Alle Pflanzen haben sehr gut auf das weitere Low Stress Training reagiert. Sie wachsen gesund und fühlen sich wohl.

officially flowering.. FINALLY

👉The daily routine of twice daily fertigation has given me a small insight as to what Phil Conners may have gone thru. There has been promising changes however that re-assure me that the plant is indeed maturing and will finish soon. The top leaves are starting to fade, and a couple of amber trichomes have been spotted! So far the amber color is light, almost yellow, and should darken up a bit by harvest time. At the rate they seem to be getting cloudy/milky I could be harvesting in as little as 3 days, but that is just wishful thinking I'm sure. I'm hoping no more than 10 more days. But I will let the plant decide...as long as there are only a few clears and the rest cloudy then I will harvest. 👉I took one small cola tip bud from an upper level, secondary branch. It weighed 30g with leaves, 10g trimmed and when dried to 20% should be 2g. I did this to be able to inspect the buds with a little more stability when using the USB scope. Those pix are the first 6 on this page. 👉Nutrient mix is the same recipe: week 11 on the General hydroponics flora series drain to waste chart. I reduced the concentration to 1ms from 1.3. The saturation level for the pot is averaging around 1lt per fertigation. I give it 2.5l at lights on, and 2L 1-2hrs before lights off. For some reason this grow session there is a persistent/prolific algea growth on the outside of the pot (cloth pot). I have the same fan setup Ive been using all year. It may be that when I didnt spray the pot off for a couple week the algea got a firm hold on the pot. I use a pressure sprayer with a H2O2 solution (1gallon water with 60ml h202) to spray off the exterior of the pot every couple days. THis keeps it at bay somewhat. After harvest I will cut open the cloth pot to see if the algea extends inside the pot any and if has affected the roots. 👉 While trichome hunting is very kewl if good pictures are taken, its very frustrating to get a decent pic due to any slight shake causes the pic to blur. When doing daily eye loop inspections I dont turn off the grow lights or fans. But when trying to get pix I turn off all the fans and both grow lights. This helps a little when trying to take pix with the USB scope.I have the small scope mounted on a tripod and that eliminate my own movement, but just trying to focus proves to be tedious because any touch causes the image to shake wildly, which results in very slow progress as I search around the plant and try for decent pix. Today I got a tube extension set for my 35mm DSLR. It turned my regular 55mm lens into a macro lens. While its not the same as a regular macro lense, its way cheaper....35$ for the tube set as opposed to 300$ for an actual macro lens. THe high resolution allows me to get sharp images with a deeper feild of focus than the scope. I still need lots of practice and need to work on lighting. I included some cropped and un-cropped macro shots done with the camera. The other macro shots are the USB scope. You can see its still got plenty of clear, lots of cloudy, and an amber here or there. The areas that I have touched have strands of resin that look almost like spider silk. SOOOOOO frosty! Santa is going to really enjoy his milk and cookies when he visits my house.

Pest issue solved, grow back on track. First signs of sex determined the left plant to be a male.I turned the male into a hemp fermentz

Another good week!! I need to LST and defoliate... probably going to do that tomorrow. I fed them this week as well as watered. I will add the flowering nutrients going forward!! Otherwise, I hope this grow continues to go well!! Cheers!!

What fun I'm having with these. Now the thrips have been eradicated from the flower room (for now) all girls have pushed really well. The sherberts are both very very similar phenos which is a bit disappointing I guess.. Flowers everywhere and already a great smell of sweetness from them. Npk feeds are still once a week with beneficial liquids and pH 6.0 water doing every other watering. Once a week they get 5ml per litre of big fruits. If you wanna know 👇🏼👇🏼👇🏼 fruiting is raised by up to 25% thanks to the higher auxin production in the bud's tips. As a result, the plant's capacity to absorb nutrients is higher. Higher nutritional needs lead to better fruiting with higher yields. Big Fruits gives the fruits an intense, natural flavor. The essential oils contained in Big Fruits have an immunizing effect and protect the plants from fungal disease and predators like mites. Big Fruits ties down excess lime in water and limits the risk of nutrient burns. By stimulating and supporting the microflora within the growing media, Big Fruits reduces the risk of heat shocks when temperatures peak above 35°C. Big Fruits also has a positive effect on the cell structure of plants which makes fruits more compact.. That's all for this week. Thanks for looking.👍🏼 Stay safe 😷😷 Grow well 🌿🌼🙏🏻

Cada vez más hermosas, unas más grandes que otras pero en general un cultivo bastante homogéneo que desde ya indica que dará unos frutos realmente espectaculares.

Has been working in the other end of the country for the last 2 weeks Then I come home to the girl! Really booming! Flower everywhere 😍 Just support her today with some bamboo sticks Really shitty weather windy as F

This was a great run overall. Nothing to complain about once she got into the pot and tent but herself. She flourished and did great with topping. Hoping she smokes real good. Lights now off. Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/

Organization was the word for the week. I organized the leaves on Daphni by cutting some old fan leaves and low level leaves. I organized my CO2 injection procedure. CO2 tank to REGULATOR thru SOLENOID connected to TIMER every two hours with lights on. I also organized the power strip in the back with cable ties and sleeves. Finally I had to organize my way out of a FUBAR situation when the oxigenating device in the RainForest 66 Reservoir stopped working. I will have some words to say to Katie in customer service for sure. I got a standard oxiginator and a disk shaped air stone and use that now to keep the water healthy. Daphni is staring to bud more on the lower nodes and the progress so far looks good. Knock on wood. Since i turn the exhaust fan off when CO2 is injected i dont really need the heater so I took it out. Have a great week.

