After 4 days of heavy rain, the first mold appeared... So I spent about 18 hours searching for plants and picking out mold with tweezers After last year's experience with another seed bank, I expected the plants to be very affected by mold, but I have to say that Fast Buds genetics coped very well! Mold appear mainly on blisters to which the stem of the leaf leads water, which then collects between the stem and the blister I trimmed the plants more so that the air flows better and that water does not stick to them The plants look healthy and the flowers are gaining strength I really like the genetic stability of Gorilla Zkitllez, almost all the plants look exactly the same and are in the same flowering phase. Some plants are absolutely gigantic! if I didn't do LST, I guess the plants would be as big as me. however, what surprises me is that they are slower than Gorilla Strawberry, I think that some Gorilla Zkytllez will be after 12-13 weeks From the start Gorilla Zkytllez smelled strongly like diesel but now a very strong pleasant sweet smell exactly like Zkytllez candies I haven't seen my children for 3 days, it's raining extremely ... the last time I was chased out by swarms of ants in the early evening, I've never experienced this before, there were maybe a million of them and they sat on me and on the plants I'm finally going to visit them tomorrow, I expect I'll have a lot of work to do with mold and I hope the swarms of ants haven't harmed them in any way

So the last week has finally arrived. The girl is fully mature, she dazzles with colors and has a wonderful scent that I have never felt before and it is difficult for me to compare it. Tomorrow I'm starting to dry this beauty :)

ya se ven las flores, riego cada tres días , y corto las hojas que están caídas solo .último día de la semana 9 ya se aprecian las flores

11/10/21 new week for Captain future Single photos will be updated soon She bit slower then the rest but getting there topping has bin done and everything going great so far plants loving the new FC-4800 so as i 🤩 absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter. Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation.

Started the journey with a Mephisto's wedding, and Fantasmo express. Hoping the difference in heights is not too drastic. Plan is to press these plants once harvested. For now, they are little, but barring not having a diffuser for the photo e app, I trust that the environment is on the right track. Finally reaching a year of growing with this one so I'ma focus on the root zone. That's where I usually fall short, but not these. The Meph lab will create monsters after Halloween!

almost

Welcome to Veg Week 3 of Zamnesia Kalini Asia I'm excited to share my grow journey with you from my Zamnesia Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Kalini Asia : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Zamnesia • 💧 Humidity Range: 60 • ⏳ Flowering Time: 7-8weeks • Strain Info: 22%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 600W x 2 I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

