Now that V started, both ladies have began flush. Nemo actually started early last week since (20 ml heavy 16 finish and 1 gallon of RO watrr per feed). Nemo on left, a little less directly under the light is more developed, both bud structurely and trichome color (clear transitioning to cloudy or milky trichs more each day). V on the right side is much less finished, being a more haze influenced pheno. it seem lankier and slower to finish, however severe light stress from being grown up to close to light has bleached maybe 6-10 tops of the 15 tops on v. nemo will be done sometime later this week or early next week. Going to harvest the tops entire plant on nemo, then rewaeave V back thru the scrog to allow greater distance to light and better airflow for it to fill in a little more and finish up over next 2 weeks or so. will be closely monitoring bud sites in top colas to harvest when trichomes are almost fully milky white, just before amber.

Was a difficult week, because the plant was at the very back. I got some small % of bud rot. Very small. Buds are very dense. Dripping in trichomes. Colorful, and very stinky. What a beauty.

Flushing looking a lot better than I thought

beginning of week 2. they are all doing well, up potted once and they immediately took over the new fabric pots. i think I may go up to 1 gallons before I put them in their final airpot 3 gallons, depending on my work schedule. did upload a timelapse but the file got a bit corrupted. good enough anyway everything seems to be going well except I really can't decide how I'm going to grow these plants (structure-wise) and it's getting to the time where I need to decide. I've had awesome results with LST, quad line, just topping and some light training, SCROG. Really can't decide what to do here but I'm sure it will come to me. Temp and humidity have been super consistent which is awesome. I have a bunch of new stuff coming in the mail from AC Infinity, a new controller that will allow me to program day/night, right now I manually adjust it on my phone before I go to bed with the Elitech controllers. Also a new exhaust fan because the bearings in mine are shot and it's super loud, two 6" oscillating circulation fans, and a new commercial humidifier.

Still week 5 9/19/20. Started some low stress training with pipe cleaners and floral wire. Leaves look a little damaged, tiny brownish spots.

The harvest is coming soon also for Strawberry Gorilla and Orange Sherbet, news this week the strawberry pie has grown, who knows if it will make buds full of resin or seeds, maybe both? We will see! the story continues...

I used overdrive fertilizer again this week. My God, girls get more beautiful like this. The last weeks make me very happy.😍🌷💐💥⚘️👽👽🎍 From now on, I will be very careful because the more I improve the conditions, the better results I get Especially the temperature difference between night and day. humidity Box ambient temperature 👊👊💧♠️

Die Wurzeln hatten das gesamte Volumen des Topfes durchwachsen. Die Hauptwurzel war allerdings nur etwa 15–20 cm lang; der restliche Wurzelballen bestand überwiegend aus sehr feinen, stark verzweigten Wurzeln. Wahrscheinlich lag das an der unzureichenden Belüftung des Wurzelbereichs. In einem Stofftopf wäre das Wurzelsystem vermutlich besser entwickelt gewesen. Die Trocknung erfolgte in einem Textilschrank auf dem Dachboden. Die Temperatur lag nachts bei etwa 5–10 °C und tagsüber bei ungefähr 10–15 °C. Das Gesamtgewicht nach der Trocknung betrug 117,55 g. Der durchschnittliche Gewichtsverlust während des Curings lag durchschnittlich bei etwa 2,61 % (siehe Tabelle). An der Messung des Gewichtsverlustes während des Curings nahm nicht die gesamte Ernte teil, sondern lediglich ein Teil davon. Die untersuchte Menge war jedoch ausreichend, um den durchschnittlichen Gewichtsverlust zu bestimmen. Das über 49,9 g hinausgehende Gewicht wurde ordnungsgemäß entsorgt.

