Likes
Comments
Share
This phenotype #4 was removed from the grow tent after 2 weeks of veg due to a deficiency I'd never seen before. From what I've researched, it could be sulfur; it didn't seem to be a disease, but it produced excessive resin.
Likes
12
Share
@Pauwela
Follow
Started clones on 5/6 from trim cuttings on 4/24, used Root Riot starters and Klonex rooting gel, got amazing root action
Likes
2
Share
7/27/25- Week 7. I see flowers starting on the plants but they are probably just pre flowers but actual flowering is close now. I just fertilized them again with the above nutrients in a 5 gallon bucket. We went from a heat wave and drought to plenty of rain at the end of July so they are approaching 6 feet tall now and just big bushes.
Likes
8
Share
@TrueNorth
Follow
-Strain: Purple Lemonade - Fast Buds -Tent: 5x5 Gorilla Grow Tent -Lights: Budget LED Grow Lights 2 x 250 Watt LED Full Spec/Red Spec mixed boards -Light Cycle: 18/6 -Soil: Fox Farm -Air Circulation: AC Infinity Cloudline T4 Inline Duct Fan WECLOME BACK GROWMIES! Week 9 here with our GELATO AUTO by Fast Buds! January 21, 2020 (DAY 59) - Hey there growmies welcome to a fat week of large colas and frosty nuggets! Our lady is growing amazingly, stacking up big time and becoming so beautiful. i remember all the struggles and here we are with such beauty
Processing
Likes
3
Share
Every week I watch my girls grow into beautiful budding trees only difference is now she in flowering I take her outside to absorb some of the beautiful sunshine and she's loving every bit of it. I let her stay outside for 8 hours in nature then back inside for another 8 hours of led full spectrum and turn out my lights for another 8 hr she's an Auto so she loving every minute of this ...... this is the results ⬆️
Likes
6
Share
@kevxyn
Follow
Die Kleine hat sich nach der Entlaubung letzte Woche wieder super gemacht! Ich lass sie noch ’ne Woche schieben, dann geht’s in die Blüte 😎🌱
Likes
31
Share
so the development on this lady has been VERY slow and has made very little bud production at all she also did not really stretch out at all from flower her buds are at the same stage at week 7 then the blackberry was at week 2 really , she is showing nor has all her life of any deficiencies what so ever , she has stay very short and stocky with good leave production " before i defoliated she was a real nice little bush " she smell amazing and the only was i can describe it when i touch her sugar leaves is exactly like chewing on the lemon "yellow" skittles sweet so can see exactly where the name came from for this strain. she as you would expect has not been drinking a great deal and i am still able too only feed her 8 pint of feed per week where as her sisters are taking 14 pints , but other than her staying small and not wanting too really produce yet she has been easy too grow even for a newbie such as my self and has been trouble free ,
Likes
5
Share
Hi liebe Community and Welcome back! 💚 Jetzt war es Zeit für den Trichomcheck und ja, es sieht genau so aus, als wäre die Pflanze exakt in der 8 Wochen Blüte Range. Nächste Woche ist es dann endlich soweit und die DMO Grapefruit kommt unter die Schere ✂️. Ich habe die Pflanze nochmal Stark ausgedünnt und es zeigt sicher eine sehr stark ausgeprägte Blütenstruktur. Absolut im XL Bereich. Es lässt sich beobachten, dass die Blütenbildung im mittleren Bereich der Colas stark ausgebreitet hat und die Pflanze Richtung Spitze eher etwas dünner wird. Sie bildet die Blüten sehr vielseitig aus, von dünner kompakt bis hin zur breiten dichteren stellen. Ihr Geruch ist nun sehr stark ausgeprägt und eine Grapefruit Note zeichnet sich als markante Hauptnote ab. Abgerundet wird dass ganze durch etwas skungige, Säure und etwas Zwiebel/Pfefferigel Noten. Auch eine leichte Süße Komponente kommt etwas hindurch. Die Wachstumsbedingungen im Growzelt sind aktuell wieder super! ——————— 🌞 Temp: 23°C 🌚 Temp: 20 °C 💨 RH: 53% VPD: 1,00 kPa 😎PPFD: 830 mqm ——————— Stay Tuned! 💚
Processing
Likes
5
Share
@Noxey
Follow
First week setting up my DWC! Assembled the reservoir and cloner/seedling starter and figured out temperature control while waiting on the seeds to be delivered. June 8th, PM: Started germinating the seeds. Germinated in paper towel for 3 days. June 12, afternoon: Transplanted seedlings to the cloner to start seedling growth June: 16, morning: Transplanted to their final reservoir. June 16th (end of Week 1) is really the start of the grow, as it's when the seedlings finally made it into their res. This week was more a "Week 0".
