420 Fastbuds Week 2 Veg FBT2301 The two of these are starting off great. The few rust spots stopped and stayed on the couple leafs it showed up on. I feed 500ml of solution every other day. I did start the General Hydroponics 3 part Flora series as well as the Calimagic. On week one I started 1/4tsp per gal ratio every other feed, so far no burn so will probably bump it up this coming week and see how they respond. All in all Happy Growing.

This week will arrive Bug Bud and Carboload by Advanced nutrients, let´s see how she responds :). Next week will rain a lot, so i will prepare myself and start giving her Botryprot by Prot Eco to prevent mold. Day 50 - She´s healthy. today is the first foliar day. I used 2,5ml/L of Botryprot. Overall she looks very happy, maybe needing some PK. She´s starting to have some fresh blueberry aroma. Fingers get sticky Day 52 - Feeding day. I added 1ml/L Alga Bloom making a total of 3ml/L. Sprayed her today again. Day 55 - Has been hot these days, feeding day today again. Today i added 1ml/L Bid Bud, 2ml/L Carboload and 1ml/L Alga Bloom. As she´s healthy i didn´t feel i needed to slowly introduce. Let´s see how she responds, but my experiments are going well :) I´m confident. Day 57 - Foliar spray today again. The storm will come in strong.

🍒 Lemon Cherry Gelato — Week 4 Update Autoflower · 12/12 from seed Quick recap (for anyone joining here) This Lemon Cherry Gelato has been grown 12/12 from seed, alongside photoperiod plants, under the same exact conditions. At this stage, we’re still observing how modern autoflower genetics can blur traditional lines — and once again, this plant is behaving more like a classic photoperiod in structure and rhythm. No rush. No force. Just observation. ⸻ 🌿 Plant Development She’s doing beautifully: • Currently at 6–7 nodes • Strong, even branching • Internodal spacing is balanced • Leaf color is a lush, healthy green • Structure is open and expressive No real training has been applied: • Only very light leaf bending here and there • No topping, no LST, no stress • The plant is shaping herself naturally — and doing a great job at it She looks calm, confident, and full of potential. ⸻ 🌡️ Environment Log — Week 4 (Shared Conditions) Same conditions as logged for all plants this week: • Temperature: ~25.7 °C • Relative Humidity: ~60% • CO₂: ~666 ppm • PPFD: 600–700 (adjusted naturally based on plant size and distance to light) • Nutrition & watering: unchanged, consistent, identical across the room This consistency is key — it allows us to clearly see genetic expression, not environmental noise. ⸻ 🧠 Observations & Notes What’s especially interesting here is how stable and photoperiod-like this autoflower appears: • No sudden flowering push yet • Vegetative structure continues to build • Growth rhythm matches the non-autoflowers closely At this point, labels matter less than behavior — and her behavior is excellent. ⸻ 🙏 Thank You A big thank-you to everyone following along, supporting, and appreciating the process. This diary is about learning together, observing without ego, and letting the plant speak. She’s shining — quietly, confidently, beautifully 💚 FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficialInstagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74 PS: A small heads-up — a few files didn’t make it into this update due to upload limits on Growdiaries (or simply her being a bit moody today 😄). We’ll try to upload the remaining photos next week. If possible, we’ll add them alongside the weekly update and clearly mark them as extra images. Plenty of photos are already live though, so we hope you enjoy the update as it is. Thank you for your understanding and support.

The girls start to grow rapidly, they are in good health, I thank the zambezaseeds for giving me the opportunity to cultivate these fantastic varieties

Lil defoliation lil lst

Whats is wrong with my plants? I don't know If you know please advise

12/20 Week 7 Happy with the growth and the smell is so sweet, minty, and berry so terps are doing just fine. Backed off nuets ever so slightly 12/21 new pics and backing off the nuets more tonight - 10ml each see if I can get rid of those white tips Helps if you upload the right files 😎 12/23 pics 12/24 All is good but think I am going to continue reducing the nuets and checking EC of runoff as still getting some small issues on leaf tips. Maybe I am chasing ghosts we will see 12/25 White tips under control, runoff checked at 1600ppm unadjusted 950ppm unadjusted in, adjusted for water thats 1400 and 750 so ok now. Buds building fast swapping positions in the tent tonight.

