% (lowest) Opened the reservoir for a couple of minutes. 5-5 Temperature: 27.6 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 47% (lowest) No pictures. 6-5 Temperature: 27.6 degrees (lights on) 20.4 degrees (lights off) Humidity: 60% (highest) 42% (lowest) Dry weight: Gorilla Kush #1: 4.4 kg Gorilla Kush #2: 5.4 kg Added 10L to the reservoir, there was still 2850 ml left in the reservoir so now its almost 13L. Opened the reservoir for a couple of minutes. (Only Gorilla Kush #1) I also lowered the Gorilla Kush #2 a little bit, as she is showing some heat stress. The bud development of the #2 is very mediocre, some buds show some THC, and some buds have almost none on them. I am sure the yield will be low, so i will probably make some hash with the #2 7-5 Temperature: 27 degrees (lights on) 19.8 degrees (lights off) Humidity: 57% (highest) 44% (lowest

Day 44 (Jan 10 - Flower Day 10) More of a maintenance day. The focus was keeping the canopy flat and even while the plant continues to push. This is where the tent starts feeling smaller every day. Day 45 (Jan 11 - Flower Day 11) At 02:30 I measured EC 1.466 (1466 µS/cm). At noon, after a top-off (this time with fertilizer included), I landed at EC 1.480 and pH 6.19. Day 46 (Jan 12 - Flower Day 12) At 12:15 I measured EC 1.512. After topping off I ended up at pH 5.75 and EC 1.462. Later I decided to push the reservoir strength up, briefly saw a higher number, then did the right thing: I waited for proper mixing. After 15 minutes of circulation, the stable reading was EC 1.612 with pH 5.88. Canopy-wise she’s starting to look like a literal square under the trellis - which is both hilarious and satisfying. Day 47 (Jan 13 - Flower Day 13) At 00:30 I measured EC 1.618 and pH 6.30. I topped off ~1.5 L of pH’d water and rechecked after circulation: EC ~1.620 and pH ~6.06. After that I adjusted pH down to 5.69. Day 48 (Jan 14 - Flower Day 14) At 00:30 (before top-off): EC 1.622 and pH 6.16. Water level drop was about 2 L out of roughly 9 L, so definitely a big drink. I decided to top off with nutrients this time. After the top-off and ~15 minutes of circulation, the reservoir landed at pH 5.74 and EC 1.720. Canopy / space notes (Week summary) The canopy is getting extremely even and wide — genuinely “square” under the trellis. I’ve been leaf tucking and I also weaved two tops sideways under the net to keep the canopy flat. Height management is now a real factor: the plant is around 43 cm tall even while being woven into the trellis. The good news is I can now rig the light up to about 90 cm above the bucket, which gives much more breathing room than I originally thought. Week takeaway The plant is clearly in a strong stretch phase (big daily growth, big water consumption). The reservoir has been stable when I’m careful with mixing time, and the trellis work is paying off — the canopy is filling the tent efficiently and staying controllable.

Well, these girls are well on their way into bloom. They are really stacking it on since the addition of the worm castings. I strongly suggest everyone use worm castings in your soil mixes, even if you are using salt-based nutrients.

2 of the cherry cookies are ready to be chopped very soon. The other has a bit of time to go. They're looking good and smelling good. Happy with them

Happy to hav seed harvest stoned @chedderbob112

Ok

Nearing the end. Defoliated and pulled apart the mass of buds that had all grown into a single main cola. I didn't notice but there were multiple buds all cramed together, blocking out light to the inside. After pulling them apart and carefully tying them down I have been able to increase the airflow, trichome, and overall size while also decreasing the excess nitrogen that had built up in those cramped bud sites. Did all this about 5 days ago and ahe is getting even better. Just a few days left. Also, I cut off a little piece yesterday just cause I'm so desperate. Lol. Next update will be harvest!

Day 1 of flower

08/26 - Increased water feeds with increased nitrogen - Prepped using clonex mist and clonex gel for cuttings - Pulled 10 clones on the first gen set 08/30 - New cuttings taken today - 23 in small solo cups for rooting - running high humidity dome - Feeds are as normal.

