Lamp Brightness: 75% @ 26.2" - estimated 560 PAR Feeding schedule once-a-week, all other waterings strictly water-only IPM 4oz per gal EM5 solution foliar spray + applied directly to mulch/cover crop (before lights-out) - once a week Feeding: 1/8 tsp per gallon yucca extract 1/8 tsp per gallon big 6 micronutrients 1/2 tsp per gallon rootwise mycrobe complete 1 tsp per gallon grower's secret organic soy hydrolysate Day after feeding, soil is given a sst of organic fenugreek, lentils, kamut, mung, and adzuki beans Note: mulch layer too thick, had to disturb during the week and re-apply 12 seed cover crop for posterity, at the end of week 4 clones were taken of each plant genotype

Day 43 Lowered grow dose Increased bloom & top max Replaced rhino skin with big bud buds are stacking nicely, pistils are exploding, and frost is coming in. All 3 plants showing slight stress which I believe is from the strong 600w HPS light. Nothing of concern, however not a lot I can do as light is already as full height, however Will Increase air flow more upward. Day 44 Frost has arrived. Bud sites really started to fill out now. Drinking 3L every 1.5 days. Last feed was no grow as wanna cut back on N, and a 50% feed of other nutrients to reduce nute burn. Very happy with progress so far.

Starting a new cicle. One of new money is 1 week younger. The Mid cicle is ready to flip The final cicle is near from harvest, maybe on 14th february. some crosses of a male Girl Scout cookies with : White widow, Industrial plant, White diesel and (White fire og x bubbakush )all made in 2014.

Das ist Weltklasse. Damit könnte ich international an Cups teilnehmen.

Привет друзья. Моей растихе сегодня 34 дня. Начал применять LST технику на 19 дне и продалжаю применять её через день, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ делаю каждые 3,4 дня С 20.08 LST технику делаю каждые 3.4 дня На сегодняшний день влажность 63% Растение растёт хорошо. генетика радует. Всем мира и добра! #Smail_Seeds

Start of Week 3. Been an awesome first 2 weeks.😎 I have learned more than I thought possible. I want to thank everyone who has helped me.🙏 Gonna start LST later in the week. 💪 Will be updating throughout the week. Happy Growing! 🤙💚💪🌱😎🌱💪💚🤙

The Apple Betty girls have performed very well this week! The LST began, and there was some great growth in side branching. I also started this week off with introducing them to some nutrients ❤️ Start of week 4, the girls had responded well to transplanting, so I decided to start with some LST. My main method is to use soft wire wraps (dollar store purchase!) I poke one hole in the side of the pot near the top, and then go directly opposite that hole and poke through to make another. The first hole is for a wire wrap to secure the base of the seedling from pulling right out or over too far. The other hole is for the direction you want to bend your plant to. I start by slowly working the stem between my fingers at the point where I want it to bend. Twisting and pinching slowly so not to snap. *wait a day or two after your last water, or it will be easier to snap* once it’s ready to flop, I use the wire tie to hold down the top of the plant as close as I can to the nearest shoots. I’ll usually leave the plant like this for a couple of days, adjusting the ties, and then take them off to let them recover . Watered with a small dose of the full line of Advanced Nutrients I will be using for this grow. The girls got about 500 ml at the beginning of the week, but 2 days in I could tell they wanted more. By the end of the week they are taking nearly 1/2 gallon (which will give me 10% runoff) At the end of the week I increased the intensity of the BP2500 to 190 watts at the wall and the girls did show a few wrinkles as they adjusted, but have quickly recovered. I haven’t topped these girls, and I’m not sure if I am going to… thoughts? Happy Gardening 🇨🇦❤️🌱😎💨

KICKASS AUTO by KANNABIA Week #6 May 7th-14th Week#1 Flower This week she had continued to stretch both vertically and horizontal her side branches all have multiple bud sites on them she's a really bushy plant looks like she's going to produce a nice harvest. She's looking 👍 good no issues being outside she's actually thriving ✨️ right now. Stay Growing!! Kannabia.com Kickass Auto

En esta 7ma semana de floracion, aparecen tonos purpuras, en algunos cogollos. Aroma afrutado..dulce.. según el banco son 60 días de floracion, asique ya falta menos.😅😅

In all honesty I'm not sure if I got the nutrients dialed in . I tested runoff and it was all within range of soiless mixes , calibrated my ph meter every watering as I thought maybe that's why I was getting yellowing leaves . They are still growing and budding rapidly and seemingly on par with what I've seen with others in like mediums so I'm trying not to worry too much . My carbon filter shit the bed already so my Mrs isnt happy with me today as my whole basement wreaks . The plants went from not too bad to wicked bad smelling within a couple days . I've been defoliating but do you think I should do more ?

The plants are now growing slower in height and start to develop real flower clusters at all tops. Both Barbarian (=AK-47 x Barbara Bud) plants are bushy with lots of budding sites, but plant#2 is now 15 cm taller than plant #1, which is a little more bushy than #2. Both plants are healthy and still enjoy the normal recommended feeding schedule from Advanced Nutrients.

Gorilla cookies and cherry cola are both hitting flower hard! The smells are pungent,the buds are sticky and the stems are strong! We’re getting nice fat buds on cherry already and gorilla isn’t too far behind her. They’ve taken very well to the feedings they’ve been given and all training done to them. So far I’m loving both of these strains 🔥🔥

Yay! Finally they get space in the bigger grow room, been waiting for weeks. The few mother's that were still flowering were able to fit into the tent. Many of the seedlings were ready for transplant so I made room for them in the clone closet as well.

Having a hard time deciding when to chop her..my second critical..Milky trichomes but not a single amber on the calyxes…the buds have definitely gone through a burst..becoming thicker and dense..some buds falling over so I tied the base with string for support. This week so many white pistils have popped out and sites like reddit or roll it up are telling me some strains have white hairs up until harvest while others claim more time is needed. I think I can wait one more week but after that I’m over it!

See comments in videos. I will say, I am loving my AutoPots. It has taken a huge burden off the growing process, not having to water everyday or every other day. So much, that I have purchased a 4 Pot XL system for my smaller tent. Grow easier, with #AutoPotUSA.

Flowering days 57 to 63 Power Clean at 5ML/L for all plants. I cut everything off at day 63. Everything is now drying. Drying condition: 15-18° - 60% Humidity. See you in 15 days for the weight and pictures of the dried buds.

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Welcome to Flower Week 9 of Divine Seeds Divine Rapier I'm excited to share my grow journey with you from my Sensi Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Divine Rapier: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧Strain Info : 29% • ⏳ Flowering Time: 6-7weeks

Day 56 - She grew 6cm this week. Growing well. Not much for me to do. Day 56 - Tent configuration changed: 4x more CREE CXB3590's have been added and 4x blurple LED things removed. Lights now consist of 8x CXB3590's & 1x 1000W HID with flower bulb.

Day 70 The plant stands around 40 cm tall now and is showing strong vertical growth. The structure is well-developed, with several healthy tops reaching up toward the light. Leaves look vibrant green and perky overall, with just a slight downward curl on a few tips — possibly from watering or minor overhydration, but nothing concerning