To start I would like, give big thanks to Royal Queen Seeds ❤️❤️ and @James , ❤️❤️ to try their products one more time #RQSLOVER, also to @marshydrococo2 and Mars Hydro for the FC 3000 and the fan filter kit ❤️❤️ And another thanks for the GD community, for likes, comments, follows. This 2nd F1 strain run was great, Easy and beautiful, very similar with Epsilon 💚 Flower/herbal smeel 👨‍🌾🌲🌲 ⚖️ Wet yield 262g

Mehr Sonne bitte! Die anderen Bilder zeigen einen Steckling der Pflanze indoor.

FERMAKOR KOH Extraction – Update Last time I said the batch would be done in 3–4 days, but I made a last-moment change. I added fresh cannabis leaves, branches, and pistils to help buffer the extra KOH, fix the PK imbalance, and see if I can bring it into line without using citric acid. Reaction so far: greens are breaking down fast, adding nitrogen while soaking up some of the excess alkalinity. Smell: strong ammonia, but not rotten — typical of proteins and chlorophyll being stripped out. Texture: slurry has darkened, foam is down, liquid looks stable. Plan: let it sit a couple more days stirring, then check if it’s ready to use and use some citric acid in case the pH is still to high and "force" it ready.

Yooo gang updateee!!! Soo bad news first, the small tent with the godfather og mother had sadly passed away and expired, simple put she got way to close to the light AND turns out the air discs I was using were completely swalloed and wrapped up by the roots, so that mega blows. NOW the good news, I actually have a couple new plants in the large tent with the clones, a GDP that's about 4 weeks in on veg, and a NYC Sour Diesel which is about 2 weeks out from seed, will keep updating on what I do with those, other then that the clones from the godfather og are doing really really well will keep updating as the days and weeks go on thanks for stopping by gang!!!!

Another awesome week of veg and this lady's looking healthy

Buds are getting fatter by the day swapped the to front plants round and put the short bushy one onto a water drum to raise it to the same height of the other two so i could raise the light more

Every week I watch my girls grow into beautiful budding trees only difference is now she in flowering I take her outside to absorb some of the beautiful sunshine and she's loving every bit of it. I let her stay outside for 8 hours in nature then back inside for another 8 hours of led full spectrum and turn out my lights for another 8 hr she's an Auto so she loving every minute of this ...... this is the results ⬆️

Love this squaty lil thing she already sticky and shit love her structure she definitely gna be a heavy hitter

🍼Greenhouse Feeding BioGrow ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)

Picture 1 and second video: 20th and 21st November Plant is looking really healthy so far and can take a decent amount of Water and Nutrients. Also the first Pistols are showing up! pictures and video (3-5): 25th November Plant made a good stretch and reached a height of 145cm. Looking like a bonsai tree right now. Gave her 10l with a 2.3EC on the 24th and she is looking very healthy! I’m looking to thin her up a bit at thursday (day 21) to get some light penetration. I will also do some lollipopping to get this plant to its full potential. pictures and video (6-9) 28th November Gave her a really aggressive cut/lollipopping and deployed the scrog net… also did a little lst to get an even canopy. The plant was quite big before and I was a little scared that she will stretch too much…. But we will see 😜🤟🏻 See ya next week

Day 43-49 A lot of them are showing signs of going into bloom. Doing their stretch before bloom, so they need more nitrogen before they're done stretching. My own unbiased opinions about deep water culture.I love it.It's got the precision I need and control. If you like something more relaxed, living soil is your thing, but this is mine.I'm enjoying it.Everything's growing people have already done the research.I just gotta apply it.

The growth exploded last week, I just have no words on how beauty this is... On the other hand Im flipping officially tomorrow 🏾

Dec 23: Day 73 from seed. There is a lot to say about these girls, they have been a breeze from the start, 2 plants started producing pollen sacs early flower but I infer that was external, and they were eliminated. The flowers are beautiful and the product to description is very close. The smell is very close to freshly pressed rosin, very fruity and pungent; I see why this strain is a cup winner!

Starting off strong this week 💪😎 the left plant is looking so good and also the buds on the left plant are so nice and big 😋 the right plant is showing yellowing but that is fine because she will be turned into bubblehash anyways 😏 happy growing all!😎💚✌️

5 days to harvest

Week 2 of veg is in the books. Despite making some changes and dropping back to a 300w fixture, also upping the nute ratios - growth has been pretty decent for a single first week of veg. Got some yellowing on the leaves which is somewhat concerning. Again, hopefully rectified now that we’ve regulated to more acceptable temps and humidity. All are fairly uniform to start and the new bucket system has been issue free which is a bonus. Figure another week to the fim and then another week of veg before the flip. All on pace to get em to flower as quick as possible👌. We’ll cull as soon as able - if we pick up 3/4 spaces after losing the males that would greatly assist to free up some more space elsewhere and move in some new fems that have been backlogged recently. Finally back to focusing on quality buds and it’s and great feeling👍. Strain details She’s a mix of a particularly strong Northern Lights, crossed with a Spicy Bitch sativa hybrid. The hope is that we’ll be able to combine the overtly narcotic effects in the NL and mellow it out somewhat with the quality daytime sativa effects found in the SB. Both strains feature numerous grower qualities. Both parents possessed vigour and resiliency, the SB particularly colourful in late flower. These beans were the product of a shotgun breeding run that presented an unexpected opportunity so there’s quite a bit of testing that should flow from the various F1’s we’ve produced.

Candy mix

Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁

Day 99 Decided to harvest today. It's been a super interesting grow, first time I tried any form of hydro in a DIY grow bucket. The bucket did an amazing job! Stresskiller performed excellent as well! Was a very easy to grow strain. Didn't have any issues, only performed defoliations to try and get an even canopy, which worked out really great, I will probably never top autos anymore now, giving it less stress seems to be the way to get a longer veg period. It took 35 days for the first flower pistils to show up on the flowering nodes. My trichomes sadly never went more then 20% cloudy, but I think this has something to do with my setup, as my previous grow also had this issue. The plant is drying now in the dry tent, when it is done and trimmed I will do a final weigh in and update the journal with the total dry weight. I can't wait to try some, her smell is like sour and citrussy, very potent.