24 Oct 2021 Week 16 began yesterday, but the first watering of the week was today. I’m keeping up with the flush, starting the 2nd week today. Hopefully I’ll be able to harvest in a few days. My Trio is looking really lovely. Their buds are covered in trichomes that glisten under the lights. They are starting to darken in color in some areas like their mother did. They may take on some pinkish/purple hues before it’s all done. Some of their leaves are turning purple as well. The sugar leaves are somewhat dark, but still green. All three of them are very nice to look at, and their smell is super strong! It’s really nice in my grow room! Yesterday I went out and got some more of those support sticks from the local home store and provided support for all of the branches that needed it. Which was a lot! I got 7 new support sticks and used them all. All of the branches are now supported and flourishing! Today each of my girls received a gallon of properly pH’ed water, and each had a sufficient amount of runoff from which to gather measurements. The process went as follows: C1 & C2 had an initial pH of 6.9, and C3’s initial pH was 6.8. I added .2ml of pH DOWN to each gallon which adjusted the pH to 6.4 for C1, and 6.3 for C2 and C3. TDS going in was 88 ppm for C1, 86 ppm for C2, and 84 ppm for C3. Runoff measurements were a little weird. The runoff pH for C1 was 5.9. The TDS was (at first) 600 ppm. I thought that was an incredible drop from the other day, so I did it again. It was 603 ppm the second time. Ok, moving along nicely! The runoff for C2 was pH - 5.8, and TDS was 1101 ppm. 😳 That’s a lot more than C1. C3 had a pH of 5.6, and TDS of 1212 ppm. Which is even more; so I measured a little more from C1 again, and the 3rd time it measured 736 ppm. 🤔 That seems weird to me, but I’ll keep an eye on it. If it continues to be that low then I will end up harvesting it before the others which won’t be so terrible. I’ll just have to wait and see. The temperature in the tent was 81F, and humidity was 47%. My ladies are looking lovely and growing better than I could have hoped for. This grow has been awesome, but I can’t wait to be done. Happy growing everyone! 27 Oct 2021 Feeding/flushing time again! I was somewhat perplexed the other day when I got the runoff reading for the TDS in C1. It was 500-600 ppm less than C2 & C3 respectively. Since I was having some issues with the TDS meter I thought that IT may be the cause. I made a note to check on it today, and there seems to be no problem with the TDS meter at all. Keep reading for details. My plants are still looking as lovely as I could ever have hoped for! C1 has started showing more color changes than the other 2, and the only thing I can say the difference is, is that I defoliated some of C1’s larger fan leaves last week, and wasn’t able to do the same for the other 2. That is the ONLY thing I can think of that has been different between all 3 plants this entire grow. Regardless, all 3 plants are looking wonderful! Today each of my lovely ladies received a gallon of property pH’ed water with an expected amount of runoff for testing. The preparation went as follows: C1 & C2 had an initial pH of 6.9, and C3 was at 7.0. I added 0.2ml’s of pH DOWN to each gallon which adjusted the pH of all 3 gallons to 6.3. TDS going in for C1 & C2 was 85 ppm, and C3 was 84 ppm. Runoff levels were different for all three plants. C2’s runoff pH was 5.7, and TDS was 1041 ppm. C3’s pH was 5.6, and TDS was 1059 ppm. Last time C1 was significantly lower than the others, and I thought that maybe it was a TDS meter issue. Evidently it wasn’t. C1’s TDS today was 526 ppm! 😳 still much lower than the others, and pretty much ready for harvest. The temperature in the tent was 81F, and humidity was 43%. Although harvest time is much closer, I don’t believe it will be done in time for this month’s grow diary of the month contest. So sad, but that’s life. Happy growing everyone! See you again soon. 29 Oct 2021 Today is the last day of week 16. I was planning on continuing the flush today, but remembered something that I had forgotten about…. I remembered the branch that had broken off of C1 back on October 10th in week 14. She had held on for well over a week in a can of water, but finally her leaves started to droop. I hung it up all by itself in my small tent to dry. Until today that is! I took it outside and trimmed it on my deck. Even outside, in a pleasant breeze, the amazing smell of this branch was easily detected. It’s kind of windy, rainy, and chilly here today, but still …. That sweet blueberry muffin smell was there. Her buds; still covered in the dried, crystallized trichomes were super sticky! I must admit that they are the stickiest buds I have grown to date. I weighed the dry bud to add to the grand total of C1’s harvest later. Then I ground it up and smoked it. All I am going to say is that from my reaction to smoking it; I have decided that no additional flushing is needed. After all, what I smoked today broke right before I started flushing, and I could taste nothing other than what I would hope to taste. So my fellow Growmies; I am ending this week right here. The next report you will see will be the harvest report!! Stay tuned!

Chopped on 4/27. Id have let her keep growing but the contest date ends soonn

Hermoso avance de mis chicas, han crecido y evolucionado de forma óptima, colores y aromas despampanantes, alimentadas en la semana controlando parámetros.

Meow! Week 4 is upon us! We adjusted her ties this week and removed a few of the larger top fans..her color is nice and uniform..her bud development looks closer to week 3 than 4 but she'll probably start plumping quick in the next week..we lost half of our flower lighting for most the week, we use a dual 315watt and one side of the ballast had a short..we remedied this and ordered another 315watt CMH..now that we have more light than we need, moving from a 4ft an 8ft flowering tent may be in our future... thank for reading and happy growing 🐱 7/12/21- light defoliation thru the center to base and removed some large fans from the top of the main stems

It's starting to get cold so i turn the other 120w led, 250w in total and hanged about 1.6 m away keep watching how they respond. As far for watering i only spray the soil when ever it gets dry with tap water. Update; They love the light and start to pray just a bit. At this point i give them 100 ml water every few hours. my humidity about 40% with the humidity dome on. One of them is stunned i keep her for now

