Day 22 - Didnt have a time to make a Day 20 due to my sickness but hey im back guys dont worry ! :) - So at the first point, changed the pH of the water with nutes to 6.3 for better CalMag absorbing - I know very well about light being too close problem, girls are bushy, not very stretchy. Will solve the problem in 5 days (will move them into bigger box) - Applied foliar spray with 1ml/l of CalMag and 1ml/l Rhizo - Deficiency is still spreading throughout the older leaves, i know im losing some leaf mass right now. Trying my best but i cant move the light (problem causer) further... - Going to transplant them to a 10l/2gal pots in 4 days after moving them to a bigger tent. - wishing them ladies all the luck i have to survive the next days without too much burn... Note: If you have some idea how could i dim the light a little, let me know ! :) Day 28 - So, moved them to a bigger box. I finally could. (120x120x200) - Calcium deficiency has spread almost to all plants in the small box but it looks like IT stopped after moving them And moving the Light further, finally... - Light Is now 50cm above the tops which IS appearing to be 17000 Lux (used Phone luxmeter so its probably not perfect) - every 2 days spraying them with 1ml/l calmag And 1ml/l rhizotonic before the nighttime - flushed every plant with 2l nute mix ph 6.0 EC 1.6 due to not buffered Coco coir (really pi**Ing me off). Hopes it made the nutes evenly spread - outflow came 5.8 pH and 1.4 EC - Fimmed at day 25, looks like they didnt noticed much but the lower branches started to grow heavily. (i know i shouldnt due to health of the plants but better than topping right) -wish them luck in next days, theyre not the biggest but they seem very strong (thanks to team Humboldt seeds :)) - if everything goes right from now on ill switch them to 12/12 at the end of week 6

Finalizamos estas mataro blue,con un olor bastante “inquietante” que se hace de notar,veremos que tal una vez secado y metido al bote. Aquí ya no hay nutrientes,ya que se hizo el lavado de raíces y como dije,posterior engorde por sequía.

Week six of flower, the 1/2 way point, I might have been a little heavy handed on the bloom nuites this week back to back heavy feedings has given me some burn edges on one of the plants. The pots are still heavy from this weeks feeding. I put them on drain trays to help dry them out a little faster as I do not want root rot or PM, They are starting to stack up and bulk up so Ime gonna just water this week and check the run off to see where the PPM is I bet its high, so I will chime in in a few days and tell you what's up. I have spoken.

Well the end of week 5 start of week 6 day 42 from seed I got some early signs of Pre Flower I want to say they are all girls ?!?!?! no hairs yet I'm hoping this week to see some, I took 3 clones also, one from each of the 3 remaining plants. once I get the high sign "no pun intended" hairs that is, I will start to chemically treat the best looking MILF. (Mother I'd Like to fertilize) I hope they are all girls like I said before this way I can get some genetic diversity instead of self pollinating the same MILF. On the observation side of things these plants have taken off in the last week they are all about even at 18" and the Fan leaf's are about 10'' across. The feeding seems to be spot on with no burn from the dry nuites mixed in to the coco. I gave just plain water today ON THE 25TH. I am feeling the Biologicals on this grow, The Mammoth P and the Enzymes are really doing a nice job of making the food available to the plants also the Fulife and Cargo Boost are really impressing me as well. This is why I love trying new things on my grows to help me become a more complete grower and really understanding the biology of the plant. It has been Hot these last few days in the 90's I think the C02 has been helping the plant deal with the high temps no sign of heat stress they are drinking a lot more lately respectively. that's it for this week hope the clones take and wish me luck on the MILF's. Stay safe all.

