2018-09-16. Day 1. This is day 15 from breaking the soil, she is doing good and is 13 cm high. I have topped her today. This is Seedsmans new 1:1 CBD powerpack with numbers never seen before. I will grow it organically in soil and use BioBizz nutrients. I have high hopes for this strain and i hope it will get me some fire medication. Description. If you are looking for a therapeutic strain that retains all of the traits of a classic Cheese variety, then look no further than CBD Cream and Cheese. With laboratory reports confirming CBD content of 18%, this brand new addition to our strain collection can be used in the treatment of a variety of ailments. While the classic cerebral high of its Cheese parent is not present in this strain, the relaxing body effect is very noticeable. This means that both recreational and medical users can enjoy the effects of CBD Cream and Cheese. In terms of aroma and flavor, you won’t be surprised to hear that this 1:1 CBD:THC strain retains that unmistakable Cheese taste in abundance! CBD Cream and Cheese takes around 9 weeks to flower and is suitable for all environments and grow media. Characteristics. Breeder/Brand. Seedsman Genetics. Seedsman CBD x UK Cheese Variety. Mostly Indica Flowering Type. Photoperiod Sex. Feminised THC Content. 22% CBD Content. 18% Yield. Indoors: 400 - 600 gr/m2; Outdoors: 800 gr/plant Plant Height up to 250 cm. Flowering Time. 60 - 65 days Medicinal Properties.Yes Taste / Flavour. Cheese Effect. Calming, Relaxing, Soothing

I finally broke a pound with a single autoflower! Couldn’t have done it without AGLEX cob led’s, Remo Nutrients, and coco coir. They’ve changed my game completely! This grow started off as a pretty standard grow. I did absolutely no training until the veg period was winding down, and pre-flower was beginning. As the SCROG net went in, a little later than planned, numb fingers due to cervical spinal issues, and a poorly time muscle spasm, I snapped the main stalk...disaster right? Apparently not! They’re tough plants! Within a day or so she was perked up and sending up new colas from all the growth nodes now exposed to the 2000w AGLEX cob led’s. These lights have transformed my grow process, and increased my yields by over 300% compared to my old led’s, and only draws 408w from the wall. 1.23g/w is quite satisfactory I didn’t have much tucking to do this grow after the original SCROG. Due to the fact I was a little late getting the SCROG net in place, she didn’t have too much stretch left in her, she certainly fattened up quite nicely though, almost too much so in places. The front left side of the SCROG net got awfully crowded with huge buds packed tightly together. Lesson learned...keep the branches spaced apart slightly further, and maybe allow slightly more vertical growth of the colas to allow slightly better light, and air flow penetration. My issue is I only have 6 foot ceilings in my tents. The ceiling in my grow room is only a little over 6’2”. I managed, through SCROG techniques, without topping or fimming, to keep the top of my canopy 24” from the floor. This allows plenty of space above for the AGLEX cob, and exhaust fan. After last feeding I flushed with just Ph’ed water for 5 days, then gave the plant 48 hours of darkness, to rid itself of chlorophyll before harvesting on November 4th and hanging in a drying rack. It’s still curing in jars but after trying a few samples, it’s an awesome strain, and hits hard. It’s not as hard as it sounds to fill a 4x4 tent with a single autoflower, and still pull 18 ounces (504g) out of that tent. With simple SCROG technique, defoliation, quality grow medium you can achieve the same results. Of course you’ll need an AGLEX 2000w cob, but for an 18 ounce return on a $300CAD light, in 3 months, it’s a no brainer folks! You won’t find a better light under $300 Canadian. You’ll also need a quality nutrient line, and it’s hard to go wrong with the Remo Supercharged Kit. The proof of those 2 products quality are in my harvest. I hope this has helped improve your own grows somehow :) Head over to YouTube and visit my channel, just search for Scrog Freak, or click the link below. Drop a like and subscribe, more videos and logs to come! Recently entered a Gelato OG Grow Off and will be posting updates and instructional videos there. Check it out! Thanks and good growing! ScrogFreak https://www.youtube.com/channel/UCDFY6EjqIMqv2peq1d1eM1Q