Likes
104
Share
Letzte Tage vor der Ernte Auch hier in den letzten Tagen kaum noch Entwicklung. Die Pflanze stand optisch fertig, hat aber nicht mehr wirklich weitergereift. Foxtailing lief weiter auf bereits entwickelten Buds, ohne dass sich die Reife sichtbar nach vorne bewegt hat. Der Chop erfolgte ebenfalls aus praktischen Gründen, da ein weiteres Warten keinen klaren Mehrwert gezeigt hätte. 👉 Optisch fertig, aber ohne echten Abschluss. Kurzfazit: 👉 Unruhiger Finish-Verlauf ohne klaren Reifepunkt. Grow on 🌱 Last Days Before Harvest Again, very little development in the final days. The plant looked finished, but did not continue ripening in a meaningful way. Foxtailing continued on developed buds, without real progress in maturity. Chopped as well for practical reasons, since waiting longer showed no clear benefit. 👉 Looks done, but never fully completed. Quick summary: 👉 Unstable finish without a clearly defined ripening point. Grow on 🌱
Likes
1
Share
Looking little drippy so I water with ph on 6.5 and raise the light about 25cm later I start lst she looks a little def too don’t know if it’s cuz of water or mb a bug issue.
Likes
2
Share
@PapaTerps
Follow
Wizard Fuel - Wizard Trees Day 91 - Watered with 3L of RO tap water with nutrients mixed individually, in order and then pH'd to 6.3! A small amount of defoliation to improve light penetration, and that's about it - she's still bulking, but it has slowed down significantly, so from the end of this week, she will start her flushing phase 👍🏻 Her flower is absolutely beautiful, big heavy and hard baseball sized flower with a beautiful lime green hue, she smells candy and fruit 👌🏻
Likes
23
Share
Its done! Even though I expected a higher yield, I'm happy with my first harvest. It could have gone worse. Got 61 grams of the biggest plant, it took eternities, but the yield is pretty decent for a first grow. Thanks WSE! Next up will be Strawberry kush and Harlequin.
Likes
175
Share
Day 1 Flower (Day 43) Wooohoooo! First day of flower! I decided to flip both plants after all. The thing is that I will be fully vaccinated against Corona by mid-July, and when that is done, I'm off on vacation. After 1,5 years of this pandemic crap, I'm more than ready to travel again, to see the world, meet new people, and have new experiences. So yeah, this strain is supposed to be a fast flowering strain (45 days!), so mid-July should do it. I switched to the Flower Induction light recipe in my main tent, and I will let that recipe run for some days before I switch over to the regular Flower recipe. The tiny tent has nothing so fancy and was switched to a regular 12/12 schedule. Speaking about lights. That cheap budget light that I bought for my veggies when I moved in my ViparSpectra light into the tiny tent broke down after only two days. So much for trying to save a bit by buying something cheap. I've already sent it back and won't get another light as I think the tomatoes and chilis are ready to move outside. I'll wait and buy this fall instead, but I won't go for the cheapest light I can find then. lol I was foliar feeding the girls with filtered compost tea while they were still sleeping. I only spray when the lights are out to avoid any leaf burns. A few hours later, after the girls woke up, I gave them each around 3 liters of unfiltered pH 6.2 compost tea. I FINALLY remembered to pH the compost tea. Woooooo!!! That was all today. Day 2 Flower (Day 44) Today was a really busy day. I opened the tents, took pics, closed up the tents. Phew! Exhausting. Day 3 Flower (Day 45) Alright, today was a bit more work than yesterday but still fairly relaxed. I watered the girls; the left one got 3 liters, and the right one got 4.5 liters of pH 6.0 water. I noticed a bit of light bleaching on the girl in the small tent, so I turned down the light a bit and increased the distance to the canopy. It is very tight in there, but that is expected with such a small tent. I will need to raise the light more in the future, and I'll probably have to resort to a bit of MacGyver-ism to make it work but that's a problem for a later day. The girl in the main tent has a bit of an uneven canopy where the left side is taller, so I raised the left light as the light level was around 1300 PPFD. I also super-cropped half a dozen branches to slow them down and let the rest of the canopy catch up. It's probably the last training I do before the girls go into flower. Finally, I did a bit of defoliating by removing a few leaves that weren't getting any light low down on the girls. Day 4 Flower (Day 46) Fuck. Disaster struck. I opened the main tent today and found that the CO2 bag had fallen