03MAY - woke up to a melted fan. Did a quick fix and hooked my intake fan to it, until I am able to replace that fan. Seems to be working for the time being. Updated pics to follow throughout the week. 04MAY - did a little bit of defoliation, think I did good, still debating on doing more, but I'll wait until she recovers from this one. 05MAY - Woke up late and didn't have time to check water this morning, so they are a little dehydrated, watered them, but other than that seem to be doing ok.

HUGE shoutout to Paul at New420GuySeeds for sending me these new 3 Run Homer test seeds to try out! I am extremely excited to see how this grow goes & to make it even more interesting there are currently no diary’s with this strain on GD! Everyone go check out their website & get some for yourself! I will be back tomorrow with day 1 pics when I get them planted! Keep watching & happy growing friends!✌️🏼🤙🏼🌱 Day 1 - Everything is going great all 3 seeds popped!👍🏼 Finally got them planted & watered with Fox Farm Big Bloom (6tsp per gallon) Day 2 - I can see all 3 seeds starting to come up we are off to a great start👍🏼✌️🏼 Gave them a little more water this morning with big bloom, grow babies grow! Day 3 - Everything is going great!🙏🏼 Day 4 - All 3 are growing strong👍🏼 Day 5 - PH water 6.4 Day 6 - end of week 1, everything is looking good✌️🏼🌱

RLF ist immer noch hoch. Lüftung läuft auf 100% und 1 Luftentfeuchter Stein liegt drin. Tipps wie man es senken kann?

So gonna stick with 1ml/l for the rest of the grow now, i think the problems were just too much in the soil and since lowering nutes the problems are slowing down. Another week or two for the Zkittlez, seeing amber on the sugar leaves but not quite on the buds yet although it is mostly cloudy. Lemon AK is behing as it was germed later but still looks to be forming some nice buds and now has a fantastic smell of its own. Looking forward to these so much cant wait!!!!

What happened in the box? The Icc is doing well and is now in bloom. I gave bio bloom 5g/l and increased cal/mag to 0.3 ml/l. The clones have already taken root went really fast 😊👌💚 Thank you for your time and let's grow 💚. ‐----------------------------------------------------------------- For seeds I recommend www.alchimiaweb.com. With the code 🌱LETSGROW 🌱 you get 10% discount on seeds also on reduced Seeds 5 on equipment and fertilizer 🌞

Flowering day 13 since time change to 12/12 Hey guys :-) The ladies are developing really well 😊. Was poured 2 times with 1.2 l each (groundwater see description at the bottom) It was started with the bloom fertilizer. Everything was made clean. Fresh osmosis water is applied and the plants are sprayed and checked. Stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : www.Zamnesia.com Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

What do you think about the vidéo ??

Harvest at day 69/107. Honestly, I'm a bit disappointed with the mainlining technique. Final yield is good overall, but the 8 colas got really different from each other, which is not supposed to happen in this method. There was 1 huge cola + 1 very big + 2 slightly smalled + 4 medium/small

End of week one of germination . Currently setting up veg tent and still tinkering with set up . Germinated in pre soaked rock wool cubes with rooting stims and a 1ml of m g b and then cover with a bit of light mix and just using cal mag water watered over the top when required , when they start to take off I’ll use a mix with rooting Stims Again to get theM working with the autopot system Pizza , luv & Techno ;)

They continue to grow. Some of the lower leaves are yellowing. We removed these shortly after this. Soon they will go into the one Gallon pots with 66% soil mixture and 33% Happy Frog.

6/28 Week 10 and she is looking fantastic Flush continues, nothing special just one gallon of h20 twice a day. Looking at at least 3 days as tricones still at less than 100% white (@80%) Deficiencies not bad yet, still building some bud 6/29 Looking well, just a bit of CA/MG def showing. Still building Some lights out pics to show off the buds and trics **** We have determined that best practice on coco DTW is to add a low dose of Cal-Mag once a week when in final container. This will satisfy the cation sites as the coco breaks down and avoid mystery CA deficiencies allowing the CocoTek to do its work. 6/30 Just some Bud Pics 7/2 HARVEST DAY TOMORROW!

BOOOOOOMMMM¡¡¡¡

purple punch is looking great and smells even better There are 2 purple punch plants in this grow and they are defenately producing different types of flowers they both smell the same tho but look completely different. one leaning more to the sativa and the other lookes indica all the way. im going to run them in ice water during the flush weeks to see if either one shows some purple just another three weeks or so then it will be harvest time i cant wait smoke some of each type to compare sisters from one another one is skinny and the other is big boned and both smell kick ass. having a hard time staying in the 70s its gotten quite warm the last fiew days and has reached 84 had to open the tent door to get it down to 78 when the lights are on hopefully it wont get any warmer before harvest time . in 3 more weeks

🎩🌈🍬 Pheno #4

Another week in the books 📚

Yellow climbed all the way up both plants. Been flushing for a while. Trichs seemed to be maturing very slow, since the sugar and fan leafs were already yellow and crispy. About to harvest even with only about 15% amber trichs. Should reach normal maturity while drying and curing. I'm going to give them a full 48 hours of darkness before the chop.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Just got done with trimming the 4x4 @greenhouseseedco Super Silver Haze / @blimburnseeds Silver Surfer Haze tent. The final yield is exactly 1000g plus some (kind of a lot)that I smoke in the last 2 weeks 😃 Also got 6, gallon size ziploc bags filled with good quality trim for concentrate. To be honest I was expecting a little more but keeping in mind that this grow I did not supplemented with bottled CO2 I think I’m good with the results. Definitely I enjoyed a lot this grow and I’ve learned even more.