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 111821 😽💨Things are going pretty good considering our terrible luck with all things autoflower lol..I think we stopped the calcium deficiency from spreading..these little plants are drinking a ton, 3 gallons every 3rd day..using autos to dial in a tent was pretty hairbrained but things are going pretty good..the MarsHydro fixture is itching to get some photoperiods under it..I honestly can't wait!! Thanks for stopping by grow fam and happy harvests!!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

This week was awesome! Great weather + little support from Royal Queen Seeds! The sunshine which the plants got this week was amazing. 3 days without any clouds only blue sky and sun... Lovely! The ladies enjoyed the great weather and showed some really good growth this week! 💚☀️ I let the new seeds which I hot from RQS germinate right now... The majority of them already showing the first root poking out. I had found also a new side where I'm going to plant some ladies too ... So stay tuned what's coming next week! Keep Growing everyone! 💚💚🌱

Sorry I have not updated in some time. A lot of the missed time was me recovering from hand surgery. In this time, I was not able to move plant and tend to them. Then, at the start of the new year, GD was acting horrible. It would allow some updates and then reject others. Luckily it was still allowing harvest updates. The flower has a strawberry berry smell. Strawberry flower is my favorite. It is super frosty, and smells delicious. I did lose half of the canopy during flowering. As it was too close to the fan. Causing it to l wind burned a lot and ate away at the plant as it grew. She did alright for what I could do 1 handed. Thank you Spider Farmer, Athena, and Herbies Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Day 77,flower day 47

Welcome to my CBDV diary. Has been blast.. there's so much more to growing a CBD plant, my point is I'm far from where I want to be with the Quality of the end product as far as density goes. (I got the quality part down) she's 1 stinky sticky ass bitch. Wk 9 Day 58-63 Plant was kept on feed till the bitter end. She was confided to the 70cm2 for her last few weeks of life but I've no doubt, if I had of kept her going under the FC 3000 she would of reached deeper down and gave me denser buds on top. There is so much airy ripe bud below I'd say it'll make up for 1/3 of the overall harvest. Which will be quite a lot. Id say in the 80-100g no doubt. She has some major big buds that are stacked with swollen calyexs that are glistening and very sticky. I can she's had enough. I didn't have the light to finish the end that the FC 3000 created on a lot of my autos. On most I clipped it away after I had to confine my plants to their own tents for good. But, she kept eating. Wk10 63-67 I stopped everything nutrient wise. And let her finish the ride out on water until day 67 and she gladly ate what was in her pot and showed no signs of wanting more, so I hard flushed her 1x pot value (11L) and got a ppm of 900ish, so 2x (22ish) more the pot value until it came down to 210. And for 3 more days I left them girls drink what they could from the pot and left them under my 100w where they've lived the past 3-4 weeks and I'm gonna pull them this week, they are resting 30hrs already and then I'll pull them, and harvest them whole, roots and all will be pult and I'll shake the clay off, bag the roots and hang dry upside down, (so no dirt falls on the buds while drying from the roots) and will dry at 55-60 rh with a temperature of 17-19c. I'll try keep the RH around 59 but I'm not gonna worry too much if it differs from that range. I already cut a wee bud off her the today, just a small 1 to try her for taste. And I'll rate it on harvest. As she's low on CBD, I'll rate her on taste. But, she'll be a nice addition to my full THC smoke no doubt. Never really removed any substantial growth from her to even call it a defoliation, there really was no need. I done a decent job at LST and my plants got rotated every day and I pult nodes/leafs this way and that. So, I'm happy with the results. She has a lot of girt and not too much lollipoped with a good amount of CBDV bud in 70 days. Very nice indeed.. Thanks so much for looking at my diary guys. I hope to do better the next time. But, as I am using dry additive powders I'm sure I'll be able to dial in that key nutrient ratio for my CBDS. She's been my biggest auto of this grow. At 71cm tall, and a big ass cola I am very happy. She has a lot of girt and stinks fruits, mainly passion, I'm guessing. As I've learnt, you don't know the true smell of your weed until you get at least a 2 month cure on it. Harvest Day.. Day 70 was done on day 65 then I left as I like my weed little on the harsher side. She very punchy. Has like a deep wood smell but very citruses with hints of tropical fruits. I've harvested 6 autos today. And, its hard to pick up the smell. Very sweet smelling and citrus fruits. (Ill give a more independent smell profile upon the trim and hopefully she'll come into her true smell upon a 2 month cure. As all my bud is given) To my sponsors from kannabia thanks so much for allowing me to try this plant. I've loved growing it. Hopefully I'll do it more justice on my next round of growing it. And, to my sponsor from marshydro, she's a rock star. Thanks very much for all your help. COUPON FOR MARSHYDRO Use code "ggs" at any official marshydro site for a discount. FC 3000 & MARSHYDRO LIGHTS The FC 3000 300w it has a high ppfd 1525 umol/s, 2.85 efficacy and has the new UV addition which brings it closer to the (RA) spectrum, that's the Sun spectrum. The FC-FC-E has this, Also it has a much even PPFD making for a more evenly grown canopy and has a deep penetrative light as it allows you to move the light closer to your canopy with a reduced risk of light stress. The TS versions are a great light to. These are different though. As they have a much higher ppfd in the middle, so I suggest you rotate them plants and move em about to get the best out of the high PPFD And to the community. Much respect for anyone that can grow their own bit of chronic. Fair play to you. Enjoy your harvests and thanks for tuning in. Be sure to drop a like or comment so I can visit your diaries. Either way, thanks for dropping by.

