Not much to say about this real first grow week’s start. Everything looks ok, steady growth at 40% light. I had to restart the control app a few times, therefore the broken graphs. At night times, the control software tries to attain optimum humidity rather than optimum VPD. That’s why VPD is dropping when the lights are out. CO2 is back to baseline – really wonder what the reliable values are … I found I have to silence the blowers when a timelapse photo is being taken. The shaking you see at the beginning of the grow video should not appear, or to a much less degree, in the future. Day 13 (July 30th) shows good, steady growth. Leaves are a bit spotty, although less then the processed images show. Something to be worried about? I would not currently … All are developing their 3rd nodes now. The controlling Raspberry Pi crashed last night when I tried to access it remotely … ;( – looks like the Connect software is in need of an update. The leaf temperature sensor is now really aimed at lady-to-be nr. 1’s leaves. Nothing to change that I see. I won’t cut the top yet, just watered the outer circle of the big pots slightly to encourage root growth. Day 14: Nice growth. First plant is now at 11 cm, and at 12 cm on day 15. Nothing special to report so far, except for I had to move the internal camera a bit upwards to keep little lady #1 in focus. Day 16 and last day of this week (Aug 2nd): The young ladies are now at about 14 cm tall. Growth looks very compact though. I think the two inside girls will lose their heads next week; I’d still prefer to have one or two more nodes available. Pictures of this day are taken at the end of the plants’ day. Notice their leaves are pointing upwards, which should be a sign that they want more light. I turned the lights up by another 20% for a total of 60 W now. Weather was pretty hot the last days so it wasn’t possible to stay in optimum VPD range but as long as growth is this satisfying I don’t mind. I will water them slightly at their next day start. Outside plant’s soil humidity might still be at around 58% officially, but drying starts at around 40% with this measurement and the sensors are placed quite closely to the stems so outer soil is dryer. I am preparing the plant water with some additions and a frequency imprint suing some Solfeggio and Schumann frequencies.