Plants doing good clones have roots but not all guna wait 2 more weeks b4 transferring to new containers …one plant needs more food guna increase ppm

Gorilla glue is finally finishing up was a finicky one from the start Straw berry pie is getting super frosty not a big fan of the bud structure

Inicio de la sexta semana y así sigue el avance de la floración. Ésta plata ha crecido a un ritmo impresionante y apesar de ser más pequeña en un inicio que su compañera de tienda, ha superado su tamaño notoriamente. Todo sigue bien y sano como se esperaba. Buenos humos! 👽

It is the waiting game for this lovely lady. Everything is on her side but time, as I must harvest within the week. I am flushing for this last week for the 1st time.

I placed the 2 seeds in a damp paper towel and placed it into a closed Tupperware. The tupperware was placed in my stereo cabinet (warmest place I could find) and less than a day taps roots were showing. I then placed them in my humidity dome and within 18hrs I had roots sprouting thru the bottom of the sponge. This has been the best start I have yet to have. I also built a new RDWC system with waterfalls to veg and flower these two in. I have photos and video above on the new tent setup. I have it running with just regular tap water until the seedlings are ready to go in. I have also installed a 90gpd RO system (APEC brand) under my kitchen sink. The water comes out 5.8ph and 7ppm. I will be using this RO water thru the entire grow with some Cal-mag of course. The system holds about 25 gallons total of water. The main res is 17 gallons and the two buckets are 5 gallons. I will no longer be using air stones. I have a recirculating pump in the main res, waterfalls in the buckets and of course the main pump running the whole system. Should be plenty of air for the roots. I used 2 in return pipes in the hopes of avoiding roots clogging the pipes. I scrogged last time but I'm not sure I will be going that route. I might just top and train. I will be doing a major defoliation on one and just simple trimming on the other. I am trying to find out if the risks of stressing the plant are worth the returns. Well wish me luck....and away we go. Equipment used on this grow: VIVOSUN 48"x48"x80" Mylar Hydroponic Grow Tent AC Infinity CLOUDLINE T6, Quiet 6" Inline Duct Fan Grower's Choice Horticulture Lighting with Full Spectrum 315W Ceramic Metal Halide Kingbrite diy 240W lm301h qb288 v3 led grow light PHILIPS 901573 Master Color CDM Lamp 315 Watt Elite MW, 4200K (Blue) PELONIS PFT30T2ABB-V Portable 3-Speed 12-Inch Oscillating Table Air Circulation Fan, Bluelab Guardian Monitor for pH, Temperature, and Conductivity Measures Power Strip Surge Protector, Anker 12 Outlets & 3 USB Ports hygger 1060GPH Quiet Submersible and External 24V Water Pump, with Controller Marineland Maxi-Jet 600 Midea SmartCool 8,000 BTU Wi-Fi Window Air Conditioner (will be running a 4 inch tube into tent from a/c) All hardware and buckets were bought from Lowes. 1in & 3/4 in for supply lines 2 in for returns

The week went really well and we are starting strong into week 3. The King's Juice Auto #1 is giving me some worries because she's a little bit small. Also, I saw an aphid on her. Never underestimate green light spectrum guys! Speaking of light... I raised the light intensity up to 30% (80W) and will keep doing it like this until I end up with a DLI of 40-45. With 19 hours of light that would be roughly 60-65% of light output. Interesting. From the side view, I think #2 is my favorite but overall it's still #3. Still unsure what kind of training I should do or if at all. Alright, I trained them and tried some different strategies. I topped #3 because she was by far the tallest one anyway, I "lollipopped" #1, so that she hopefully pushes more power into the upper part and I just tucked the fan leaves of #2 under the branches. At least as far as I could. #2 definitely has some lovely growing! She also has the first white hair coming out. Will try to get a photo of that later, hopefully with my new wifi microscope. Should be delivered tomorrow. Wasn't delivered but how she develops, I don't need the microscope. First set of white hairs is clearly visible! I'm exited to see how they continue to develop.

28.7 D78 1.1L watering PH 7.0 EC 0.4 Return PH 6.1 EC 1.5 D81 31.7. ✂️ I wanted to harvest her with slightly not mature trichomes. Compare to other plants of this strain. Flush of pot after harvest. PH 6.5 EC 0.4 1L return PH 5.7 EC 0.8 5L return PH 6.5 EC 0.7 16.32g.