Likes
Comments
Share
Erste Herbstwoche ist ohne Probleme überstanden. Starker Regen hat die Blüten komplett durchfeuchtet, aber am Folgetag mit Wind und Sonne wieder komplett getrocknet. Unter der Last des Regenwassers haben sich einige Ruten extrem gebogen, aber keine ist gebrochen. Die kräftigen, gut durch Wind trainierten Äste tragen die Dolden💪. Die buds von Larry sind schon schön dick und harzig. AK hat ordentlich zugelegt, obwohl es recht kühl war. Es läuft immernoch erstaunlich gut 👍 bis nächste Woche ✌️
Likes
11
Share
Likes
16
Share
I know it is only two weeks but compared to other auto flower plants during this stage I'm starting to think that all three of my girls are stunted. I did have an issue during week 1. My light wasn't 18 inches as Mars Hydro indicated. I still had my lights height at 24inches.
Likes
26
Share
Que pasa familia, hemos vuelto para actualizar las skunk que ya tenemos cosechadas. Que gran genética, y muy típica entre fumadores de hierba, un crecimiento más indico pero floración lenta bastante lenta, en teoría se supone que es Sativa, 17% thc en la tas con un tamaño medio pequeño pero flores mi compactas y dulces, un cultivo ni fácil ni difícil, sin más, bastante neutral para los cambios climáticos algo sensible con el aspecto alimentación. La recomendaría en verdad, sobre todo para aquellos amantes del dulce. Nos vemos en próximos proyectos fumetillas
Likes
6
Share
@pzwags420
Follow
On week 2 she is putting out much more preflowers. She is stretching for sure but still maintaining excellent node spacing. the average ppfd is 850.
Likes
1
Share
Not long untill we chop these some plants i flipped a little sooner than the rest but everyyhing is on course for a brillant finsh
Likes
4
Share
This Week i let them just continue to grow out of the LST. Last Day of the Week i cut down all the lower branches and defuliated the leaves. First Week of Flower and the Plant shows some nice female Flower-pistols. This Week i started with the Flower Feeding, i gave her about 4 tsp Seabird Guano as Topdress Feeding, it got a NPK of 7-4-5 so not idial for Flower but i guess Perfect for Streching-phase. Please Let me Know if you do Lollipop your Autoflowers ?? i was pretty unsure if i should do it but i was afraid that if i didn't do it it would cause problems cause of the ventilation. Hope you like the Grow so far !
Likes
56
Share
@Growbody
Follow
Hallo und herzlich willkommen zum Ende meines Grows mit der Auto Jack, Jacky White 6th Gen. von Paradise Seeds. Die "Eltern" sind Jacky White x Ruderalis, die "Großeltern" sind Jack Herer und White Widow. Sie ist dadurch eine 75% Sativa mit zitronig-fruchtigen Aromen, genau mein Ding. Es freut mich sehr, das mir die Samen in einer sehr schönen Verpackung freundlicherweise von Paradise Seeds zur Verfügung gestellt wurden. Das war für mich der Ansporn, eine möglichst genaue Beschreibung des Growverlaufs aufzuzeichnen. Die URL des Strains findet ihr hier: https://www.paradise-seeds.com/de/product/auto-jack/ Für diesen Grow verwende ich den 15Liter WideVersion Stofftopf von ROOTiES, die Sonnenerde Bio Hanferde, den BioBizz Wurmhumus, Sonnenerdes Bio Faser, BIONOVA + zamnesias MonsterBud Mix Living Soil, zamnesias Smast Start und Plagrons Seedbooster Plus. Hat sich alles prima bewährt. Tag 106: Mondhöchststand, Ende der Erntezeit, Anfang der Pflanzzeit am Blütetag, ein Optimaler Erntetag. Die Auto Jack, Jacky White 6th Gen. von Paradise Seeds wird geerntet. Letzte Woche habe ich eine kleine Schimmelstelle bei Ihr gefunden, zum Glück wurde es nicht mehr. 160 Gramm Nassgetrimmter Buds sind es geworden. Die liegen jetzt im Keller in DryFerm Bags zum Trocknen. Nächste