Starting to hit preflower! ✌️🏼

First signs of side branching so was able to begin LST on day 20. Plants where waters with dechlorinated water pH to approximately 6.3. The tangerine dream auto may have begun to shoot out pistols already 🙃

Hi meine lieben, 🤗 Die Sämling-Phase hat begonnen... In dieser Phase braucht es am meisten geduld, da der sämling noch recht empfindlich ist. Wie mein Ablauf in dieser Woche genau aussah, habe ich hier für uns Dokumentiert. Ich wünsche dir viel Spaß & Happy Growing 🌱🤗: ______________________________________________________________________________ Umgebungswerte der Woche: - Temperatur: 24°C - Luftfeuchtigkeit: 80% - 75% zum Ende der Woche - VDP (Room): 0,65 Tag 1: - Licht eingestellt: PPFD: 100 µmol - Lampen Entfernung auf 60cm - Lichtzyklus: 18/6 Tag 2: - Pflanzen Höhe gemessen: 5cm - Licht eingestellt: PPFD: 155 µmol Bewässert 👇(Nur Wasser): - Volumen: 65ml - PH-Wert: 6,0 - EC-Wert: 0,5 - Temperatur: 20°C Tag 3: - Nur beobachtet Tag 4: - Nur beobachtet Tag 5: - Licht gemessen (aktuell): PPFD: 165 µmol - Pflanzen Höhe gemessen: 9cm Tag 6: - Nur beobachtet Tag 7: - Licht gemessen (aktuell): PPFD: 175 µmol Bewässert 👇(Nur Wasser): - Volumen: 200ml (120ml hätten auch gereicht) - PH-Wert: 6,0 - EC-Wert: 0,5 - Temperatur: 21°C Run-Off gemessen 👇(Drain): - Volumen: 100ml - PH-Wert: 6,0 - EC-Wert: 2,25 - Temperatur: 21°C

previously, all my seedlings have almost stretched. this time i put the cm led lights 2 inches away from the seedling, and it seems to have induced self-fimming and divided into 5 or more branches. despite looking at many timelapse videos of germinating seedlings, i have not seen behavior similar to that of my little girl. besides that, it was a pretty uneventful week. i mixed and changed nutrients once testing the doser - still feeding at 1ec, pH 5.9. I had one leak, i think the hpa nozzle was shooting water from the side as i was not sitting correctly on the grommet - i must figure a way around this. i did not build the garden master controller yet with high-pressure sensors, hopefully soon.

The plant has grown a lot since last week and I'm starting to struggle with LST because of the numerous leaves that I don't find very important. So I want to do some research about defoliation which didn't interest me at first since it's high stress but I think it will be needed here.

CONTEST SWEET SEEDS GREEN POISON GROWER DAVIDE www.teknogrow.it Instagram @teknogrow

This week has been great ,today is day 78 and the girls are just doin their thang , 1 looks ready for flush already and the rest look about another longer then flush for them aswell,, can’t wait to see how these girls finish out over the next couple of weeks 😍!! Y’all keep them eyes peeled an stay tuned for next week! Peace love an positive vibes to y’all Cheers.💨💨💨

🍋🍌 Persian Pie - Green House Seed 🍌🍋 Today was a great day in the grow room! I did some transplanting and used a couple of new products that I'm really excited about. I used Extreme Mycorrhizae and mix it with clean soil for the first time. I'm confident that this addition to my routine is going to take my plants to the next level. In addition to the transplanting, I decided to trim back two of the upper fan leaves, to allow the lower shoots to start growing more vigorously. It's all about maximizing that growth potential! Hope all will go this way to the end 🙏 THX for watching and see you next week 👊

This strain is more sensitive to heat than others I've grown, but still looks fking beautiful!! Have tried a few buds after 6 days of drying and the high is sick. Will give a full review after fully drying and curing for atleast a few weeks. 🤟

Such a graceful girl... she is developing her flowers with such finesse! I defoliated a little every few days so I didn’t cause any stalls in the growth and shows to have worked! I really feel i am showing I know what I’m doing with feminized plants! It’s a great feeling to actually be so relaxed during too!

Ahoj všem 10 týden květu startuje ?😁No pořád je čas ten jantar tam ještě není 😁,ale choť ,už by byla😂

Day 13 of flowering : we are starting to see the pompoms appear 🏵️🏵️🏵️

Had some recent troubles. Overwatered once, then it dried out a little much. Also found out I got nutrient burn, so defoliated what I had to. Used half recommended dose and still had burn. Won’t be feeding for another week.

They’re getting going! The stretch is over (phew they tend to get long but remained shorter than the last two times) and they’re stacking nicely. Really looking forward to seeing how they continue to grow.

Entwickelt sich prächtig! +____+

Hello everyone week 5 of flower has passed for this Strawberry Gorilla auto 🍓 For the feeding schedule i stopped feeding Power Roots and Pure Zym and started feeding Green Sensation 0,5/l Spider Farmer SE7000 80% have a great day and wish you all happy growing 😎👨‍🌾🏻

- Day 22 Renewed all the water in the bucket today as we head into week 4 already. Gave everything a good cleanse with some hydrogen peroxide as well, got to keep those pathogens out! Seems like she's reacting well to me removing the 4 fan leaves yesterday as well. Day 23 Upped the PPFD to 400 today. pH was at 6.3 to got it back down to 5.8. Also seeing the first white pistils on the nodes of the stems now, so we're in pre flowering now! Day 24 The upper fan leaves had a big growth spurt the past 2 days and were completely covering the lower nodes, so I chopped them off, also removed the lowest nodes of fan leaves to redirect energy to the new growth. pH was up to 6.1 today, will wait till tomorrow to ph down again. Day 25 Yesterday I lowered the water a bit so that there is more space between the net pot and the surface of the water, I think I kept the gap a bit to small so the roots couldn't breathe enough, and today the leaves are finally a lot less droopy. I did also raise the light distance a bit but kept the same 400 PPFD. pH'd down to 5.8 again as well, even though it was still at 6.1 and added an 8ml of hydrogen peroxide dose. Day 26 Removed the new set of fan leaves again, they keep growing so fast Day 27 Stretch has definitely begun now. The side branches are starting to catch up with that main branch now as well. Trying to keep those lower nodes getting some direct light by trimming and tucking wherever possible.

AMAZING WEEK! The environment is reading for flowering. Lighting, feeding, watering, air temp and CO2 are all stable and should give my plants a stress free life. Humidity is still high, so I'll need to come up with a plan for dealing with that ASAP. I've introduced CO2 into the grow with my brand new AirBomz unit. It uses a light sensor that releases CO2 when the lights turn on, and then uses a timer to release every 2hrs until the light switch off. I doubt I'll reach the 1200PPM stated by the manufacturer, mainly because I'm running an extraction, but I figure some is better than none. Cool controller also included. After doing some reading I can see there's two things that I need to look out for: A) Switching off the extraction so it doesn't suck away the precious CO2 before the plants have had a chance to absorb it B) Making sure the room doesn't get too hot whilst the extraction is off, causing heat stress My solution is: A) Switch off extraction for 15mins at the AirBomz 2hr interval B) Use the Temp Controller the switch off the circulation fan when temp exceeds 27C C) Controller then switches on the active intake when temp exceeds 28C D) Temp is held at 29C whilst the extraction is off D) Extraction turns back on after 15 mins, temp drops below 27C E) Temp controller switches off active intake... F) ...And switches on the circulation fan G) Repeats every 2hrs NEXT WEEK: Work out how much the girls are drinking! I'll know when I change the reservoir.