All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 28 Just a quick update for this morning since I had to move the ties a little. LST, I now have them above the 3rd node branches. Stats are normal and the growth tips are turning upward now. Stats 73F/ 63% RH /IL Vent at 33% - Lights also same as before 345ppfd highest, 330 center, and 315 at lowest. No need for adjustment. She seems to be taking the training well. Day 29 Water day - checked last night and decided it was time again - Water by weight again so no runoff to measure at about 4 cups. (4 days since last feed by weight) 13lbs even par is 15lbs 4oz so I prepared 2lbs 4oz of water. Tested my meter and discovered it needed calibration (the temp is off and cant be calibrated - so I used a trusty meat thermometer. started with 4ppm and added 300ppm of epsom and vegmix ph balanced to 6.34 at 69.8F - then splashed with H2O2. Poured around roots and splashed the stem base - sprayed some on the leaves and use the whole amount. Had to adjust lights now to be brighter so I brought them down to 18.5" and ppfd is now 375highest 360 center and 345 at lowest. VPD is normal at 1.0 with 73F /63% RH /33% IL Vent - fans are pointed to directly now as the leaves are starting to get rough feeling - so I moved them a bit to blow less directly Training is doing good nice upward turn on the training (making small LST movements with the ties other than than... just letting it make new branches. Day 30 Checked PH and got 5.0 on my meter(+1.25 tested differential = 6.25) Stats normal too - 73F /64% RH /33% IL Vent - Lights at 385highest 370 center and 355 at lowest Removed cross ties since they are no longer needed to hold the fan leaves- training still looking nice as the new nodes are formed with 2nd node leaves growing already. Day 31 Identified an issue this morning - went back through my pictures, identified the start, looked at the day before, and noted my changes that I took notes on at that time. Went to google to diagnose a few possible hypothesis and am now testing with a treatment. (suggestions from more experienced growers welcome) This morning the issue was brown spots on the older fan leaves. Mostly just the left fan leaf. Seems to have started 2 days ago (day 29) when I changed the lights and fed her. When I fed her, I left water droplets on the leaves instead of drying them off after a short time (I had been drying them with a tissue after a wet pic. The fans were also adjusted after the lights were dropped closer as well. Hypothesis: I think the water was magnifying the light and caused light stress at the those spots. I dont think the wind of the fan had much to do with it other than they helped dry the leaves faster as noted by the water being completely gone by the time I took pictures later that night for measurements. Test: Raised my lights to a max of 350ppfd (from 385 highest reading this morning) Had to adjust fans again since they rest on my lights. Will observe looking for improvement over the next few days. ... another possibility was given to me by Guru @Roberts (thank you) as it possibly being a ph issue locking out calcium. So I thought I might test ph and then try diluted cal/mag in a spray if my soil is too low (also looked at pics and seen VERY close similarities in my pics and those) and so on that advice, I tested/calibrated my soil meter (it FINALLY calibrated for me!)I found my soil was avg of 3 readings at 5.153 (5.08,5.09,and 5.29) NOT GOOD - potentially locking out most all nutes. I weighed out about 2 cups of purified water with and added about half ml of CalMag, ph balanced the water to 6.5 at 69.7F (my research shows Calcium lockout starting at 6.3 or lower) and splashed with H2O2 - I poured most around the base and sprayed the leaves too. I made sure to use the whole solution by pouring the last of the solution in the spray bottle over the stem and stem base. EOD follow-up Found a possible calcium blockade in my ph and on my leaves (of which are now starting to curl so I placed my fans on oscillate to ensure they aren't doing more damage) --- fully documented now. otherwise measurements are now documented too. -- second node is starting to pull away from the last top so I will be looking to top again (3rd of possibly 4 total) and then HST and bind in a new spot Day 32 Doing a morning and evening check her now while I see this issue resolved. So far no sign of improvement since last night - might have gotten worse in comparison (will check pics side by side today) but I think because it's a immobile micronutrient so it should take time to stop then reverse. So in the mean time I am doing a slurry test as a 2nd test for my soil before I treat it. I took soil from 3 different spots and made sure I got some from about 4 inches deep in each spot (ensured calibrations were still good with buffer tests) 1st test is a PH meter tested directly in the soil. After using the 2 cups of 6.3 yesterday I got 3 readings today = 5.47, 5.32, and 5.5 to avg 5.43 - (yesterday's readings prior to treatment were 5.08, 5.09, and 5.29 to avg 5.153) - still far below the normal 6 to 7 for soil and the requirement of 6.3 and above for calcium to enter roots. suggesting again lockout. So while I am checking the plant conditions I also looked at the new nodes - 2nd node is starting to pull away from the first, but not quite enough to top yet - thinking I will be able to top tomorrow evening - should be able to correct the ph tonight, so I can see if there's results in that by then as well. I also set the fans to oscillate last night, so here's a video for that now. Measurements, ppfd, and vpd will be in tonight's check-up Day 32 So I started this evening by testing the run off with 2 meters, 5.7 and 5.67 - prepared 1 gallon of 7.5 ph water and splashed with H2O2 (checked with both meters) Before flushing, I documented the leaves again - still curled and look very dry but they still have some flexibility with them - they dont seem to getting any worse so the spray may have gotten enough to the leaves most affected. The new nodes and growth tips seem to be okay but not growing as fast as they were. That would still mean that the soil needs treatment before the roots begin to die off and I end up with stunted growth overall. SO I flushed the whole gallon and noted the runoff from the sides and bottom. I then tested the soil directly with 3 readings 5.95, 5.8, and 5.73 for avg 5.826 and tested the runoff water with 2 separate meters for 5.91 and 5.85 Not sure if I should feed dunk in 7.5 still or just use that number on the next feed in like 3 or 4 days. will discuss Other than that ppfd highest is 360, 350 at center, and 330 at lowest. VPD was 1.0 with temp at 74F /63% RH /33% IL Vent Growth tips could be ready to top again tomorrow night, but I would like the get the ph taken care of first. Day 33 Started the day by noticing the lower branches seem to stop turning and the next level branches seemed to have finally turned but nearly as fast as the first. (Noticed them having a start yesterday) Newer branches dont have any signs of issues. So the plan today is to make Bloom Juice for later. Feed Dunk with 100% Veg Juice at a ph of 7.3 test runoff and ppm. Top the 4 nodes and remove the lower leaves. Calcium issue or not, that was always the plan with main-linning the plant. However, because of the health issues, I dont think I am going to go past these 8 colas - rather instead I will simply stop here and do some HST to set them how I want them to grow and let her recover and finish her veg for about two or three weeks. Dunk had 300ppm of Epsom, Veg juice, in a little over 3 gallons of purified water. I had 7.4 ph and splashed with h2o2. I pushed the entire plant into the water and soaked for a few seconds. Drained by hanging the pot up for about 10 minutes and the stream started dripping instead. Checked the runoff with 2 meters 6.01 and 5.93 with 2580ppm. Then I topped all four nodes and removed the fan leaves from under my mainline. I used LST to finger press the new branches apart into the direction I plan to move them to get the nodes powering up. Next I will wait for a day to do HST on those new branches. Tonight I will simply let her rest. VPD still at 1.0 - 73F /63% RH /33% IL Vent - Lights are at 365 highest, 355 center, and 335 lowest. No need to measure for growth now as I dont plan to top anymore Day 34 Early entry to day for HST the morning after topping. So I started off the morning checking stats and health. PH levels are still low. 3 soil meter tests 5.41, 5.41, and 5.44 for an avg of 5.42 - kinda at a loss here but can only monitor now. VPD and lights are mostly the same - 74F /63% RH / 33% IL Vent - VPD not relevant today as the settings are the same and I am using HST to change the plant position. leaves are noted for future reference - all four lower fan leaves have signs of calcium deficiency but not progressing nearly as fast as the first two did, so I think my attempts via higher ph water and feed may have helped. (I know the microbes in the soil are supposed to help get past ph issues , but mine seem to not be heathy) HST used a cuticle rod from my wife's nail case and a paint stick to press the rod against the branches and smash the inside of the elbows I want to bend. LST I then cut 4 strips of garden wire at the same length, hooked the ends like candy canes and aligned them about 1/2 inch above the new node and into the soil. From the side they look level but have the leaves now facing sideways. They will turn in a day or two.