down and broken one of the main branches. That one branch is responsible for about a quarter of the canopy, so losing it would suck. I got busy right away taping the broken branch and used some old chili stalks to support the branch further. I also watered it with around 1.5 liters of pH 6.5 water hoping that it will be beneficial. Now, all I can do is wait and hope for the best. For those of you who have been following this diary, you already know that I dislike this CO2 bag because it smells like shit. Literally. Now though, I really hate this friggin shit bag and its weird hanging contraption that is as shitty as the smell from the bag. Day 5 Flower (Day 47) So far so good. Last night, I checked in on her a couple of hours after I taped the broken branch and the left side of the canopy was already back up with no drooping leaves or branches. YES! However, it was still nerve-wracking to open the tent today but she looked just fine. Fingers crossed that it holds. Naturally, I don't want to disturb her much right now so all I did today was to water her and carefully LST a couple of branches that got messed up yesterday. I gave her 2 liters of pH 6-0 water and 1 liter of water to the girl in the small tent. Speaking of the small tent. There's some light bleaching on the tips of the leaves closest to the light so I turned down the dimmer even further down to 40%. I need to try to raise the light but can only gain another 5-7 cm. The tent is soo tiny lol. Will be interesting to see if she will even fit in there after the stretch is done. I also raised the lights in the main tent as the canopy was getting a bit close. That was it for today. Day 6 Flower (Day 48) Chill day today. All I did today was to water the girls 3 liters each of pH 6.5 water. Day 7 Flower (Day 49) Today was the end of a rather tumultuous first week of flower. It looks like I got lucky, though, and that the branch on the right girl will survive. She is growing strong and loving life. I am hopeful. She is a big girl and drinks a lot, so I'm watering her every day (around 10% of pot volume), and I gave her 3 liters of pH 6.4 water today. The left girl didn't need any, so I just measured both girls, snapped some pics and videos before zipping up both tents. The left girl is 50 cm tall (12 cm increase in a week), and the right girl is 77 cm tall (31 cm increase in a week!)
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
Comments
Share
Day 84 from seed Each auto is in different flowering weeks So post is sorta confusing as my first diary Sorry! Everything seems to be doing good. Just been feeding water since last update. I will have new lights soon 4800 evo from mars hydro 2024 version planning to harvest the GDP before switching the lights out. Day 87 swapped the light to the mars hydro 4800 evo 2024 model running 40-50 percent 12-20 inch from cannopies adjusting them slowly to new light and much higher pffd than before
Likes
7
Share
Wow! Super fun strain to grow. Smells like stawberries and cream. For real. It is mindblowing. I hope fresh frozen live rosin will be fire when I'll make it in a week. Very sturdy plant, but not very resistant to high temperatures - some phenos tend to foxtail then. But apart from that it is one of the best I've ever grown - up to par with MAC1 👽 or Grandpa's Cookies 🍪 Top tier terpenes and resin production. I love it 😍 It is my personal record - 3064g (wet) from 3 plants from 4x4ft tent 😎💪 Should be ~800-900g of dry flower if I'd ever dry it (but 99% of it is ment for fresh frozen bubble hash and rosin pressing - flowers are already in deep freeze apart from small 10g sample I'm drying normally). Seeds are not cheap - you have to but 20, but I highly recommend this cultivar. Yield blown my mind. I hope it'll taste and wash as good as it smells 🙏
Likes
10
Share
Continue to defoliate as needed. Plants FINALLY stoped stretching. Longest colas are 28 inch with avg of 20. Smell is Wow! Need to get in there and thin it out... Again. So far everything I've learned from GrowWeedEasy is spot on. Last grow in this 28x55 with 2 plants was 10oz on the nose. Very excited about these 3 girls. Even the big fan leaves are getting frosty. Love it!
Likes
12
Share
Well she is putting on the height and buds have been forming up nicely ... Good to see some buds again in my tent been to long . The smell is fruity to me and she shows no signs of slowing yet lol those bottom branches are reaching up as well. I love resilience of these plants she takes transplanting well and ph issues all my fault ... I'm still learning but getting better every week and so will she ... Till next week cheers family and grow on ...