Week 4 Veg Report - TrolMaster Chronicles 🌱 What a week it’s been in the garden! We finally transplanted the Papaya Zoap into its final Autopot, and let me tell you, this plant is something special. Though her roots weren’t quite where I wanted them to be yet, the move was needed to help her catch up with the rest of the crew. She’s already looking fantastic in her new home, and I have no doubt she’s about to explode with growth in the coming days. Sometimes, you just have to trust the process, and I’m feeling like this is one of those moments. It’s almost as if the room itself is taking on a life of its own. 🌿 In fact, I’m starting to believe that what we’re building here is something greater than ourselves—there’s this energy in the room, a feeling of everything coming together perfectly. I can’t wait to see how this journey unfolds! Dialing in the VPD with TrolMaster’s Tech Now, let’s talk VPD (Vapor Pressure Deficit) and how I’ve been keeping everything in check with the Tend-X and the incredible (DSH-2U) Humidity Station. VPD is crucial to plant health—it’s all about finding that perfect balance between humidity and temperature to optimize transpiration and nutrient uptake. The (DSH-2U) Humidity Station, connected directly to my humidifier, has been an absolute game-changer in this regard. With its real-time data and automation, it allows me to monitor and adjust the RH with pinpoint accuracy. Simple yet brilliant, the (DSH-2U) Humidity Station is keeping my room at the sweet spot I need. Whether I’m tweaking the settings from my phone while I’m out and about or just fine-tuning things while relaxing at home, this machine does it all. It’s like having an extra pair of hands in the grow room—and when you’re managing something as complex as VPD, that’s invaluable! And yes, the TM+ Pro App—let’s not forget how awesome it is. I’m adjusting my grow room from the couch, the car, or even the bathroom 😜. I’ve said it before, but this app is making growing easier than ever. Feeding the Girls: The Perfect Blend 🌱 We’ve upped the game by adding CaMg-Boost at 0.25 ml/L to the feeding schedule. Along with the 1 ml/L of the all-in-one liquid, this brings the TDS up to 320 ppm, with a pH of 5.99 and solution temperature of 24.8°C. In the soil, readings are around 415 ppm, with temperatures hovering around 25°C The plants are absolutely thriving, and I can already see the difference this new feed is making. I can’t help but have a bit of fun with this process—it feels like I’m spoiling them with the best of the best. And they’re rewarding me with beautiful growth and vibrant green color. You know how it is, with the right care and attention, these plants are truly becoming a masterpiece in the making. 🌱 Shoutouts 💚 Big shoutout to TrolMaster and ThinkGrow LED for the phenomenal gear that’s making this grow smoother than ever. Also, massive thanks to Aptus Holland for their top-notch nutrition, and of course, to the community here on GrowDiaries—you guys keep the energy alive! 🌱 Last but definitely not least, shoutout to all the seed banks supporting this journey. You’ve been a huge part of this process, and I couldn’t do it without you! Remember, for exclusive behind-the-scenes content and updates in real time, head over to my Instagram and YouTube channels @DogDoctorOfficial. We’ve got tons of epic content lined up, and you won’t want to miss it! P.S. Let’s talk about the new Model One LED Bars—these beauties are not only powerful but super efficient. I’ve been able to dim them down, save on electricity costs, and still maintain an incredible PAR and spectrum. It’s all about fine-tuning the balance of power and performance, and these lights make it easy to get the best results while being eco-friendly. Whether you’re running them full throttle or dialing it back, you’re still getting optimal growth conditions for your plants. That’s the kind of innovation that takes your grow to the next level. 💡 Growers Love to all 🌿💚

Absolutely blown away by the new 2025 setup, prev ran 3 tents 😂, switched to AC Ifinity 2,4 x 1,2 single tent, 3 x 150 or 6“ fans. Fans all port outside, 2 exhaust with yet uncoupled carbon filters, 1 inlet with pollen filter. 6-7 air push fans (not all yet on 😂). SpiderFarmer 16L humidifier, inkbird RH control, inkbird heat control, heater, trotek dehumidifier (12L) with drain line and reservoir. Blumat system with RO fed 20L water butt, each pot with 3 long ceramic blumats. Data logger from SensorPush including WiFi hub and 4 sensors. One in cellar room (lung room), one above each plant canopy. Setup logger n sensors and track VPD. System running itself

Just plain water now there proper getting there fade on the self restraint I’ve had not to cut these down early 🤣

la semana empieza con la poda de hojas abanico. y termina con doblado de ramas. La nº1 que sacó tres ramas por nudo va por libre, le cuesta más crecer y tengo que ir podando y doblando a medida que va creciendo. La nº2 y la nº3 ambas terminan la semana listas para despegar.

✌️🎃 Thank you for checking my cultivation. 💚 Most beautiful every day.

Wanted to learn to super crop this grow so went ahead and did the 4 main stems. I was blown away by how quickly she recovered. Such an amazing plant and the end result looks awesome! Introduced nutrients to the autopot reservoir a week ago today. In a couple days I’ll put up a net and start spreading things out. Maybe 2 weeks to start 12/12.

Welcome to week 7! Almost time to flower and things are looking good. Since last week I did some light defoliation and cleaning up of the bottoms over a few days. I also lightly tied some of the branches out to allow a bit more light penetration but also to spread the canopy. This week (at the end of the week) the plants got one water containing a 2tsp of kelp, and 2 tsp of freeze dried coconut. The ladies also got one foliar spray with Mountain Organics sprouts, citrus and Rita oil combined with a small amount of Method 1pps (see picture in week 6). Temperature and humidity has really been steady thanks to the help of my Grow Ratio ESU and fans. Hoping I can keep this rate of growth into flower.  Strain: Moon Boots bred by Archive Seed Bank Tent: 2" X 4" @highdrogro Light: Scyence Dragon S Turbo 450 Watt LED Light Cycle: 18/6 Soil: Black Swallow Living Soil, KIS organic mix Air Circulation: AC Infinity Cloudline T6 Inline Duct Fan 7 Gallon Living Soil Bags: Grass Roots Fabric Pots

So this grow is slowly going to finish. Most of the trichromes have turned milky and the first signs of amber are starting to show. The ladies have been fattening up and the nuggets are looking pretty frosty. The girls are stinky and sweet. Switching to the automated watering has made a huge difference. The girls are starting to slow down on water uptake and the leaves are starting to fade. The ladies all look quite different with 2 very distinct pheno types showing. One pheno of a short plant with lots of orange hairs and very dense nuggets. The other pheno is very tall with more white hairs and fluffier bud structure. I will harvest these ladies within the next 2 weeks, depending on how the trichromes develop. I have been using Plagron Green Sensation to help bud development. Thanks again to the sponsors Zamnesia and Plagron. See you next week and happy growing.

