Processing
Likes
Comments
Share
@
Follow
Likes
6
Share
Likes
Comments
Share
@anann
Follow
This is week 9 . It so fucking crazy . this is my first time to see cannabis flowering. I can grow batter.
Likes
28
Share
First of all, I’d like to give a HUGE THANK YOU to Fast Buds for allowing me the opportunity to grow their new strains! I'm starting out with CC this week and will start the CA in a couple of weeks. There is some data out there on the CC strain that seems very legit to me. If that info is correct one of the C's stands for Cookies. I really love the Girl Scout Cookies I grew from Fast Buds, if CC is related to GSC she should be amazing! 👍 Dropped the seed in the soil today, I'll update once she pops. She's front-center in the group pics. My Perpetual Harvest strategy…. Originally my plan was to start 2 seeds each month, but had some seeds from one breeder that did not germinate early in my rotation. Ultimately, this caused single seeds to pop and messed up my 2 at a time plans. But, that seemed to work out OK, because now I think starting one seed every 3 weeks is a better strategy. This should provide me with 4-5 plants at a time, instead of 6. However… Since Fast Buds has been kind enough to allow me to preview their new CC and CA strains I am now going to be starting a new seed every 2 weeks. This should allow me to get all of the plants I want to grow this season in the perpetual harvest rotation. I need to shut down over the summer because my tent is currently in the attic. Plants get fed once weekly on weekends. Seedlings get water only. Plants in vegetation get water and Recharge. Flowering plants get water, Recharge or Big Bloom (Fox Farm). Feeding is done using 2 gallon watering can. Any additional waterings during the week are given on an as needed basis per plant. I lift the plants to help determine which plants are more dry (lighter) and provide water any plants via water bottles and watering spikes. I give each pot a quarter turn every day in an effort to make sure the plants get equal lighting from all sides. I rotate the plant in place by turning the pot 90 degrees (I am not rearranging the layout of the plants in the tent on a daily basis). The soil is an ‘organic super soil’ I mixed myself using organic top soil, organic potting soil, organic compost, organic peat moss, organic perlite, organic vermiculite, lime, epsom salt, expanded clay pellets and Jobe’s organic fast start. I am also recycling my soil and water with Recharge when using recycled soil. For plant training I have tried a variety of things, but my plans now are to do LST bending only, no HST anymore. I may decide to go back to HST again in the future, but I’m curious to compare LST training only to see how that goes. Around 3 week I'll do a FIM cut/pinch once there are 4-5 nodes established. And some defoliation around the 3rd week of flowering. I have been doing HST bending and having good results, but think the HST may be causing the plants to take longer to harvest. I hope LST only will help increase harvests while getting me to harvest sooner. Setup: 1- Grow Tent 24”x48”x72” 2- Viparspectra 300W LED’s (1-V300 & 1-R300) 1- Hanging 100w CFL (26w actual) 1- Carbon Filter w/ 190cfm Fan & 4” ducts 1- 6” clip-on fan 1- 700w electric heater - oil filled radiator (in front of air intake behind tent)
Likes
4
Share
Everything is going well im still waiting the biger plant to recover from the volume of nutriment that i give here
Likes
6
Share
@Naujas
Follow
On the 50th day, freezing of the leaves was done. it seems that it did not cause stress to the girl, and her leaves were all looking at the light the next day :) The girl drinks a lot, she needs 4.5 liters of water every 4 days, the girl received full nutrition on the 53rd day, the water ppm was 1100:) "strong girl -strong food ":D everything is going very well:) On the 56th day, when I came I saw condensation formed, the humidity showed 85%, I put a dehumidifier in the tent, so everything is fine :) good luck to everyone..Also, the girl received a "MarsHydro vetiliator" as a gift for her amazing growth :D she likes it :) she's happy - I'm happy :).
Likes
6
Share
I've had to label these A B and C as they've got bit big with in the week lol I'm going to leave A to do her own thing will be FIM to B and topping C today and a bit of pruning as well @Kannabia
Likes
18
Share
Bud sites are producing black/purple spot in leaves. Bud growth is producing as the days go by. Really excited with this being my first grow Nitrogen boost really helped with the deficiencies. Plants are starting to look really heathy... Prunes lower colas that weren't stretching past the canopy and receiving energy so more energy can be used towards the top buds
Likes
27
Share
@AsNoriu
Follow
Day 78. A bit forced by bud rot chop. Hot and humid summer, not the best ... Girls still ended up nice with almost 0 care. Happy Growing !!!
Likes
7
Share
No complaints, I like just letting the plant do what the plants wants to do. She lets me know when to feed her. She has been drinking close to a gallon of water a day.
Likes
11
Share
The plants all look healthy going thru this first budding phase we are almost done with week 2 of flower which will end on wednsday. I bought some pot elevators, and tied apart a few tops growing closer together. All plants tops look even except the first split plant which has a few stretchers, Not to bad tho. I feed 2 times a week and the rest straight distilled water which reads 6.5 ph. Assuming my coco's natural ph balance is wearing slime starting week 3, I'm going to ph to 6.2.
Likes
34
Share
started flushing, plant should be ready in about a week nugs are still fattening up a bit with some new white pistils some of the trichomes on the leaves are turning amber, waiting for the trichomes on the buds to turn completely milky and then she should be ready for harvest
Likes
10
Share
Again this was a great grow, everything was dialed in right, the Shiskaberry has a great smell, taste, and high..if you haven't grown it yet give it a try, you won't be disappointed. Until next time, smoke a fatty, help out your fellow grower.
