07.09.23- 63 день жизни северного сияния в горшке 3 литра . Всего пару дней и будет харвест . Сейчас получает только чистую воду Веерные листья срезаны

Strong smelling bud purple tones thoughout the buds. Dense but could have been bigger had to turn watts down to 800 so limited the size. Good strain to grow easy did a few early techniques Lst topping etc update once dry and total Yeild 10xplants two lights 400x2hps

So we’re almost there with the soil plants! All the thrichromes are getting cloudy and hairs nice and orange! The frost on all four soil plants is insane and they smell amazing once you get in there and start waking them up doing maintenance etc it just overwhelms ya. In a good way haha! I gave them one strong feeding last night and will keep and eye on the trichs the next few days but will probably start flushing them. But I’ll let them decide. The dwc plant is huge it takes up the space fo two soil plants and will probably more than double the production. It is a week or so behind the soil plants and is really starting to stack the buds on this week. I’m having trouble with the root ball being so big. It’s good and bad. Having a few circulation issues etc but the water ph and ppm are staying consistent so I’m just going to ride it out till the end. I’ll update soon thanks for stopping by and as always. 🍻

This was a little sad week. Since I dont have a properly dehumidifier, the humidity raised and botrytis appeared... Added a directly wind (24h/7) on my plants and removed all bud with botrytis

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 We're now the last week, Buds continue maturation, they are fat and frosty 🌲❄️, look very yummy 😋😋, No water this week, One of my favorites of this grow and very resistant, she didn't be bored by the high temperature. Harvest tomorrow. 💡Mars Hydro - SP 3000 80% 54 cm. 🔥 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾💚🌲. Mars Hydro - SP 3000 💡💡 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light NUTRI NPK 💥🔥 https://www.nutrinpk.com/product/npk-mix-pak-for-4-to-5-plants-cannabis-fertilizer/ SweetSeeds - Sweet Mandarine Zkittlez XL Auto🌲🌲 https://sweetseeds.es/en/autoflowering-seeds/3233-sweet-mandarine-zkittlez-xl-auto.html

Another smooth week form how it looks should really remember to do this week to week but busy

Because of the wind some branches were broken. Fixed with bamboos .

41 grams from this pheno

Day 50 since seed touched soil. From now on all is in stable position. AK will always be in right corner from now. Biggest, fattest girl in all garden, takes a bit effort to bend even few top, stacked and fat ;) 5 liters went in, want good run off and saturation. Later today will install second level of scrog. Reposition all shoots, some are lost, i almost regret instaling scrog, lost control of even height a bit, but canopy is very dense, branches went fatter during that week, i am happy . Mars TSL2000 is on 80% will increase to 90% at the end of this week. Day 53. Second level of scrog almost eaten, will have to make third, plus heavy clearing awaits next week ... Day 54. Think tomorrow is watering day. Girls need good clearing, bottom canopy been canibalised heavily, lack off air shows a lot. Will do third level of scrog together with watering. Happy Growing !!!

Esta es mi primer planta que cosechó con éxito, y estoy muy feliz con mi resultado final 😄 obtuve una muy buena cantidad de flores premium con alrededor de 15% de thc (desde mi punto de vista claro 😅) Tuve algunos problemas durante el cultivo, principalmente que deje que se estirara mucho, debi hacerle LST a la punta principal para que no siguiera aumentando la altura y tener más flores del mismo tamaño, las flores más bajas quedaron chicas y les faltó madurar un poco, también tuve problemas de sobrefertilizacion aun a pesar de que seguí las instituciones de los fertilizantes y de sus indicaciones que me dieron los de servicio al cliente, incluso ya teniendo en cuenta eso siempre use la menos de la dosis de la base ya hasta que crecieron más le fui aumentando, igual creo que es muy cierto lo que dicen de que “menos es más” a la próxima empezaré usando muy pocos nutrientes, aparte creo que si hubiera usado unos leds más potentes, las plantas hubieran aprovechado más los nutrientes, pero igual me sirvió de experiencia, pienso cultivar de nuevo esta genética y sacarle más provecho. Muy recomendada 👌🏻😁

Plain RO water

Using the paper towel method, my girl's taproot starting showing after 24 hours. I also buffered my medium with Multi Total and Calmag, before flushing with pH 6 water to a low EC. Once the taproot was 3/4 inch long, I planted her into the coco and watered her with RO water at PH 6.2 for a few days. I also switched my light on (first at 20% power and 30 inches away from seedling, gradually up to 40% at 25 inches). Until the first leaves unfurled, I kept the light on for 24 hours. After the first cotyledons opened I switched my light to 18/6 at 60% power and have given her the first dose of nutes at EC 400. Think we can say germination was a success so on with week one! 🌱 💡

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Did a little more lst… let me know if im doing something wrong or could be doing better, i appreciate every single tip and opinion.

07-11 - Plants all looking healthy - good growth so far 08-11 - Plant nearest to the fan has bent over a fair bit - re-positioned away from the fan - bottom fan turned off - top fan still running 09-11 - Bent over plant is looking far better 10-11 - Watered with PH 6.02 water

Holaaa Hoy día 43 desde la germinación retomamos el seguimiento a estás señoritas. Altura Sweet gelato auto 81 CM Altura Cmxl1 62 CM Altura Cmxl2 60 CM Hoy se realiza riesgo de 1 Lt , la Sweet gelato ha demostrado más signos de mayor requerimiento de agua, por lo que aumentarle la frecuencia de riego para esta planta. Me sorprende que la Sweet gelato auto ha crecido lentamente, alcanzando una altura considerable de XL, y ahora que ha entrado en floracion, se siente ese gran aroma dulce. Comienza la cuenta regresiva para las Cream Mandarine, cada día se aprecian mayor tamaño de las flores . Día 45. Riego con 1 Lt por planta Día 47 Altura Sweet gelato auto 89 CM Altura Cmxl1 67 Altura Cmxl2 60 Dia 48 Riego 1Lt por planta Aportes, sugerencias, favor comentar.

Welcome to week 11💚 I am a bit confused because the Sundae Driver seems to be a hermie, but I will wait to see. Strawberry Gorilla has some CalMag deficiency, exit water has PH of 5.9 so thats slightly to low but nothing serious to worry about imo.

This week was a lot of fun, I never had a plant fade black on me, I knew lemon pie could have purple traits, but this plant is stunning now that it’s finishing. Far from what I expected in a really good way. Going to give her a few more days, because each day the fade just gets better and better. I can’t wait to try this out, should be ready to share harvest with you soon. One of those plants that’s hard to chop down in the end.

She doesn't still recovering... but doesn't look that bad, ph is around 5, and decided to stop feeding with nutrition for a few days, any tip will be appreciated

Special queen and special kush with one week into veg stage, ak-47 with 4 weeks so I started the lst, critical with 2 weeks