Likes
Comments
Share
1st week of flush is done the expected results is the fade, this ladies are coming to the end of their cycle. one more week of just water, I will flush again on 2/1 then let them dry out in the pots for the last week 13. When they are dry I will black out for 48hrs to increase the Trichomes and then the chop. they look to have slowed down in growth from the time-lapse I don't think they will get significantly bigger than they are now. so I hope the flush will help with the smoothness and curing and white ash as a result.
Likes
49
Share
@Roberts
Follow
FBT 2401 is doing great. She got her first lst a few days ago. Looks like the diluted solution worked well. She has started making good progress. Thank you Fast Buds. 🤜🏻🤛🏻🌱🌱🌱
Likes
15
Share
Day 40 of flowering Everything is going well. Now we just have to wait for the buds to mature.
Likes
31
Share
@Cultivate
Follow
Week 8 Looking absolutely huge😂 They’re so tall and wide . Lots of healthy green leaves and strong roots. I was worrying a lot about sex issues as when I did my research I found out they’re quite common to hermaphrodite. Was really worrying but all calyx’s have female signs (so far🙏🏻) so pray for me brothers&sisters.
Likes
63
Share
@Tower84
Follow
🇩🇪 Cherry Limeade – Doja Die Cherry Limeade von Doja entwickelt sich weiterhin hervorragend 🌱. Die Buds legen deutlich an Masse zu und werden von Woche zu Woche größer und kompakter 🌸. Gleichzeitig wird der Geruch immer intensiver 👃. Das Terpenprofil ist aktuell sehr spannend, aber leider nicht ganz das, was ich mir erhofft hatte. Sie riecht spritzig, limettig und leicht sauer, dazu kommt eine Kräuternote 🍋‍🌿. Was bisher allerdings komplett fehlt, ist irgendeine Form von Kirsche oder süßer Cremigkeit 🍒. Ich hoffe wirklich, dass sich diese Aromen im weiteren Verlauf der Blüte noch entwickeln, habe mittlerweile aber meine Zweifel 🤔. Vielleicht überrascht sie mich ja noch – ein paar Wochen bleiben schließlich noch. Woran ich allerdings überhaupt keine Zweifel habe, ist die Potenz, die sich bereits jetzt ankündigt 🔥. Wenn ich vorsichtig an einem Zuckerblatt eines kleinen unteren Buds reibe, kleben die Finger schon ordentlich zusammen 😄. Und das, obwohl wir noch einige Wochen Blüte vor uns haben. Die Harzproduktion scheint also definitiv auf Hochtouren zu laufen ✨. Ansonsten läuft der Grow mittlerweile fast vollständig auf Autopilot 🤖. Ich erhöhe den VPD jetzt leicht von 1,2 auf 1,3 kPa, lasse die Lichtintensität mit durchschnittlich 900 PPFD aber unverändert ☀️. Gleichzeitig habe ich die Umluft etwas erhöht und lasse die Lüfter oben und unten nun auf Stufe 6 laufen 💨. Beim Tensiometer bin ich allerdings weiterhin etwas ratlos 🤔. Ich hatte es letzte Woche nach Herstellerangaben neu platziert und anschließend die vier Blumat-Tropfer entsprechend neu eingestellt 💧. Nach einigen Tagen zeigt mir das Tensiometer nun allerdings trockenere Werte an, als ich aufgrund der Fingerprobe und des tatsächlichen Wasserverbrauchs erwarten würde. Ich habe den Wasserverbrauch deshalb über mehrere Tage genau beobachtet und komme aktuell auf etwa 1,83 Liter pro Tag 🚰. Für die Größe der Pflanze erscheint mir das durchaus realistisch. Deshalb vertraue ich momentan meinem Bauchgefühl und lasse die Einstellungen erst einmal so, wie sie sind 🌱. Hat jemand eine Idee, warum das Tensiometer trockenere Werte anzeigen könnte, obwohl Fingerprobe und Wasserverbrauch eigentlich etwas anderes vermuten lassen? 🤔 Nach diesem Grow werde ich mir auf jeden Fall noch einmal Gedanken darüber machen, wie ich die Bewässerung meines Living Soil Beets weiter optimieren kann 🛠️. Heute gibt es außerdem wieder 3 Liter Almicanna Flower Komposttee 🌸. Diesen habe ich 48 Stunden gebraut und werde ihn jetzt ins Beet geben 🫧. Ansonsten heißt es weiterhin: möglichst wenig eingreifen und einfach zuschauen, wie die Cherry Limeade ihre Buds aufbaut 😎🌸. Ich bin sehr gespannt, was in den nächsten Wochen noch aus ihr herauskommt 🚀. 📊 Parameter der letzten Woche: 💡 Licht: 900 PPFD / DLI 39 (12/12, Stufe 6, 40 cm Abstand) 🌡️ Temperatur: 28 °C 💧 Luftfeuchtigkeit: 67 % 📈 VPD: 1,2 kPa → 1,3 kPa 🌿 CO₂: Ø 740 ppm 💦 Bodenfeuchtigkeit: 120 mbar 🇬🇧 Cherry Limeade – Doja The Cherry Limeade by Doja continues to develop exceptionally well 🌱. The buds are noticeably putting on weight and becoming larger and denser with every week 🌸. At the same time, the aroma is getting stronger and stronger 👃. The terpene profile is currently very interesting, although unfortunately not quite what I was hoping for. She smells zesty, limey and slightly sour, with a herbal note 🍋‍🌿. What is completely missing so far, however, is any hint of cherry or sweet creaminess 🍒. I’m really hoping these aromas will develop later in flower, but at this point I have my doubts 🤔. Maybe she’ll still surprise me – there are still a few weeks to go. One thing I have absolutely no doubts about is the potency that already seems to be developing 🔥. When I gently rub one of the sugar leaves on a small lower bud, my fingers already get very sticky 😄. And we still have several weeks of flowering ahead. Resin production is clearly running at full speed ✨. Apart from that, the grow is basically running on autopilot 🤖. I’m now slightly increasing the VPD from 1.2 to 1.3 kPa, while keeping the light intensity at an average of 900 PPFD ☀️. I’ve also increased the airflow slightly and both the upper and lower fans are now running at Level 6 💨. I’m still a little puzzled by the tensiometer, though 🤔. Last week I repositioned it according to the manufacturer’s instructions and then recalibrated the four Blumat drippers accordingly 💧. After a few days, however, the tensiometer is now showing drier conditions than I would expect based on the finger test and the actual water consumption. I’ve therefore monitored the plant’s water consumption over several days and I’m currently averaging around 1.83 liters per day 🚰. For a plant of this size, that seems quite realistic to me. So for now, I’m trusting my gut feeling and leaving the settings as they are 🌱. Does anyone have an idea why the tensiometer could be showing drier conditions even though the finger test and water consumption suggest otherwise? 