Poisoned against insects

This week has been really hard. Until this week the electricity was turned off on average once every two days, for 4 hours in the evening peak time. But the last 7 days the electricity is turned off twice or thrice a day also for 4 hours. I think that in this case it is better to reduce the light day and slowly started to reduce it at the beginning of flowering, and already reduced it from 18 to 16 hours, and that was a bad idea (((: The temperature outside was already around 30 degrees in the shade, and it rained almost every evening, as a result, the air humidity up to 65-70% so it was impossible to leave the girls in a closed box without a working fan. I had to cover the windows and work with my hands waving a piece of cardboard)))), adding back 30 minutes of evening sun outside the window each day. Same story since morning, but this more positive, we meet the morning sun, and move around the whole apartment behind the light frame of the window, running away from the shadow))) the main thing is that the morning is sunny, because will have to continue working with a piece of cardboard until the light is turned on (((: Also, as you can see in the first photo, I installed a large fan and removed the lower wall of the box, because the ventilation system did not help ((: Looks crazy but I already like it, new challenges and new experiences all the time, big plus a good habit to wake up at dawn! So no matter what, we are happy and breathe deeper 🙏

Plants are doing well, The 84" inch tent is a must if your not training or topping. I removed all the sacks that appeared last week and I haven't seen anymore show up so fingers cross, I check daily. Bigger tent also helps with heat control as the air has more room to rise. Hope you all like the pictures, I started to take videos as they provide more detail with less work.

The beginning of Week 6 of Flower and boy is she getting stinky. I have high hopes for this plant to live up to her name .

