Likes
Comments
Share
@Flavors
Follow
🌾 Week 27 Harvest Update 🎉✂️ Harvest week is finally here — and what a run this has been 🙌🌱. Both plants were taken down right on schedule, with trichomes sitting in that sweet spot: mostly cloudy with just a touch of amber ❄️✨. The flush did exactly what it was supposed to do, and the fade coming into harvest was clean and natural. Red Hot Violet finished strong 💜🔥 — dense, well-stacked buds with rich coloration and heavy frost. Structure held up beautifully all the way through chop, a clear payoff from the long veg and training. Amaretto Sour was an absolute treat to harvest 😮‍💨🍋
Likes
16
Share
@AutoCrazy
Follow
Week 10 Week 3 of Flower This plant has exploded over the course of a week. She is starting to crowd out her tent mate a little at this point lol. I had to do another round of defoliating because the fan leaves on this plant get so big! I am pretty impressed with the stretch and vigorous growth this week. I can’t wait to see this lady start stacking on some bud. Cooler Internals: 600 ppm 1.2 EC 5.9-61 pH (it swings a bit over 3 days) 65 F Solution Temp. Onward 😎🍻
Likes
143
Share
@SwissKush
Follow
Day 64 - flowers are so nice! - 201 watts of light a. the buds are covered in frost, this week will begin the Ripen b. added 5L of fresh spring water, ppms 900ppm, she likes 800-1100 ppm c. PH in DWC has been yellow the entire grow with hints the slightest hints of green from time to time, 6.0-6.1. d. uploaded video of grow e. like Pineapple Express, this plant will harvest a bit earlier than most of mine. pistils are turning colors fast. f. trichomes are very milky, still some clear, no amber yet Day 65 a. replaced the 5L gone in the DWC with fresh spring water b. will gradually take PPMs down closer to the 700 range for the ripening phase, tamping down with spring water for a week c. DWC has plenty of nutrients in it. d. the buds are incredibly sticky. Day 66 a. doing very well, the smell is very inenst, my carbon filter is not powerful enough to filter the smell... good thing I like the smell b. 4L gone from the DWC overnight, added more spring water, ppms down to 840 to get ready for Ripen tomorrow at 800ppm, probably 10 days or so. c. the trichomes are very milky, but there are plenty of clears still present. The pistils are turning nice colors, and no new pistils are forming! Day 67 - Ripening Day 1 - only TA Final Part (GHE Ripen) 5ml/L a. Started TA Final Part (GHE Ripen) at PH 6.0, 800ppm, she is loving it, consumed 4L overnight of Ripen solution b. I will keep the Ripen between 700 and 900ppm for the next week or more. c. The trichomes are filling fast, no ambers yet.. The buds are noticeably swelling Day 68 - Ripening Day 2 a. she is consuming 5L a day of ripening solution b. the buds are becoming noticeably larger, thanks Ripen you always work well! c. adding spring water to the DWC to top up and keep ppms between 600-800. Day 69 - Ripening Day 3 a. 4.5L gone overnight from the DWC, will top up with Ripen solution to keep ppms 600-800 b. the resin is very sticky and smells amazing, rubbing a sugar leaf and the fingers stick together Day 70 - Ripening Day 4 a. 5L gone from the DWC, topped it up with 1/2 strength ripen, ppms 800 b. the smell has overtaken the internal carbon filter and is coming out into the grow room c. she will be finishing up next week
Likes
12
Share
Extrem starker Stretch, viele einzelne Äste die sich stärker nach oben kämpfen als andere.
Likes
Comments
Share
I most likely overfed the week before but didn't realize it. We'll carry on and live with it, but it'll get worse in the next weeks. One of the plants (top left in the video) has quite the strong smell now, while the others hardly smell at all.