This plant looks very nice after 4 weeks since planted, it's just a pleasure to see her developing at such a fast pace, really happy about her development so far, hope that this lady becomes beautiful fat bush! 💓💚💛 Stay tuned everybody!! This plant has been Transplanted on day 34 since planted

From 3 seeds all germinated and growed healthy until one night when electricity shot down and they got cold shock . This Is ONLY one what makes it.

If you are lonely when you are alone, then you are in bad company. Bee pollen is considered a “vitamin bomb” due to the presence of almost all vitamins with an average of 0.02–0.7% of its total content, with a higher amount of water-soluble than fat-soluble vitamins. Bee pollen contains vitamins A, D, E, B1, B2, B6, and C. It also provides minerals such as calcium, magnesium, phosphorus, potassium, zinc, copper, manganese, iron, and selenium, I mixed a bunch of that with some honey and RAW cane molasses to make a nice big bucket of tea. A family friend who is a beekeeper was kind enough to share some honey. The nutritional content of raw honey is impressive and includes high levels of protein, amino acids, B vitamins, calcium, manganese, potassium, magnesium, zinc, and iron, as well as various polyphenolic antioxidants. I am loading up nature's finest sugars, and sweet things, Honey & Mollases. UV-B-induced DNA damage (CPDs and 6–4 PPs) can be repaired efficiently by photolyases. Pyrimidine dimers can be repaired by nucleotide excision repair (NER), or bypassed by replicative polymerases (Britt 2004). The expression of the CPD photolyase (PHR) gene is induced by UV-B light dependent on UVR8 signaling pathway, and is also induced by blue and UV-A light (Li et al. 2015) https://link.springer.com/article/10.1007/s44154-022-00076-9?fromPaywallRec=true Old but gold. The camera picks up far more light than there is during the night cycle, camera is showing bright pink violet collages but my eyes barely see a thing, about 0.25ppfd in that tent overnight. Have been tweaking the spectrum of moonlight/intensity and watching the responses overnight. Tweak, tweak, tweak all week. PAR is 400-700nm, Overnight UVA in the tent is all 365nm and 385nm, so the meter only picks up a fraction of the light curve that makes it photosynthetically active past 400nm. Of the light in the tent, 0.25ppfd is from UVA Looks like It makes them 🕺 🕺 💃 all night. Better flower soon or ill be screwed for space, they are stretching, but is it "the stretch"? She has fire in her belly. Growing crops with insufficient light (i.e., below “optimal,” as defined here) limits the yield potential, which in turn wastes the other production inputs including labour, water, nutrients and electricity. As lighting fixture is one of the most expensive investment of the production, what is the relationship between light intensity and yield? Potter and Duncombe (2012) grew cannabis plants with varying canopy-level PPFDs during the flowering stage and found that increasing PPFD from 400 to 900 μmol·m−2·s−1 increased yield an average of 1.3 times higher, across seven cultivars, with no light intensity treatment effects on floral cannabinoid concentrations. Vanhove et al. (2011) found that cannabis yields were 1.3 to 3.1 times higher (depending on cultivar) when plants were grown under approximately 1000 μmol·m−2·s−1 compared to approximately 450 μmol·m−2·s−1 during the flowering stage.It was predicted that cannabis yield would exhibit a saturating response to increasing Light intensity, thereby signifying an optimum light intensity range for indoor cannabis production. However, a new research from Morrison (2021), after 81 days‘ experiment, found that When plants grew under LI ranging from 1200 to 1800 μmol·m–2·s–1 provided by light emitting diodes (LEDs), inflorescence yield increased linearly as LI increased up to 1800 μmol·m–2·s–1. "Cannabis will not stop flowering if the lights are turned on for a few minutes once or twice during the 2-month-long flowering cycle. If a light is turned on for 5 to 30 minutes—long enough to disrupt the dark period—on 3 to 5 con­secutive nights, plants will start to revert to vegetative growth." "Less than one half of one foot-candle of light (0.1ppfd) from sunlight will prevent cannabis from flow­ering. That is a little more light than is reflected by a full moon on a clear night. Well-bred indica-dominant plants will revert within three days. Sativa-dominant plants take four to five days to revert to vegetative growth. Once they start to revegetate, it can take from four to six ad­ditional weeks to induce flowering again!" Guess ill find out my answer soon.

5/16/2024 5/21 Wish there was more to report on these

Week 13 : This wraps up the last week of flush for the biotabs, they got 2.5 ml/L of humic acid each feed 3x 4 pints this week. These have a real funky smell to them, cant really put my finger on it, kinda plant musty, really strong smell, maybe skunky or something, main thing is they're getting the chop soon ! Clipped a fair few leaves but the idea is a dry trim and hanging the plants whole for 10-12 days of slow drying before the cure. Man i cant wait to wrap this grow up ! These kinda grew crowded, i can tell because the biotabs and mrB's have a few branches that are anemic, small, useless, so they're all gonna go into the bubble hash, let's see if i can extract anything from these beauties ! wish me luck 🚀

Northern lights is doing really good. I just topped her today I also removed the 1st node area. She is set to designate her growth to the 6 branches left. Everything is looking really good. Thank you Divine Seeds, Pro-Mix, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Oh my. Last week I was talking about N deficiency, but in reality she was perfect! The real big problem was my pH pen, that was broken, and when I thought I was giving a pH 6.5 solution to my plants, in reality the pH was a lot lower than that (maybe pH 4). That's why her leaves all started getting yellow! Runoff PPMs right now, after the feed, are 3100 lol. I decided not to flush her, but I'll give just water until that value decreases a little. Her flowers are bigger, and smell more and more, day after day, of fruit. I LOVE HER. But what a pity for those burned tips! I also have some updates on the clones. One of them created 1 single root, haha, but YAY, I'm so happy about it. That clone was fast! The other two are still there, but my fingers are crossed. There's a video of the clone after all the photos.