Hello, long time, no grow. I’m trilled to start on a new grow project, i’m away from growing a long time, but my love for ot was always present, i miss it a lot so i have got a few strains from Fastbuds to test and come back with a minimal setup. I have got the Festberry, Bluedream, and the 1:20 cbd, they have sent in the Banana Purple punch Ok, so what is a minimal setup? For this grow i have choose to grow in my balcony, it is fairly big and i gave good sunlight, we are in summer now, so temps are high, swinging a lot. It is raining often as well so I did not need to water much. For the nutrients i will go organic i think, in my substrate i have about 30% warm castings, so i’m good for till mid grow length +-, i might add a bit of nutrients in 30 days mark. The objective of this experiment is to use as little as possible, 360 degrees. For the germination process i have used a mixed process method, that i have learned from Fastbuds and i have loved it, 24h in a glass of filtered water, paper towel for about 24h -48h and then the Floraflex gremination pellets, i have tested on the jiffy and worked fine as well. Cool about this method, if you are more on the anxious side or like to control more the process this is the way, you can follow the hole process and see the development in parts. I will add images later on, for this breakdown. Well that is it, lets hope for a cool, safe journey for this girls. — The Blue dream i had germinated two and both look great so I have decided to keep two in one vase. Never done it, so let’s see what will happen.

Among the most sought-after options are Grade A+ products, including shatter, hash, and more. Explore these premium offerings with https://t.me/cerianberigam a trusted supplier on Telegram, ensuring you have access to the best cannabis products available.

Welcome growers And also the tirth week of life is finished for this three ladyes, three phenos of SORBET#4 🌿🌿🌿🍧 I have decided to show you the all family, so , in this way we can see if they show some differences 😉 For now I have two pretty similar, with a large leafs and internodes very close to each one.. And another one a little different , more Sativa in aspect, with a large structure that increase the lights penetration, which means more growing for the lower branches 💯 Anyway.. In the begining of the week I transplanted into a 3l plastic pot.. Usually my choice of pot is the smartpot or the airpot 💯 And therefore, considering that the soil will obviously remain less aerated than usual, I have chosen to use a greater quantity of coco coir in the substrate I roughly prepared a mix of 50% light-mix (Canna professional and Biobizz), a 30% of coco coir (Atami), 10% worm-cast or humus (Atami) and around a 5% perlite wich it's already present in the light -mix.. I have also put a few micorizzae (Micosat F), like 10 grams, in direct contact with the roots and around 4 grams of Microlife (Bionova) in pellet form I will use this last one also for making an areated Tea, but during flowering.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. Root-Juice (Biobizz) and Rizostimo (Biomagno) for the last time, plus a little bit of silicium (Bionova) and then Activator (Biomagno) / Crescita (Biomagno) / The Missing Link (Bionova) / X-Cell (Bionova) {This last two i have used in a foliar spray solution} Simply a little bit of everything at any watering 💧 About the lights 💡 I currently using for the first time, two Mars-Hydro SP3000, running at 25% of the power for now.. Next week im going to increase at least to 50% ⬆️ Onestly this lights looks pretty solid, definetly intense, with a spectrum really close ro the sun light One of the cool things about it it's that you can connected each one toghter with a cable and so you can controll the intensity of the lights very easy, in a precis way 👌 We will see in this months how they works And that's all.. See you in week n°4 📆 Thanks a lot for stopping by 😎👍 FC ✌️ 🇮🇹

Watered today everything is looking good! All strains developing distinct scents now. Fat Banana has a Sprite like candy smell. The Blueberry Swirl has more of a lemon zest smell, was hoping for blueberry scent but hopefully it will come later. Tropical Cooler has the smell of a rotten fruit salad. Lemon Haze x Garypayton has more of a berry scent. Defoliated Blueberry Swirl, their were too many popcorn bud sites so I cut the branches off.

Third week in bloom. Everything is going well. My only concern is that I have defoliated too much and my humidity is too high. Difficult to get it down when it's just raining outside. I'll see what happens... 19.12.2023 I've made some space and flanged my old 60x60x120cm tent on the right site and switched on another PC fan. I hope I haven't made a serious mistake. All fans repositioned. And everything is taped off so that no light comes in. That was too crowded. Next time 4 or 5 will be enough for me.