Likes
17
Share
Hi meine lieben, 🤗 Die 2. Woche der Wachstums-Phase steht an... ...und die realität schlägt zu. Hatte versucht diesen Run mit einem höheren VPD-Wert und dadurch ohne zusätzliches CalMag hinzufügen zumüssen, laufen zulassen. Da laut einer Studie, man durch einen erhöhten VPD, kein zusätzliches CalMag unter LED's hinzugefügt werden müsste. Allerdings gieße ich noch mit Leitungswasser. Also hatte ich mir mal die werte meiner Stadtwerke angeschaut. Und in meinem Wasser habe ich Calcium = 78 mg/l und Magnesium = 5,3 mg/l und somit ein verhältnis von 14:1😰. Was von einer Optimalen versorgung von 2:1 - 4:1 CalMag etwas entfernt ist... 😅 Beste Lösung wäre ein Filtersystem wie der Watertrim zu nutzen. Günstiger ist es Mono-Magnesium (oder bei bedarf Mono-Calcium) zu besorgen und das Wasser im richtigen Verhältnis auszugleichen. _________________________________________________________ Optimale CalMag-Versorgung in den einzelnen Phasen: Sämling: Cal: 50-60 mg/l Mag: 20-30 mg/l Wachstum: Cal: 80-100 mg/l Mag: 30-50mg/l Blüte: Cal: 100-120 mg/l Mag: 40-60mg/l ______________________________________________________________ Wie mein Ablauf in dieser Woche genau aussah, habe ich auch diesmal für uns Dokumentiert. Ich wünsche dir viel Spaß & Happy Growing 🌱🤗: _______________________________________________________________ Umgebungswerte der Woche: - Temperatur: 25°C - Luftfeuchtigkeit: 65% - VDP (Room): 1,1 _______________________________________________________________ Tag 8: - Nur beobachtet 😋 Tag 9: - Pflanzenhöhe gemessen: 17 cm 🌱 - Stamm-Durchmesser gemessen: 0,48cm = 4,8mm Ø - Licht Intensität eingestellt - PPFD: 310µmol / DLI: 20 Mol Tag 10: Bewässert 👇 (Leitungswasser): - Volumen: 1000ml - PH-Wert: 6,15 - EC-Wert: 0,46 - Temperatur: 20°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,5 - EC-Wert: 3,6 - Temperatur: 21°C - Volumen: 350ml Tag 11: - Nur beobachtet 😋 Tag 12: Bewässert 👇 (Leitungswasser): - Volumen: 1000ml - PH-Wert: 6,1 - EC-Wert: 1,52 - Temperatur: 20°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,6 - EC-Wert: 3,1 - Temperatur: ca. 22°C - Volumen: 280ml Pflanzen Training: Fimming, Vor-Lollipopping Lampenabstand eingestellt: 50cm Licht Intensität eingestellt - PAR - PPFD: 280 µmol / DLI: 18,2 Mol Pflanzenhöhe gemessen: 20cm 🌱 Tag 13: - Nur beobachtet 😋 Tag 14: Bewässert 👇 (Leitungswasser): - Volumen: 1200ml - PH-Wert: 6,1 - EC-Wert: 0,48 - Temperatur: 21°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,38 - EC-Wert: 2,5 - Temperatur: 21°C - Volumen: 360ml Pflanzenhöhe gemessen: 24 cm 🌱 Stamm-Durchmesser gemessen: 0,70cm = 7,0mm Ø Lampenabstand eingestellt: 40 cm Licht Intensität eingestellt - PPFD: 340µmol / DLI: 22 Mol
Likes
3
Share
Likes
16
Share
I’m adding a timer to my exhaust fan so it won’t be running 24/7 I’ll set it to exhaust the dry room every 3 hours for a half hr. I have my dehumidifier running in there so it’s not going to get above the set level. My only concern is mold, considering I only ever lose a few grams each harvest from mold I figure I should be safe if my humidity stays under 50 from here on. Would have went a lot smoother if everything was done the same day because the humidity would gradually go down on its own while the buds dry out however I have been adding plants as they finish causing timing to be off. Would have liked to just check them every few days. Now I’ll have to check them daily knowing some will be dry before others. Bright side is that gives me a break from trimming. It’s only me trimming so it’s going to take me a while. Roughly 25 plants each with a few ounces so I hope it’s only around 2000 grams to trim by myself
Likes
21
Share
Bushy little mama. Removed the tobacco plants as they were taking over the tent. She is on her lonesome now so she can make full use of the space available. Looking like she needs some defoliation pretty soon. 3/10 Gave her a radical defoliation. Took away about 85% of all the larger fan leaves and some lower canopy growth. I want all the plants energy to go into flowering and developing large kolas. Don't expect the auto clone to get much bigger, so won't be potting up, but she may produce a decent kola.
Likes
12
Share
@ciansta
Follow
I’m going to leave the seedlings in the small brown pots until their 1st node and then I’ll transfer them into bigger plastic 3.5gal pots with 80/20 soil to perlite potting mix. One Dosidos is looking a bit behind and the one with the weird leaves ended up catching up to the Northern Lights, maybe even growing faster than it. All Dosidos’ ended up dying but one and I’m sure it’s on the way out. Northern Lights has had no issues and growing perfect.