Things start to fatten up, lots of thc really a big win there. Bummed for te height of 2 girls but they are doing well.

Welcome to Day 36 .... first Day of pre flowering 😍🙏👍

Defoliating weekly

Germination date 🌱 29/11/2021 Day 70 09/02/2022 Strain 🍁 SinCity seeds Frosted Biscotti (Biscotti Sundae x Whitenightmare) THC% • Unknown 💡 Mars Hydro FC-E6500 • Power draw 650W + 5% • Max coverage 5 x 5 • LED 3978 pcs high quality chips • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver & Light bars • Daisy chain • Fast cool system https://marshydroled.co.uk/ 🇬🇧 PROMO CODE • (organicnature420) DISCOUNT https://www.mars-hydro.com/ 🇺🇲 PROMO CODE • (ORG420) DISCOUNT 👍🏻 ⛺ Mars Hydro 150 x 150 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients Living soil (dry amendments) Grow Bloom Bloom2 MycoBoost Barley 🌱 Growing Media • Soil Notes 📝 Not as good as some of the others but no complaints. Lights working wonders and now upto %85. I will leave it there and go full power next run as I've had no problems 💚🌱 Discount codes in bio for Mars hydro

I'm wanting to replace all my miscellaneous lights with another quantum bar rig before my Fall grow this year. Anybody want to buy some gently used lighting gear this summer???😁😎 👉 2 x 100w Cree CXB3590 (3500k) with pin heatsinks - 3 grows usage 👉 1 x 100w Citizen Clu048 COB (3500k) with pin heatsink - 3 grows usage 👉 1 x 120w DIY quantum board (3000k) 256 x LM301b's - no heatsink - used for 2 grows 👉 1 x 60w Bridgelux COB (3500k) - Par38 style - used for 1 day (a back-up bulb) 👉 1 x Morsen 2000w (367w actual) blurple with a bank of 1/6 of the 200 LEDs not working - used 3 grows 👉 1 x Morsen 2000w (367w actual) blurple with only my current grow in use (the replacement) 👉 1 x HeroLight 1500w (285w actual) 5 x COB full spectrum (pinkish-white) - 2 veg stage uses 👉 4 x 36w Par38 type deep red (660nm) bulbs - 3 grows usage 👉 2 x 25w 225 LED panels (660nm) - 3 grows usage 👉 2 x 25w 225 LED panels (440nm) 4 veg stage uses 👉 2 x 25w 225 LED panels (440nm) 👉 1 x 50w 225 LED panel (6500k+440nm) 👉 1 x 20w Par38 style Cree COB (3000k) - (more like a 40w) - used for a week 👉 1 x 15w Sansi blurple Par38 type bulb - used 1 day only 👉 1 x 40w Sansi 4000k daylight Par38 type bulb - used during germination only 👉 4 x 12w MiracleLED red spectrum (4000k daylight + 700nm red) regular light bulb - used during flowering in 2 grows Just hit me up in chat if you are interested in anything- ============================================ SUNDAY 3/31: I foliar fed her a few times and rotated her. Almost have the lighting timers adjusted well enough to keep the PAR high while keeping temperatures low enough for successful flowering. MONDAY: spun her around and foliar fed a few times TUESDAY: I fed her about 3/4 gallon and started her on Open Sesame and Tiger Bloom. Foliar fed a few times and tweaked the timers again.. WEDNESDAY: I foliar fed a few times and rotated her, then took some photos. She's looking sexy!😍 THURSDAY: I foliar fed her a few times and rotated her. FRIDAY: I watered her with about a half-gallon including boomerang, bud candy, calimagic, terpinator, kelp me kelp you, and armor si. She's the most Sativa-looking plant in either of my tents, but still currently winning the race to the finish.