Woche gibt's mehr Infos. Tag 114: Das ist meine Trichomtrennmaschine. Da kommt aller Verschnitt rein mit ein paar Stängeln. Ich habe ein sehr feinmaschiges Netz gewählt, damit wirklich nur die Trichome durchpassen. Das dauert zwar viele Stunden, aber es ist ein sauberes Ergebnis. Die Maschine hab ich im www gefunden, Man kann den Bauplan für einen 3D-Drucker bekommen oder die fertig gedruckten Teile mit den wichtigsten Schrauben und Metallteilen, außer dem Motor mit Getriebe, dem USB-Spannungsregler und den Gewindestangen, die in jedem Baumarkt zu haben sind. Ja, und eben dem Netz. Da kann jeder seine bevorzugte Maschenweite dazukaufen. Die 3D-Teile haben vor ca. 1 Jahr ~80,- € gekostet, wenn ihr die Adresse braucht, schreibt das in die Kommentare bitte. Das Netz hatte ich glaub 150 Maschen(?) für 10,- €/m², der Schneckengetriebemotor (ohne Plastikteile!) mit dem USB-Spannungsregler haben ~45,- € gekostet. Die 2 Gewindestangen kosteten ~10,- €. Das Ergebnis nach einigen Stunden Sieben könnt Ihr auf den Bildern sehen. Tag 216: Ich habe vergessen die Gläser zu fotografieren, sorry. Es waren mal 3 Gläser a 750ml, ihr seht, es schmeckt mir wirklich sehr gut. Schön, dass du reingeschaut hast. Ich freue mich, dass du dabei warst 👋😎
Likes
60
Share
Hey, it's all normal, I would say, today I removed all the leaves that were dried out or over 60 percent yellow. I'm really looking forward to the harvest, but I already know that the result in terms of quantity won't be my personal highscore, I should have left it in the vegi phase longer but the net is "warned" before the stretch, but I didn't think it was so severe, that was I think the biggest mistake in this grow😏 but well you never stop learning and the next time will be better 😊👌 oh so the trichomes are clear to milky I think 1 week then it is harvest but I want about 30 / 50 have ratio 😱😁
Likes
141
Share
Update 11/04/2022 (Day 57) Hello All! the start of yet another week!! it's been 2 weeks ago since I Flipped to flower but I have a feeling they are really slow in this process. it's only today I really start to see some pistols forming! Since these are my very first Photoperiods i am yet again on unknown territories. Might be that at this stage my TSW2000 just isn't juicy enough. lucky enough I've got a new FC-4800 coming in from Mars hydro. this will have a much better coverage and and some more wattage I might have to do another Lollipopping session once I really see pistols all over the place. The stretch on these girls is crazy at almost an 78CM as of today. I only have +- 80 CM left in my tent and that also means I gotta figure out a way to get my lights up tight against the ceiling and rearrange my extraction fan. 1 plant is kinda on the slow side I accidently topped that one in the early stages and it feels like it never really recovered from that. Having a look at my clones well 4 out of 8 survived and are now starting to develop some nice roots. Thats it for today. hope too see some nice buds forming this week. Update 14/04/2022 (Day 60) Yesterday the new light arrived so I got busy. in order for the new light to be hang as high as possible I had to move the extraction fan outside the tent it now sits on top of the tent. the driver from the light is also placed on top of the tent. I must say this new FC4800 is a very welcoming upgrade it really has a much better coverage in my 4x4 and more wattage :D after the switch I got busy with some scissors to apply a final lollipop session. also transplanted the clones in some bigger pots gotta keep them under the Secret Jardin Tneon 2x55watt lights 6500K till beginning of may than they will be moved to some friends garden.
