Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
@DE_BW
Follow
This strain was an absolute pleasure to grow. I’ll update in a week
Likes
Comments
Share
16" wide by 9" high, leaves doubled from week 4. Vigorous growth using bloom 0.50ml / 1L, keeping soil (pro-mix HP) moist daily
Likes
34
Share
Original Auto Amnesia Haze - She is very bushy and growing very well. One more week till flowering so the next watering will be with bloom nutrients :-)
Likes
6
Share
@Spazmagi
Follow
12/1 - Well, here we are. December 1st, start of week 9. She is absolutely loaded with buds and I just can't wait to see how they swell and ripen over the coming weeks. I switched over from Early-Bloom to Mid-Bloom nutes (DynaGro Week 5 Flower, Recirculating). This is the first week with Grow (FoliagePro) cut out completely. I still fed her at a 75% concentration of Bloom and of MagPro, but full strength of DynaZyme, ProTekt, and Hydroguard (At the amounts notated). This gives her a ppm right at 1000 (2.0ec), though she will likely go +/- 50-100ppm. This week the plan is to top off with pH'd water instead of topping off with nutes due to the higher EC, though target is to keep her between 800-1000ppm (1.6-2.0ec). 12/5 - Uploaded video from 12/4 Thanks again for stopping by the garden, and, as always, Happy Growing!
Likes
1
Share
End of week 3, last week we removed bottom node and this week removed last node from bottom tpp, heavy lollipoping for pre veg for 2/3 weeks then flip to 12/12
Likes
1
Share
Best bud I’ve grown to date hands down. Creamy cake terps + A heavy high!!
Likes
5
Share
@RastaRick
Follow
Tok off large fan leaves on day 24. Seeing preflower starting. Decided to try out a natural shape instead of doing LST. I hope this doesn't backfire... The blackberry gum on the right is getting big. I like how autopotamus has natural shape... But he also has much more light haha
Processing
Likes
5
Share
@ertaverd
Follow
On June 9 I decided finally to transplant her to the last pot of 30l. She deserved it a few days ago, but i wanted to extend the time on the other pot because i can put it on the roof to catch more sun hours. On June 11 I made a hard defoliation and i will let her recover for maybe a month to see if she get the shape that i want.
Processing
Likes
71
Share
Week 4 - 01/22 to 01/28 2021 Pictures from Days 25 + 26 TRANSPLANTED! 1.) I think the Purple Lemonade might have flipped into preflower already like the other Red Poison and Dark Devil 2.) Think the Purple Lemonade has Tobacco Mosaic Disease? No worries for me dur only thing I can see with the streaking/twisted new growth but the Purple Lemonade is doing fine otherwise 😈 More and more reasons to go back to a photoperiod grow after this for more control/really test out the new lights 🙌 Ended up more 50/50 ratio of Destiny Organic's Dark Matter Living Soil + ProMixHP since I had to make the Destiny last. Apparently they went out of business just after I decided it was my favourite/new soil :( Would rather stay away from Ocean Floor since I haven't had the best experiences with it (bugs/rust fungus etc) Feel free to drop some recommendations other than Fox Farms below 👍 Moved the Purple over to it's final 5gal on Jan 26 and started light LST + watering from the bottom of the tray to coax the roots down as opposed to a top pour. Still giving them hourly sprays of basic water foliar and the light water/hydrogen peroxide spray mixed in here and there for piece of mind/extra cleaning from the soil contact during transplant. Looks like bits of purple/red flecks are starting to creep in to the stems so hopefully keeping my window open at night to drop the temperatures will pull some great colours in my tent for the first time 😻👹😈 I raised the @ViparSpectraLED P1500 another eight inches after transplant and started basic LST. I really wanted to get these four under a ScrOG but if 3/4 are already flipping and the LSD is still runty I might have to wait it out again. I have the @MarsHydroLED TSL2000 set up and ready to go once the girls settle into their new pots. Have the new surge protector/heavy duty power cords/power tool grade timers as mentioned in Week 3. Some of it shown in the pictures. Threw some videos in this week as well with some Queen's Radio GaGa, Beastie Boys' Brass Monkey, and a little hint of Arkells ....COME TO LIGHT on the short @ViparSpectraLED ..GET IT.. 😓 -- Thanks for checking in! Throw down a like and/or follow so I can return the favour 🙌 Check out my Diary of the Year 2020 Entry for my Original Auto Sour Diesel: https://growdiaries.com/diaries/54258-fastbuds-original-auto-sour-diesel-grow-journal-by-glazedgrow IG: @GlazedGrow CannaBuzz: @GlazedGrow
Likes
66
Share
@DevilsBud
Follow
New week for the Chocobang 🎶🎶Look at chocolate salted buds stick in your bong and smoke it 🎶🎶 I think the Chocobang needs couple days more then the rest but it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
21
Share
Well during the last two weeks I discarded most of the plants I was growing due to them being male/herm, but at least I got one female that's looking good so far and have to other little plants that haven't showed any sign of pre-flower so I'm just waiting and hoping... the nutrients I got from Mother Earth are doing their job quite efficiently, all the deficiencies my plant had are gone now and they are growing happily...