Vamos familia, actualizamos la tercera semana de floración de estas NoName de Seedstockers. La temperatura que estuvo entre los 24-26 grados y humedad dentro de los rangos correctos. En cuanto a las plantas las veo verde sano, estiraron bien y ensancharon bastante también. Las flores empezaron a formarse, por el momento todo correcto, os dejé también alguna novedad y un cambio en la sala, agradecer al equipo de seedstockers por hacerme llegar las novedades y a Mars hydro por el nuevo TSW2000. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

Much more leaves appear on her body compared to the last week. All the leaves look green, healthy, and much larger. My only concern is that her stem does not get any thicker or longer these days. I try to feed some nutrients with their density far smaller than what is written on the instruction paper. Now I attach a small camera on my pot and record her growth. Her leaves look full of energy from morning to evening, whereas they look losing strength at night. It could be nature, according to my cannabis-grower friend, so I try to prevent from interfering too much. It would be problematic, however, if it has a correlation with her thin and short stem. I would like your comment on this. Your support will enlighten me, as the LED does onto the plant. "Light, my light, the world-filling light, the eye-kissing light, heart-sweetening light!" In the city of New Leningrad, 2021-02-01. I append an mp4 video to the diary. 2021-02-02.

Start week 6! Looking nice and starting to fatten out! Can’t wait for harvest time! PATIENCE! Very happy so far with how they are all doing!

10 weeks from seed to harvest. The nutrient line I was using didn’t give me optimal growth, for this strain and my level of experience. Had some great growth and veg time, about 4 weeks, but when flower kicked in they got beastly. I would say I had two different phenos of this strain, and the one pheno that is unique, had slightly looser buds than the other two. This could be because of the LST/super cropping of the main cola. The other two had nice rock hard frosty buds and have similar smells and profile. The other one has more citrus, and was a bit lanky, more sativa in looks. Overall, easy enough to grow, no major surprises, and decent enough yield for 10 weeks. This is a strain that could have been better had I not had some issues with either lockout/deficiencies.

So she got the chop 2 weeks prior to what I wanted, but I did not lollipop enough doing this Scrog and suffered high humidity, lack of airflow and as a result lost 4 tops... Out of 16 big ones. But I have harvest, wet trimmed and left to hang dry in a room on clothes drier. Room circulation fan on low, and temp is 22c with 51% humidity. Aiming for a 10day dry it maybe sooner. Then we will smoke test and cure then re test 🙌💚 Thank you all for following along this LONG and heartbreaking breaking Journey