Likes
148
Share
@BioBuds
Follow
Greetings my dear Jungletamers, So a major surprise came when @MarsHydroLED contacted us and asked if would like to try out their new SP 3000 light. Being a fan of Mars Hydro for years, we of course accepted their offer. We are totally in love with this light. I was when I saw it in another grower's setup and was in awe of its output and results. So with much pride and thankfulness for the presents the Universe bestowed on us, in the form of MarsHydroLEDS offer and the bountiful harvest of the last grow, (which I am thoroughly enjoying btw, such a great weed to have grown ourselves) we start out on a new adventure that we can't wait to share with you. With many lessons learned from the previous grow, a mighty producing strain in the form of Expert Seeds Gorilla Glue #4, a.k.a Expert Gorilla's and a tweaked super soil mixture, we are setting out to hopefully get over a gram per watt, preferably 1.5. The Setup A 4.5 (140 cm) x 2(70) x 6.2 (200) grow tent, giving me a .98 m2 workspace. This space is customized to my needs. A standing fan will provide airflow through the whole grow, a top fan will help guide cooler air past my lights onto the grow. 3 56 ltr pots will be the home for the plants when they are 2 weeks old, up to then in smaller jars. The Light The leading role and star of the show will be played by the Mars Hydro SP-3000, so kindly provided by MarsHydroLED, which we will test and review here and I might say, endorse. I'm very careful with who I endorse and support these days, but a company with that many wins in design, I'm talking ever since their first range came out in 2009 these guys have been raising the bar for the whole industry, I did not hesitate to support this leading brand. If you want to compete with these guys, you better bring some quality AND affordable pricing. Why do I endorse the SP-3000 without ANY hesitation? It is seriously THE BEST light on the market in this price range and size group. It has an enormously effective output in U/Mol and with 30% less energy waste comparing to older LED lights. Prove me wrong! And with a company holding a considerable market share selling thousands of units every month, competing on price and quality, one would think that customer service would suffer. Of course, also Mars Hydro is not perfect, but check the sheer amount of people that not only praise the light but also the service received, should the light somehow not perform up to par. It is this dedication to their customer base that made this company have a fanbase... Yes, a fanbase with a website and a wiki. So if you are looking to buy new lights, check out the END OF SUMMER OFFER at the Mars-Hydro Global Store on Aliexpress: https://marshydroled.aliexpress.com/ 👈 Check their offers but also their score, they ship from a warehouse near you so you don't have the extra import fees!! Cut out the middleman and have a deal on these lights!! At the moment I write this in August 2021, the lights are 408,20 euro when sent from Germany to the rest of Europe, that's 40 euro cheaper than the other Mars outlets, BUT EVEN 60 euros cheaper than ordering at a grow store!! The Strain: Experts Seeds - Expert Gorilla feminized regular. Don’t let the name fool you because Expert Gorilla is suitable for growers of any skill level. However, you do need to be an experienced smoker because Expert Gorilla is one of the most potent strains on the market. Lineage: Chem Sis x Chocolate Diesel x Sour Dubb Popularity: Extremely Popular Flavor/Aroma Profile: Chocolate, Earthy, Fuel Yield: 400 g/m2 Stress Tolerance: High resistance to disease Potency: 24% THC Flowering time: 58 - 63 days The Soil: Those who saw my Monstercropped Gelato #33 grow (you should see it if you didn't, I'm so proud of that grow), know about my super soil and organic nutrients/ permaculture tea combo that starred in my previous diary. Because of the great results, we are going to use the same recipe, adjusted some more with some new ingredients that will complete the mix and give an even more sustained super soil buffer. 20% Atami Bi-grow (very similar to ocean forest) 20% Atami worm castings 20% Atami Coco Coir 10% Hydrocorn 10% Peat powder 1 cup Fossil seaweed chalk 1 cup bonemeal 1 cup bloodmeal 1 cup Microlife 3-4 teaspoons of epsom salt 3 cups of activated biochar (activated with our own permaculture tea) I just made layers, starting with hydro corn on the bottom to aid airflow/run-off. On this I started layering the coco coir, Bi-grow, peat, castings, and amendments in a way that the more mature the plants get, the more phosphorous and less nitrogen they will find. Every time I made three layers, I would mix them by hand. This way we simulate natural soil, which consists of humic layers, composting plant waste, fungal and microbial life, and nutrients from fossilized sources. The Nutrients I will start with just adding 6.4 PH water, although this soil should buffer ph itself and regulate, after 4 weeks, I'll slowly be adding: - Biobizz Grow - Plagron Alga Grow - Biobizz CalMag - Biobizz Flower - Plagron Alga Flower - Biobizz Topmax - Melasses The Tea Some of you might remember the permaculture tea from my previous grow, I have a short video in my harvest page showing how we make it), it will star again in this grow. - (Rain)water - Comfrey (whole plants) - Dandelion leaves - Roots and leaves from the earlier grow - Minor periwinkle (Finca minor) is a plant we have in our garden, it contains an alkaloid that is associated with increased brain function but also is a light toxin for wee beasties and other unwanted guests like gnats (who hate it). - When flowering I add some wood ash to this mix Thank you for checking in on one of my grows again! Thanks for all the love on my previous grow, check it out if you haven't seen it!! Hug Bud
Likes
8
Share
Chopped on day 133 - trichomes look swollen and ready - leaves faded out. Cut this according to the biodynamic moon gardening calendar and the dates did seem to align with the plant aromatics being more noticeable. Very excited to do the smoke report on this one - focusing on 60% humidity @ 60 degrees for 21 days to retain terpenes and quality.
Processing
Likes
2
Share
Using a 50/50 mix of Purple Cow IndiCanja living soil and Fox Farms Ocean Forest, just ph'd water using lemon juice to bring down my tapwater and mammoth P microbes. I brew teas with Nature's living soil auto flower line. Seeds in the soil 4/17...I plant directly into the soil without presoaking or letting a taproot grow, I've had 100% success rate so far so I'll keep doing it I think
Processing
Likes
50
Share
@UKauto
Follow
Stretch seems to be over now. Starting to get a little bit frosty. Creeping along slowly but surely. Fed her plain water begining of the week and a little cal/mag. I'm away for new year so thought I'd upload upto today. Hopefully she packs a bit of weight on over the next few weeks Fingers crossed eh.