Likes
16
Share
@Roberts
Follow
Blue Dream Auto is doing well. She is developing her colas. Everything is looking good. I just did a solution change today. Thank you Spliff Seeds, Medic Grow, and Athena nutrition. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
14
Share
@Dunk_Junk
Follow
No photos this week... My bad 😞 😭
Likes
27
Share
Before starting this final smoke review, I want to quickly apologize once again for the harvest report being uploaded on the previous flowering week instead of the official harvest tab. GrowDiaries has been acting a little complicated lately with harvest and smoke review updates, and instead of risking losing photos or information again, I decided to play it safe and upload everything there. So all the harvest, drying and trimming photos are already available in the previous report for everyone who wants to check the full process visually. 🌱 With that said… Welcome to the final chapter of this beautiful Amnesia Skunk journey. ✨ This report focuses mainly on the curing process, trimming philosophy, smoke review, aromas, preservation, and everything that happened AFTER harvest day. Because honestly… harvest is not the end. It’s just the beginning of the flower becoming medicine. After drying, every single bud was carefully hand trimmed, exactly like explained in the previous report. No machines. No shortcuts. No aggressive trimming. Just scissors, trim bins, patience, and intention. Hand trimming is slower, yes. But it preserves the integrity of the flower in a completely different way. The shape stays natural, the resin stays attached, the trichomes stay protected, and the flower keeps its personality instead of becoming overly processed. Everything was saved. The flowers. The sugar leaf. The trim-bin collection. The resin from the scissors. Even the finger hash that naturally builds up while trimming sticky flowers for hours. And honestly… these girls were incredibly generous. The trim-bin collection itself produced beautiful little resin balls full of aroma and character. Sticky, soft, fragrant, and surprisingly potent for something many people would simply throw away. And now… after months of curing… we are finally smoking this beautiful medicine. And wow. This one is honestly difficult to explain properly. The best way I can describe it is: it feels like a sunset walk on the beach. Warm. Gentle. Uplifting. Comforting. Peaceful. Colorful. She’s fruity. She’s punchy. She’s sweet. She touches herbal notes without becoming earthy. She’s fresh but deep at the same time. It’s one of those profiles that somehow feels like everything and nothing simultaneously. Nothing screams too loudly. Nothing dominates. Everything works together. Both phenos ended up being surprisingly similar in terpene profile as well. Different plants, same soul. And curing only made everything better. The aromas did not disappear with time. They intensified. Every jar opening became louder, deeper, sweeter, smoother and more aromatic than before. The inhale became softer, the exhale became creamier, and the overall smoking experience became incredibly comfortable over time. This is a long-lasting flower too. Not only in terms of effect duration, but also in how long the flavor stays dancing in the mouth after exhaling. The buds themselves stayed extremely dense and compact all the way through cure. Beautifully structured flowers with that satisfying weight and firmness you instantly notice when holding them. One thing that genuinely surprised me during curing was comparing storage methods. Part of the flower was cured traditionally in glass jars. Another part was stored inside the Zamnesia metal vacuum curing containers that came with the setup. And honestly… I noticed a difference. The flower stored inside the vacuum container seemed to preserve aromas slightly better and felt more expressive when opening the container. The terpene profile felt a little louder, brighter and fresher compared to the traditional glass jars. And that actually makes sense. Oxygen is one of the biggest enemies of long-term terpene preservation. Vacuum-style storage reduces the amount of oxygen surrounding the flower, slowing oxidation and helping preserve volatile aromatic compounds for longer periods. It doesn’t magically change the flower. But it absolutely helps preserve what is already there. And with a terpene profile like