Likes
27
Share
All have taken well to nutrients, will probably keep at same ratio throughout flowering. Will also be using 1ml/l of b52 from flower week 3 and then ripen before flush. A few seem to be fattening up before the others but all are doing OK. Will update every 1-2days.
Likes
15
Share
@38PLAN
Follow
Siamo arrivati alla 10 settimana,una pianta ha incominciato il flush,quella al centro di destra.i fiori delle piante più avanzate sono grassissimi e ricchi di resina,questa pianta é davvero ECCEZIONALE,daremo qualche altra settimana di acqua e raccoglieremo la prima!ricordiamolo sono tutte autofiorenti.GORILLA COOKIES AUTO
Likes
5
Share
This may be her last week. She's at day 56 since 12/12 I haven't decided whether I wanna push her to day 63 or not. She has a nice mixture of amber on the tops already
Likes
5
Share
Likes
17
Share
Couple days left of week 3, and buds are starting to swell, and trichs are forming. I've removed most of the lower branches at this point (which probably should have been done earlier), I'll hopefully do the last of the defoliation this week too. I'm going to bump up the nutes a little for a while before flushing for at least 2 weeks when they are starting to look ready! Smell inside the tent is getting stronger, made me sneeze a couple times when I peeked in there the other day 😅 Have a happy new year!
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
17
Share
@Elpicor
Follow
D57 Ninth week humidity problems, I added a fan in total 3, added an additional extractor that introduces fresh air, I constantly keep the growbox open, so the risk of mold seems to have been avoided. stop PK 13 14 and big bud, now only biobizz for my fat.
Likes
12
Share
@yd_grows
Follow
Decidi arrumar as plantas utilizando arame rígido para espaçar melhor os Buds e garantir circulação de ar e luz para todas as flores. Produção de resina começou a aumentar essa semana, se tornando visível a olho nu a quantidade de resina nas flores. Percebi que as pontas das folhas estavam queimadas, o que é sinal de nutrientes em excesso. Decidi então utilizar água sem cloro para lavar a terra das plantas. Utilizei 5 litros por planta. Como está chegando ao fim da floração, não pode ter tantos nutrientes na terra.
Likes
8
Share
7/3/22 I was a little rushed today, and didn’t have the chance to take any new pics for todays log entry. 🤷 It’s not like I’m not going to add a bunch more photos later in the week. This week we’re starting with the Mid-Bloom, step 3 nutrients on our feed chart. I mixed two separate gallons to feed my 4 girls as usual. Each plant received half a gallon of water with the following: CALiMAGic - 2 ml FloraMicro - 4.7 ml FloraGro - 3.8 ml FloraBloom - 8.5 ml Floralicious Plus - 2 ml Liquid KoolBloom - 2 ml Each of the 2 gallons had a pH of 6.4, and wasn’t adjusted. My tap water has been exceptional lately! Each of the plants had plenty of runoff with the following pH level: #1 & #3 - 5.9. #2 - 6.1. #4 - 5.8 My girls are super tall, and have bodes all over the place. They are all developing nice pistils everywhere, and should each yield quite a bit. I’m looking forward to watching them mature! Happy 4th of July to all of you in the USA 🇺🇸! Independence Day!! Happy growing everyone! 7/5/22 These 4 Ladies are going to be the death of me, I swear! I know you all HAVE to be sick of reading about their growth, but damn! These bitches could be super models! I last measured them on 6/29/22, and was astounded then by their growth. Now, I’m just blown away. Since 6/29/22: #1 has grown 12 inches, and is now 55 inches tall. #2 has grown 11.5 inches, and is now 54 inches tall. #3 - 12.5 inches, now 49 inches tall. #4 - 14.5 inches, now 51.5 inches tall. I had to do some mild LST today. I tied a bunch of the branches on #1 & #2 today. Loosely, but closer in in order to improve stability, and open up space in my tent. Some of their branches have become so long that they are being pulled apart by gravity. I used some rubber coated, malleable metal poles to tie loose circles around branches, and then wrap the other end around the other branches on the opposite side. I also defoliated #1 & #2. It’s not pretty, but it seemed to work. I need to do the same to the other two, but time, and supplies didn’t cooperate. Enough about the maintenance. Let’s get to the feeding. We’re keeping with the mid-bloom nutrients mixed into a pair of gallons full of water. The pH of both gallons measured at 6.4. #1&2 share 1 gallon, and #3&4 share the other. Each gave back plenty of runoff with the following pH levels. #1 - 5.9 #2 - 6.1 #3 - 6.0 #4 - 5.8 The tent was 83F, with humidity at 65%. I’m hoping the adjusted fan helps with the humidity, and I also hope my girls react well to being tied up. Happy growing everyone! 