If we look closer we can see bored leaves , i think we have little stress, but this plant is Perfect !!! Bravo Inseedious 💪

Starting to really be thirsty. Soon as I started the nutrients they started drinking almost twice as much water. Did some low stress training this week and probably continue tying back and levelling through the next two weeks. Since it’s an empty tent right now really letting them stretch out ;p

(Days 21-28) (Day 23) I like the amount of stretch I’m seeing on practically all the plants. I'm going to lower the light at the end of the week to stop the stretch. The more stretch they get in veg the less I have to lollipop or prune down the road. Makes lst easier too. I’m going to try topping this week. Last time I topped at the 7-10th nodes and didn’t get the best horizontal growth. This round I’m ready to give everything 3 or more toppings, stay on top of training and defoliate much less. This soil looks insane. I should have added a thicker layer of oats because it’s starting to look proper. (Day 24) Got my stuff from the hydro store today and amended my soil again. Next visit I will be grabbing a P booster like bat guano before I enter flower. Today, I got the 2gal pots, some primo worm castings, 5-2-4 insect frass, 0-0-22 langbenite, 1-0-3 alfalfa meal and an exhale co2 bag. Guy at the store said it gets his 4x4 tent 1000ppm+. It takes a few weeks at least for it to start putting out any amount of co2. I got the room sealed and two fans bowing. I fed a compost tea with a little bit of each dry amendment, BSO dry compost, boogie brew base and worm castings aerated for 24h. I diluted it to about 850ppm which still might be a little high. (Day 25) Opened a bottle of EM1 that was improperly stored and it exploded all over me and part of the tent. I wiped off the plants but there is still specks here and there. Cleaned it off and sprayed with method1 pps. (Day 26) Topped 9/15 plants. Will do the rest next week once I see a little more growth. 5 of the bbb’s I started 6 days after everything else so they are still quite behind. I’m going to push the transplant another few days until they recover. Going to start lst after transplant. (Day 28) Transplanting into 1.6gal pots that I thought were 2gals tonight... Depending on how many females I get, they will be going into either 3, 7 or 10 gallon fabric pots. Growth is looking solid so far, zkittlez and the 3 WW’s are leading the pack in terms of growth speed and cotes are yellowing out. I’m pretty sure what I have is a zkittlez bagseed but there is also a strong chance it could have been from some shitty Canadian biker weed. I accidentally misplaced the seed so it’s possible it got mixed up and I germinated the wrong one. Judging by the rapid growth I’d say that’s a fair bet. Biker weed is notoriously fast growing. Either way it won’t be hard to tell once they’re in flower. The white widow is probably going to be a breeze. I’ve heard that’s why it’s so popular too. It’s just a hardy rookie strain with good resistance, decent quality and above average yield. A sure investment. The blackberries are lagging behind but I’m sure they will blow the others away in terms of quality. One of the tunas looks great and the other is a stubby runt. The stubby runt I currently have in flower is killing it right now so I’m not writing it off yet. Can’t wait to see if the tuna god produces some nostalgic smells. Tuna strains are still super popular on the Canadian black market. I plucked the first set of leaves that were starting to appear on each plant. These branches almost always turn to larf and they're so small I can't that stressing the plants out at all this early. If anything, the zkittlez and white widows need to slow down a bit anyway. I’ve been doing a shit ton of research over the past year into what causes weed and cigarettes to have black ashes/poor fire holding capacity. Smoking black weed drives me crazy because it’s all the legal and black market have nowadays. The cigar industry has numerous studies on the cause of ash color and burn rate and apparently it has to do with the ratio of mineral content in the soil/water. Soil/water that is high in phosphorus, magnesium, chlorine and other heavy metals will burn poorly and reduce to flaky black ashes. Whereas soil that has higher levels of potassium and calcium carbonate have thick uniform white ashes with no streaks. Calcium carbonate (wood ash, biochar) can also prevent heavy metals in the soil making them unavailable to the plant. I’m discontinuing my “Organic cal mag” as it is full of chlorine which I did not realize when buying it. I’m going to be pretty cheesed if that stuff ruined the burn of my current flowering crop. My dog also found and destroyed my Alaskan fish fertilizer so that’s being discontinued for now too.

UNOS 14 DIÁS DE FLORACION, EMPEZAMOS CON EL BIG BUD, Y NUESTRAS PLANTAS ESTÁN RADIANTES DE ENERGIA

Hey all, These were taken on June 7th and as you can see we have made a lot of progress. They have put on a lot of bud in the last 10 days. Trichomes are thick as you can see in the Pics. They smell pretty strong. Really happy with them. Still just staying with my normal feeding. Will need to start to flush soon. Maybe 2 weeks to go or so!