this one… preservation matters. As for effects… This is simply happy medicine. Not chaotic. Not overwhelming. Not heavy. Just… genuinely uplifting. Clear. Warm. Positive. Relaxed. The kind of flower that makes you want to walk slowly near the ocean while the sun disappears in the distance. Honestly, I could genuinely see this being a very comforting medicine for people struggling with sadness, low mood, emotional heaviness or difficult days. There’s something emotionally light about this cultivar that feels very welcoming and peaceful. And comparing the cured flower to the charas and trim-bin resin was also extremely interesting. The terpene profiles stayed very similar between them all, which was beautiful to notice. But the charas had this extra layer of freshness and brightness that almost felt “alive.” Maybe because it came directly from fresh living material. Maybe because of the way fresh resin expresses itself. Maybe because charas simply carries a different soul. Whatever the reason… it was heavenly. And now, as this diary finally comes to an end, I just want to send love and gratitude to everybody who was part of this journey. To Zamnesia for the genetics. To Plagron for the nutrition. To the gear that kept everything running day after day. To the platform itself. To the GrowDiaries community. To the longtime followers and OGs. To the new people just discovering the page. To the curious ones. To the silent supporters. To the lovers. To the skeptics. To the haters. To the people who only stopped for 5 seconds. And to the people who stayed here from seed until smoke. Thank you. Truly. 🌱 This chapter may be closing… But another one is already opening somewhere else in the garden. Stay tuned. A new diary is coming very soon. ✨ 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74
Likes
27
Share
Harvest day 68 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. First of all I would like to compliment Green House for this genetics. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. Unfortunately, this phenotype is nothing special, which is very annoying given the price :-( The smell is ok, but nothing great, but the high is good, which is less important to me. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Processing
Likes
20
Share
3/16: Rain let up for half the day, but more tonight...damnit... They are due for a watering tomorrow, but with the high RH, maybe not... 3/17: They weren't ready for water yet, so I slept for a few bonus hours! (rare) The tall one's biggest 3 colas are starting to thicken...they'll range from 14" to 18" in length. I'd like to see them get to 10" in circumference or better...👈 Rained for most for the day....again... 3/18: I watered them with about 1/2 gallon each including terpinator, signal, sweet & sticky, cal-mag, armor si, endoboost, humic acid, and a little cha ching. It rained all night again..and most of the day today. I took some photos with the qb's turned off and a 135w 5500k CFL on.. 3/19: It rained all night and several times again today...ffs....I've started building an Ark in my free time 😁 3/20: Rained again on and off today..RH still too high... 3/21: Rained again tonight.. I had to pick up a couple of them while removing a couple of other plants, and they are still heavy. I might be able to wait until Monday to feed again, which might be enough time for me to get the RH back down a little bit. 3/22: Rained again last night several times...and again today for a couple hours...ridiculous. Woke up with RH at 65%!!! Been chatting with other FFT growers and they all seem to be losing a lot of produce to botrytis...I'm starting to freak out..😳
Likes
38
Share
@Roberts
Follow
Fruity Pebbles autoflower in the Athena blended line nutrition is growing good. She has a sweet fruity smell at the moment. She has about another week of bulking then a week of ph water for flush time, and ripening. Everything is going good. Thank you ILGM, Medic Grow, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
49
Share
@Roberts
Follow
FBT2401 is starting to flower. She was stunned early on. So I think that has really messed her up for overall size. She is growing well now. Thank you Medic Grow, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 so grow diaries crashed on me mid update. I am redoing the update a day later. Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419