7/7/22 Today, Stella’s Cuatro ended up getting the same treatment as their mother. Each of them were the recipient of some serious High Stress Training (HST). All of them have super long branches that were making them almost unmanageable, so I got to taping and bending branches today until nearly all of their branches had been bent over 90*. Sorry for the asterisk, but I didn’t have a degree icon to use. Bending their branches made space in the tent to some degree as well. They don’t look so crowded anymore, but later on I’m going to have the same issues that I’m having with their mother now. Branch weight! It seems silly to complain about all the time, but damn they are all huge plants! I know that some of you may be thinking that you’d probably rather stay away from this cultivar, but that would be a mistake. I bitch, and moan a lot about these plants, but regardless of the headaches they give me, they are still absolutely wonderful plants. They grow strong and healthy regardless of what I do to them. They develop ginormous buds, and the effects of this cultivar are still my all time favorite. They are resilient giants that produce a lot of bud! The first cultivar I ever grew was this one, DarkStar, and 1 plant produced almost half a pound of top shelf bud after everything was dried and jarred up. I’m looking forward to another wonderful haul from these 4, their mother, and another 2 younger siblings.” Each plant received 1/2 gallon of solution with a pH of 6.5. Each has sufficient runoff except #3. She didn’t have any runoff. The others were as follows: #1 & 4 - 5.8 #2 - 6.0. The tent was 83.3F, and humidity was 56%. Life is good. Happy growing everyone!
Likes
2
Share
Day 21 She had a rough start, but now shes growing good , but not perfect Lets wait for 1 week more how she goes
Likes
23
Share
This week has been great ,today is day 78 and the girls are just doin their thang , 1 looks ready for flush already and the rest look about another longer then flush for them aswell,, can’t wait to see how these girls finish out over the next couple of weeks 😍!! Y’all keep them eyes peeled an stay tuned for next week! Peace love an positive vibes to y’all Cheers.💨💨💨
Likes
25
Share
@BudHaks
Follow
Week 13! I have decided to stagnant harverst her in two parts as there is fresh growth in her lower half that the light cannot reach and the top buds are mature now and at the optimal cloudy trichomes I'm looking for are present. Look at all those trichomes heavy leaf and buds! She is heavy and smelling amazing with hints of fruit and cookies. I will also be flushing her next week! What an amazing journey, coming to an end!
Likes
33
Share
@Ema26
Follow
Day 50: Finally reached the third week of flower and she’s looking great. She continues to creep upwards while developing lots of sites and pistils. I’m hoping to see some bud development sometime soon. I’m also considering 18/6 light schedule if anyone has any opinions on it. I continue to feed her as before and I’m having no problems yet. Very excited to see what this week brings! Any comments are welcome! Happy growing! Day 51: I’m seeing no major differences since yesterday but she’s looking great! I’ve decided against changing the light schedule as I don’t want to stress her at all. She’s still not dried out since watering a few days ago so possibly too much water has slowed growth. Not concerned at the moment as she’s still progressing and looking great. Day 52: she seems slightly fatter. Maybe my eyes are being impatient😅 it’s still surprising me how quickly the medium can go from being nice and moist to bone dry. I’ve watered her today with slightly less grow and slightly more bloom and top max, hopefully she shows a positive reaction. I’m running out of head room rapidly so hopefully she doesn’t stretch excessively anymore. She’s also smelling a lot stronger today, not that I’m complaining😎 Day 53: definitely looking and smeller a lot better today. She must’ve liked the feed I gave her. Day 54: she’s smelling great and growing great. I’ll water her again tomorrow morning increasing bloom and top max dosage and lowering the grow. Hopefully she carries on like this. Day 55: watered today with a bigger dosage as above and she seems great. Smelling nice although I can’t see any major differences she’s definitely taking her sweet time. Day 56: she’s definitely shining more today and smeller stronger. Still no major differences, I’m looking forward to seeing what next weeks brings.
Likes
5
Share
@Skipi007
Follow
Hi, the next week was without any problems. The girls are gaining weight nicely. The first one drinks 2.3 l, leaks 0.5. The second one drinks 1.7 l and leaks 0.5. The second one only gets Dragon force 4ml/l + a drop of calmag, I would like to fertilize this week and then flush for two weeks. The first one is about 2 weeks behind, she gets basic rotting + everything else except dragon force, but in a week or two I would like to start giving her only dragon force.