9.1.25: Pink Mist

Night time photos so ladies look a little droopy from being in the light all day. Woot woot Cheers to Ecofarm for Fast and friendly service. Got the grow bars in today and they will added to the tent, they are 90w Led grow lights 4 feet long with Banks of Sanan Epistar Smd 2835 and Osrams. PPFD of 198 @ 18” added to the power already there and we got a heck of a light setup. The lights are of great quality and have a three year warranty. Next big investment will mostly be an Apogee Light Meter, tired of fucking around and playing the Guessing game with “Lux meter” on the cell phone. After we acquire the ppfd meter the next step will be acquiring parts to build our own grow light. Also planning on experimenting with light moving technology next grow so we can avoid some of hot spot issues known to be present with Cobs. Lights lights everywhere lights what the heck is going on here? Well the whole idea is to have a ppfd that is as close as possible to 1000 or higher Par/ppfd at 5 foot by 5 foot. Ladies will burned but yields will be large. No guessing or estimating yet. Taking a wait and see approach. The purple gelato mutant is still showing signs that she may indeed be going into flower. Not overly concerned, just kind of cool thing. So all said and done we will try to run 6 side bar lights. 4 cheaper led bars equaling about 180w with 2 Chinese high quality led that are also equal to about 180w. There is also a 2000w Cob grow light with 4 cobs and a bunch of leds draws about 400 watts. And finally a Parfactworks 500w grow light draws about 150 watts. These are all give or take numbers so really I could be drawing 1000 watts or I could be drawing 800 watts. Not really concerned about the power draws we are after bigger weights. And without investing in a new grow light this was our best course of action. Pleased with how everything is progressing and looks great. So I'm actually kind of not use to plants growing this fast every plant is showing gender now in some way. The mutant is most likely not pushing into flower. But again I'm not use to plant growth this fast... Umm #@$% you Advanced Nutrients I used them for half a year and never really had anything to compare them too. This is a superior product in every single way including Price.. Thank you Green Planet Nutrients for making a fantastic product. SMD 2835 – A cheaper led fairly efficient rated at 2.2umols/j with a 3 year warranty offers good value to performance. Comparable to Lg 5830s and Samsung 301h(b) But not as energy efficient. PPFD - photosynthetic photon flux density A link to a video with Dr. Bruce Bugbee a very respected and valued member of the Cannabis growing community. In the video he explains a lot about light intensity and yields. Seen it first hand and this gentleman does indeed know his stuff. Here's a link: https://youtu.be/ID9rE5JewVg

D23 Looks like the calcium deficiency affected the growth on #2 a bit as it is a little behind #1 D24 I cut off the infected fan leaves on #2 also it's looking really yellow D28 #1 really thriving compared to #2. Going forward I will be posting pictures of #1 only Made a newbie mistake and fed my girls without checking the ph level.... hopefully no major side effects pop up

Well I having been laggin with update but I think am up to speed now...well u kno the fitess of the fitess must survive....still been having so water lag issue with the older one so finally decided to change the pot but she still managed that bit of stress good well see what happens in the rest weeks to come.....the other two are 6 weeks this week ...the one that got hst not by choice the crown is barely hanging on have some tape holding it managed to push a seed....this strain seem to be very resilient.....look at dem resin and this is jus the 2nd week of flower....until next time happy growing

Week 8, almost ready for harvest. Some pistils need to get Brown and the trichomes milky. IT was a short jurney. Banana purple punch auto from Fastbuds is a resistent fastgrowing plant.

The girls are growing great, I just been feeding CoconutWater and Aloe Vera this week I’m add Big bloom and Voodoo juice to get the roots really growing. Moving along Stay tuned

Wonderful color😈 The smell is divine🤩 The trim was super easy & the buds are dense & super sticky👌

Muy buenas a tod@s... Bueno otra semanita para la psicodelicia... Me va gustando, la veo fuerte, crecen bien y rápido, ahora la veo decaída, pero se pondrá bien..💪🏻💪🏻 De momento todo en orden, buen ambiente y buena luz, una semana más y a floración... 🌱 A ver q tal sale... Bueno espero les guste... Un saludo y buenos humos para tod@s... 🔥🔥💨💨💨 ⚕️😎💎 🇦🇷🤝🏻🇪🇦

hi guys I take the photos with a new camera i take it in 4k mod 😀👍 but idk if it's 4k on the website because he resizing the picture. 😒 some news we can see the roots go through the pot. She can take more oxygen 😂 I do sometimes some small defoliation. I reduced hours on week 6 to switch to flowering period, the way than i take : day1 18/6 day2 17/7 day3 16/8 day4 15/9 day5 14/10 day6 13/11 day7 12/12

Starting second week, waiting to start LST! Day 10 : Start LST on Girl scout cookies#1 Day 11 : Start LST on Gorilla Glue#1 Day 13 : it's a very hot day, 37^C!