Processing
Likes
Comments
Share
Likes
3
Share
This week has been a mixed bag for my two plants. #1 is really taking off now, showing strong growth and picking up speed!🌱 It’s looking healthy and vigorous, which is great to see. Towards the end of the week, I also noticed the first signs of flowering—exciting! Unfortunately, #2 is still struggling.😩 It has barely grown and remains very small compared to #1. If it doesn’t start making progress soon, I might consider replacing it with another plant. I’ll give it a little more time, but let’s see how things develop in the next week. Fingers crossed!🤞
Processing
Likes
15
Share
Hola con esta semana ya quedamos al dia con el seguimiento ya que estaba atrasado en el tiempo. Se nota una producción de resina notable en esta genética que nos ha gustado mucho por su olor y estructura de las plantas . hemos creado un video por cada una de las 14 plantas del seguimiento, hay varias muy llamativas que están "pre-seleccionadas" para mantener a futuro, el olor que se llega a sentir es muy florar y dulce, si tienen alguna pregunta no duden en preguntar saludos. Hello with this week we are already up to date with the follow-up since I was late in time. There is a remarkable resin production in this genetics that we liked a lot for its smell and structure of plants. We have created a video for each of the 14 floors of the follow-up, there are several very striking that are "pre-selected" to keep in the future, the smell you get to feel is very flowery and sweet, if you have any questions do not hesitate to Ask greetings.
Processing
Likes
3
Share
Day 23th Flowering Stage, all plants looking healthy except for Gelato Sorbet. All plants 2L water + nutrients, Gelato Sorbet got 1L water + nutrients and 1L 6.3 pH filtered water.
Likes
4
Share
@KhaVigga
Follow
i went to work like 2-3 days not coming home and she is nearly dry out to dead but luckily i came back in time and fix it.
Likes
15
Share
@MrJones
Follow
Mr. Jones Fast Buds Moby Dick ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 🏡Indoor - 3"x4"x8" Custom Built Grow Closet 🌾This strain likes to stretch, so a heavy training regiment will be needed. 🗓️Germenation - Soaking in Water Strait into Amended Soil. ⚱️3-Gallon Pots 📊6.4 / 6.8 PH 💧 Feeding - Gaia Green Grow / Bloom 🕷️ IPM - We will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between products each month for Integrated Pest Management. 🌿╰⊰´🌿╰⊰´🌿 PLANT UPDATES 🌿╰⊰´🌿╰⊰´🌿 🗓️Monday - 11.06.23 Wen head and did a quick experiment, decided to HST 1 plant, topped in 3 spots as well as defoliated, Another plant did some defoliation and LST training, and left the 3rd one alone, let's see how things go! 🗓️Sunday - 11.05.23 These Ladies continue to blow up, I think I am going to top dress before the end of the week, I am going to look at the lagest plant that is doing the best, and maybe top it, defoliate, and maybe some LST, I tend to go easy when doing Autos but think this plant can take it. 🗓️Saturday - 11.03.23 These girls are just blowing up! they are at 5 inches and spreading out nicely, typicly FB Strains start flower in the 4th to 5th week, will be looking at some LST this week. ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 📝 Notes - Original Moby Dick Auto is a world-renowned Sativa-dominant giant created from two of the most popular strains ever, the White Widow and Haze cannabis strains which are known for the huge delicious aroma, huge size and yields; It’s an extremely easy-to-grow variety highly recommended for growers of all levels seeking for maximum yields with minimum effort as this strain grows up to 150cm and yields up to 650 g/m2 in 10 weeks without extra maintenance. Thanks to its 23% THC, this marvelous hybrid is all about happiness as it will melt your worries away while boosting your mood, leaving you with a big fat smile on your face and ready to get things done as soon as you take the first hit, making it an excellent choice for social scenarios and busy workdays. The Sativa effect comes hand-in-hand with a mix of lemony, piney, and woody terpenes that translate into that classic aroma every stoner loves. ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿 ╰⊰´🌿
Likes
17
Share
@VovaFarms
Follow
Strain is actually very easy to grow so i would recommend it even to begginers. Robust plant that did very well on topping, hst and lst training. Buds are thick and heavy. They release very pungent and piney smell with deep tones that reminds grape. After a week of drying i did some bud testing and i would describe the high as awesome physical stone with a bit of euphoria and happiness. Cant wait to cure the buds for a couple of weeks. Peace and be safe!
Likes
8
Share
Mystery Made 2 got harvested 16/11 and I'm planning to let her dry for 14-21 days before trimming and put them in glass+boveda (58%) and grove bags for final cure. Drying conditions are as follows: 16-18°C 55-60% RH
Likes
8
Share
@Oldwied
Follow
Day 10 of flower The first flowers are growing. Happiness grows very fast. The living soil works great. Big thanks to florganics!