Hey fellow green thumbs! 🌿💚 We’ve just wrapped up the fifth week of flowering with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. This week has been all about resilience and adaptation as our plants continue to push through the challenges. Let’s dive into the details! 🌟 Week 9 (Fifth Week of Flower) Progress: Day 57-59: Bud Development and Resilience • Auto Fast Pete: Despite the ongoing stress and burned leaves, Pete’s buds are continuing to bulk up. The aroma is rich and potent, filling the grow room with a delightful scent. The resilience of this plant is truly remarkable. 🌿🌸 • Auto Northern Dragon Fuel: Dragon Fuel is also showing strong bud development, with sticky, dense flowers. The burned leaves persist, but the plant’s overall vigor remains impressive. 🌱✨ Day 60-62: Growing with the Flow • Nutrient Strategy: Continuing with the adjusted nutrient regimen, including increased CalMag to support the plants through the stress. Monitoring the plants closely to see how they respond to these adjustments. 🌿 • Reservoir Details: • TDS: 450 • Temperature: 18°C • pH: 6.2 • Environmental Conditions: • Temperature: 31°C • Humidity: 51% Maintaining these conditions to optimize bud development and plant health. 🌡️💧 Day 63: Observing and Embracing the Journey • Auto Fast Pete: The buds are continuing to grow and mature. The plant’s resilience in the face of stress is truly inspiring. 🌿🌼 • Auto Northern Dragon Fuel: The bud sites are dense and sticky, and the plant is showing incredible strength. Despite the burned leaves, the flowers are developing beautifully. 🌱🌟 🌟 Care Tips: • Light: Maintaining the 12/12 light schedule. The plants are adapting to this schedule, and we’re keeping a close eye on their response. 💡 • Autopot System: The Autopot system ensures a steady water supply, reducing the need for frequent manual watering. This system is great for maintaining consistent soil moisture, which is crucial during the flowering phase. 🌊 • Nutrient Monitoring: Continuing with the increased CalMag dose to address deficiencies. Keeping an eye on the reservoir’s TDS and pH levels to ensure the plants receive the right amount of nutrients and minerals. 🌿 • Environment Control: Maintaining a stable temperature of 31°C and humidity around 51% to create the perfect conditions for flowering. Adjusting airflow and positioning to optimize plant health. 🌡️💧 🌟 Genetics Spotlight: Auto Fast Pete: • Characteristics: Rapid bud development, strong structure, early resin production, but showing signs of stress and possible nutrient deficiencies. This strain is still pushing through with impressive bud bulk. • Future Expectations: Continued bud swelling and resin production. Monitoring nutrient adjustments closely to ensure a healthy finish. Auto Northern Dragon Fuel: • Characteristics: Robust structure, dense bud sites, resilience, but also showing stress signs and possible CalMag deficiency. The buds are still developing beautifully. • Future Expectations: Significant bud growth and increased resin production. Close monitoring and adjustments will support a strong finish. 🌍🌿 Fun Fact: Did you know? 🌿✨ Plants are incredibly resilient and can adapt to a variety of stressors. This resilience is especially important during the flowering phase when the plants are focusing their energy on bud production. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week has been particularly challenging and exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Week 9 marks the fifth week of flowering, with both Auto Fast Pete and Auto Northern Dragon Fuel showing remarkable progress despite some stress and deficiencies. The buds are developing beautifully, and with careful monitoring and adjustments, we’re set for a promising harvest. Stay tuned for Week 10, and happy growing! 🌿💚✨ #SuperSativaSeedClub #Week9Report #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT5-DOG 15% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off

Was showing signs of nutrient lockout so decided to start flushing process.. amazing smell but this will be the last ever diary of disco biscuits as she has outstayed her welcome. Not as fat as I’d like her to be but still 2 weeks remaining before chop.

With only very light defoliation this girl is on her way. The smell is pure grape 🍇 on the initial smell that fades to a guava smell on the way out. I really can’t wait to see this one finished.