Week 7 (06/03 - 12/03) During this week I will continue to feed the plants mainly with Bio-bloom and Top-max every two watering day; I will consider to use Bio-grow too according to the status of the plants. At the moment, the Fat Banana #1 is shorter than others about 15cm but more bushy, it's funny because during the first two weeks of their life she was the taller one. During the past week, the Blue cheese has grown a lot reaching the taller Fat Banana #2. At the beginning of this week they both are 65cm tall. I bought a pH tester so, starting from this week, I will also adjust the pH level in order to maintain it between 6.0 and 6.5... better late than never. 06/03 D43: watering day. Added 2ml of Bio-bloom and 1ml of Top-max to 3l of tap water. I've adjusted the pH with 1ml of Terra Aquatica pH- to obtain a pH of 6.4 07/03 D44: - 08/03 D45: watering day. One liter of tap water each (pH 6.4). Note: I usually fill the watering can the day before and store it into the tent to avoid to use cold water. Yesterday I tested the water and I found a pH level of 7.4. This morning I re-tested the water into the watering can before watering and I found a pH level of 8.0!!! I guess that, every watering day during which I only used tap water, the pH level has always been far high. Could it be due to an accumulation of "salt" into the watering can?!? 09/03 D46: - 10/03 D47: watering day. Added 1ml Bio-grow, 2ml Bio-bloom, 1ml Top-max and 1.5ml Terra Aquatica pH- to 3 liters of tap water. 11/03 D48: One liter of tap water each @ pH 6.0. I'm trying to lower the pH because I noticed that the Fat Banana #2 has two/three fan leaves yellowing from the bottom. 12/03 D49: added 3ml of Bio-bloom and 2ml of Top-max to 3 liters of tap water.

Eternity Grow Cup - Week 7 Veg Report Another week down, and what a week it has been! Our Runtz ladies are thriving, pushing forward in their vegetative stage with strength, beauty, and some seriously impressive root development. This week, we officially transplanted them into the Autopots, and let me tell you—the roots are stunning. Root Health & Mycorrhizal Magic The mycorrhizal fungi have been doing their thing, and it's truly a sight to see. When transplanting, I could clearly see how beautifully the roots had colonized the medium, forming a healthy, snow-white network that fully surrounded the pot. The Aptus Holland Mycormix is once again proving itself as an absolute game-changer in root development. Strong, well-established roots mean better nutrient uptake, stronger resistance to stress, and overall improved plant health. If you’re serious about growing, this is something you don’t want to overlook. Aesthetic Update – Pink Vibes! Yes, I know, I know—the pink background is still here, and I’m absolutely loving it! It’s giving the photos that extra pop, bringing out the vibrancy of the plants, and making every shot feel unique. Hope you all are enjoying these visuals as much as I am! New Home - TrolMaster Ecosystem This week also marked another major move—the plants officially transitioned into the TrolMaster Ecosystem. And guess what? They are absolutely loving it! With optimized climate control, precision automation, and a perfectly dialed-in environment, these plants are thriving under their new conditions. Current Environmental Conditions: Room Temperature: ~20°C Relative Humidity: ~67% CO2 Levels: ~1400 ppm Light Intensity (PPFD): ~300 A balanced combination of temperature, humidity, CO2, and light intensity ensures that the plants continue to grow at their full potential. The high CO2 levels combined with the moderate PPFD allow the plants to photosynthesize efficiently, maximizing growth while keeping stress minimal. Nutrient & Watering Program Right now, I’m sticking with the Aptus Holland Clean Program, which consists of: Regulator System Clean RO Water Conditioner All-in-One Liquid The water parameters are as follows: EC: 0.55 pH: 5.86 Water Temperature: 15°C (a bit cold, but still manageable) Ensuring clean, well-balanced water with optimal nutrient availability is essential for healthy root development and vigorous vegetative growth. With this setup, they are getting everything they need to flourish! Shoutouts & Thank Yous! Huge shoutout and thank you to all the amazing sponsors who help make this grow possible: Aptus Holland – Premium plant nutrition TrolMaster – Intelligent environmental control Cannakan – Precision germination & planting tools Grove Bags – Advanced curing & storage solutions Ziggi Papers – Innovation in rolling technology And of course, a massive thank you to Zamnesia, Plagron, and GrowDiaries for putting together this incredible Eternity Grow Cup! Final Thoughts Week 7 has been phenomenal—our girls are thriving, adapting beautifully to their new environment, and setting the stage for what’s to come. The next phase is going to be exciting, and I can’t wait to share every step of the journey with you all! A big thank you to the community—whether you’re watching, supporting, learning, or even just stopping by out of curiosity. Lovers or haters, you all have a place in my heart! Stay tuned for the next update and don’t forget to check out the exclusive content on Instagram and YouTube—let’s grow together! Until next week—happy growing, and good luck to all competitors! 🌱🔥 Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol MAster https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags Eternity Grow Cup episode 08 uploaded at 720P ,4K will came out on youtube

Endspurt

Looking strong for the 2nd week. Looking at repotting this baby this week.