Likes
30
Share
05/08: seconde semaine de flo. Le premier filet se rempli tranquillement. Et un second est prêt pour aider à supporter le futur poids des buds 😀
Likes
126
Share
@nonick123
Follow
Día 27 (12/02) Sigo con los ajustes de LST, pero voy a empezar a dejar que la planta se empiece a estirar Día 28 (13/02) Hago una ligera defoliación (2 hojas por planta) para mejorar la luz sobre las ramas laterales que están creciendo verticalmente Día 30 (15/02). Riego 1 Litro H20 + Wholly Base 1,5 ml/l + Solid Green 1 ml/l + Rise Up 1,25 ml/l de Gen1:11 TDS 880 PPMs - pH 6,6 (ajuste con pH+ para subirlo desde 6,2 y buscar mejor biodisponibilidad del Calcio) DÍA 32 (17/02) Ajustes de LST. La planta no para de crecer 😍 Mañana pasamos a 12/12 y que empiece el proceso de floración! 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae ️Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1
Likes
18
Share
@Pokan187
Follow
The trichomes on the Runtz are all milky and I'm getting some amber on the sugar leaves, I think the end is near 😁 The G13 is looking great and smelling wonderful, the buds are getting heavier and same for the GDP
Likes
4
Share
@Fyno_TH
Follow
Some strains are hitting their limit—slight nute burn detected. Dialing back the ppm
Likes
20
Share
Starting to keep a close eye on the Trichomes. Still clear some cloudy. Stopped feeding, Starting to flush. It’s starting to smell amazing in here.
Likes
15
Share
Diese Sorte hat bei beiden phenotypen eine sehr Dichte blütenstruktur gehabt. Ich bin von dieser Champion Linie echt überzeugt und freue mich bereits darauf, die nächsten Sorten zu testen. Ich hatte draußen mit Blattläusen und schimmel zu tun. Wegen den Läusen die auf den Trichomen kleben,möchte ich es nicht rauchen.Deswegen friere ich es ein und mache bubble hasch aus den Material.
Likes
2
Share
@GroloCup
Follow
On to another week. She seems happy and the sip container is keeping her watered in her amended soil bed. We're getting to the fun time period for autoflowers so I expect to see a ton of growth in the coming couple weeks!
Likes
13
Share
I want to thank you Paul @New420GuySeeds for this beautiful plant. She's getting close to that time. I'm both excited and a little sad cuz we've done this grow together. Kinda a fucked up reality. Critical 47 has a few lower branches that are starting to drop due to the weight of the bud. I been curious if I could lop off some these baby branches at this stage without consequences.? Anybody know? Maybe sample the bud before the harvest.. would be nice. Ive been doing my best at snapshots of trichomes so I may get a better ETA of the due date. This will be my first ever to harvest anything more than a common cherry tomato. Lol. Any useful advice is welcome, start a chat if ya wanna!! I love company! And hey we already have a shared common interest! Gotta start somewhere. So critical 47 is sticky and smells up the whole house, no deficiencies noticed, growth has stopped as far as I can tell, yet she is still feeding without waste. I changed my regular fertilizer from the fox farm to Dr JimZ. With good results. The fox farm is a great fertilizer as well. I do mix the chicken soup for the soil with the fox farm trio. Cha Ching beastie blooms and open sesame. Dr. JimZ Bloom Kaboom is a once a month application for flowering plants. Good stuff. If I were to grow her again I would, an I would definitely put her in a larger container without the burlap sack. Don't use that crap it's no good. Lol. It's created a protective base under the soil for pests to dwell. I'm sure when I pull it all up there's gonna be a super complexed colony of mighty gnats, I think of some ancient Greece city with all the thrills and shit. Lol. Gnat overlords. My own damn fault. Gnats aren't that bad, they're just eating dead roots. There's definitely worse pests to have in the garden. "Nicole, how do you keep them so dark green?" Easy. I put used coffee grounds into my cannabis plants top soil. If I don't make a tea with it. You can find these helpful recipes @RoyalQueenSeeds with all the good info and instructions. I also make banana brew for my girls, it's rich with everything they need. Helps them grow strong. The coffee grounds help them maintain that healthy green glow (nitrogen). Thanks for stopping by and enjoy the rest of your week. Take care.