🌿 **Moby Dick Auto Grow Week 9 Update: Harvest Time Approaches!** 🌱 Greetings, fellow growers! It's time for an exhilarating update on the progress of our Moby Dick Auto adventure as we hit Week 9 of the grow cycle. With excitement mounting and buds maturing, let's delve into the latest developments: 🌟 **Abundant Bud Growth**: At Week 9, our Moby Dick Auto marvels are truly showcasing their potential, with buds swelling and resin production reaching its peak. The once-tiny flowers have evolved into dense, resinous clusters, promising a generous harvest in the near future. Trichomes are abundant, signaling optimal cannabinoid potency and aromatic richness. 📏 **Final Phase of Flowering**: As we enter the final phase of the flowering period, our focus is on maximizing bud development while ensuring ideal ripening conditions. By meticulously managing environmental variables such as temperature, humidity, and airflow, we're creating the perfect environment for our plants to flourish and achieve their utmost potential. 🍃 **Leaf Aging and Nutrient Management**: As anticipated in the late flowering stage, some leaves may exhibit signs of aging as the plant redirects its energy towards bud formation. This natural progression indicates that the plant is nearing maturity. Meanwhile, our nutrient regimen remains carefully calibrated, providing essential elements to support vigorous flowering without risking imbalances or deficiencies. 🔍 **Monitoring Trichome Ripeness**: With harvest drawing near, we're closely monitoring trichome development to determine the optimal time for harvest. Using magnification tools like jeweler's loupes or digital microscopes, we're scrutinizing trichomes for signs of ripeness, aiming for a blend of cloudy and amber trichomes to achieve the desired balance of cannabinoids, as well as flavor and aroma complexity. 🌞 **Preparation for Harvest**: As we gear up for harvest day, our checklist includes gathering essential tools such as trimming shears, drying racks, and storage containers, as well as ensuring a hygienic and organized workspace to preserve the integrity of our precious buds. We'll employ proper post-harvest techniques and curing methods to safeguard terpene profiles and enhance overall quality. In summary, Week 9 signifies a pivotal juncture in our Moby Dick Auto grow expedition, where patience and precision converge in anticipation of the impending harvest of our prized buds. Stay tuned for the forthcoming update as we rejoice in the culmination of months of dedicated cultivation, yielding a bounty of premium-grade cannabis ready for enjoyment and sharing. Happy growing! 🌿✨

Stanno entrambi avendo una crescita lenta, a causa dell'attacco delle cimici

Bericht folgt in Kürze 💚

🍰🌈🍬🍭

So I thought the plants was going to be a flop but they turned it around, really long time tho for a auto flower, I could of ran photos with a better yield, but never the less these look like 10/10 nugs and smell amazing i can't wait to see how these look dried off.

- Day 63 The flowers look beautiful right now, very frosty, very phat, branches can't properly support them anymore and the smell is amazing. Day 66 Noticed today that the pot was still pretty heavy after 24 hours, seems like she is drinking a lot less now. Hard to tell since when she started drinking less because I can't move her at this point, too risky with all the branches bending so far because the buds are so heavy and the stems can't stay up on their own. Day 67 Pot is still very heavy today so I'm gonna skip watering today. Day 68 Gave 3 liter light feed today, but noticed no run off now, while I was getting 1 liter run off when I was watering everyday, so might have to keep up the daily watering.

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

Evening fellow growers hope you all had a great weekend. Massive shout to James @RQS for supplying the beans for my current grow. ⚠️ I add photos as the week progress so please stop by and check out the progress. Day 29 the start of week 5, we have entered flower. Let’s hope for some stretch now. Really happy with how they are progressing. Still trying to figure out why the big one at the back is looking sad. She is growing at a rate of knots so I’m bamboozled to say the least! Watered last night will introduce some flower nutrients this week. Day 31, watered today upped the amount to 1 litre also started with some bloom. Will add some photos either day or tomorrow. ✌️ Day 32, nothing to report just letting them do their thing. 👊🏻 Day 35, not been a good couple days. The dodgy looking one at the back is no longer part of the crew. She tried and I gave her all the best help I could but she just stopped growing. The bud sites were like nothing I have ever seen before I really don’t know what happened. The other mimosa is doing fine. She is stretching and the bud sites are looking good. Watered last night with plain water. Will probs give her one more feed of grow then onto the bloom. ✌️ Once again thank you all for the love and likes on the current diary. ✌️

3rd week now about to setup filter and extractor fan also will be starting LST in a day or 2. Everything is going well so far for a first grow hope it stays that way. Also added the humidifier at the weekend which has upped the humidity 15-20%

Day 7in to flower heat is a little high hear But heyyyy ohh. Ph in 5.8 run off 5.9 Ec in. 2.4 run off 2.6 Both lights now on 100% Zeus side just starting to take over Lights off / heat problems but can’t be helped