🤔 After this grow, I’ll definitely take some time to think about how I can further optimize the irrigation system in my Living Soil bed 🛠️. Today I’ll also be giving her another 3 liters of Almicanna Flower Compost Tea 🌸. I brewed it for 48 hours and will now apply it to the bed 🫧. Other than that, it’s mostly about staying out of the way and watching the Cherry Limeade build those buds 😎🌸. I’m very curious to see what she can produce over the next few weeks 🚀. 📊 Parameters from last week: 💡 Light: 900 PPFD / DLI 39 (12/12, Level 6, 40 cm distance) 🌡️ Temperature: 28 °C 💧 Humidity: 67% 📈 VPD: 1.2 kPa → 1.3 kPa 🌿 CO₂: Avg. 740 ppm 💦 Soil moisture: 120 mbar
Likes
13
Share
@Highguyz
Follow
Going too switch plants too a 48x48x80 with two full spectrum 1000 watt defoliated last night
Likes
5
Share
Day 60 for naughty OG. Showing some colours on the top nugs. The temp is getting real now at some nights, but doesn’t bother this girl. She’s starting to show some booty and they are dense. Giving here some filthy nutes this week to get those nugs ripping. Real happy with her and looking forward to rap her in a joint
Likes
17
Share
Topped last week plants are growing vigorous Day 58 is today 06/01/21 today I topped dressed with 4-4-4 and earthworm castings and continue to lst plants
Likes
18
Share
4/8 frosting up more and more and buds plumping up but not much. I feel its key to note that ine of the plants is more short stocky and the other has greater internodal spacing
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/15/22 😻Week 5 of veg and things are looking good! I didn't know how I wanted to train these so my husband's suggested we top 2 plants and low-stress the other 2.. I went a little too heavy with their last feeding, no burned tips yet but 2 of them are very dark, we'll be doing water only for these this week..there is some minor discoloration on a couple of the lower leaves nothing major but something we're watching..we'll update again midweek..thanks for all the love Growmies ❤️🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/18/22 Things are good 😺👌..New growth seems to be coming in fast on the 2 plants we topped...much faster growth than we've seen up to this point..all plants seem happy and all have a great color (after working out my slight overfeeding )..we've been running the MarsHydro near the top of the tent the entire grow as a test and its still more than adequate. .we don't have a light meter but we do have some crazy tight node spacing to confirm lol...I still say these plants are a little on the small side but they seem to be growing faster now..I'm pretty sure leaving them rootbound in cups didn't help their development...I think they're finally becoming adjusted to their new homes and we'll see some explosive growth in the coming week 💡🌱... fingers crossed 😺🤞 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 01/19/22 AHHHHHH!!! I DID IT AGAIN!! Kicked my timer power after watering yesterday and put these into about 14hrs of darkness 😥.. lights are back on, hopefully they didn't notice lol.. ah well these things happen and I'm sure they'll be just fine ❤️🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
12
Share
@ciansta
Follow
I’m going to leave the seedlings in the small brown pots until their 1st node and then I’ll transfer them into bigger plastic 3.5gal pots with 80/20 soil to perlite potting mix. One Dosidos is looking a bit behind and the one with the weird leaves ended up catching up to the Northern Lights, maybe even growing faster than it. All Dosidos’ ended up dying but one and I’m sure it’s on the way out. Northern Lights has had no issues and growing perfect.
Likes
25
Share
@Chubbs
Follow
2025 Fastbuds GreenHouseGrow has come to an end. Its been an absolute roller coaster of a grow. So cool to watch them grow from sprouts to absolute giants around 8ft tall. They're a great and easy strain to grow and I could only imagine having them in bigger pots how much bigger they could get. I ended up harvesting them for fresh frozen and immediately put them into the deep freezer after trimming everything that didn't have trichs on it. Excited to do some bubble wash and make FreshFrozen and drysift Rosin/Hash. All in all highly recommended and Happy Growing.
Likes
12
Share
@BlaKX
Follow
Ai Gude Growmies, Alter Tobi (NL auto)🧓🏼🌌: 5.6= 21cm 8.6=29cm +8cm Canna Terra Vega Gorilla Punch Auto 🦍👊🏻🚗: 5.6= 20,5cm 8.6= 25cm +4,5 cm Canna Terra Flores / Canna Boost Mimosa Cake Auto🍹🍰🚗: 5.6= 23cm 8.6= 30cm +7cm Canna Terra Vega Habe mich gegen das Toppen entschieden da es noch mehr Stress bedeuten würde und ich beim ersten mal Autoflower Genetik lieber auf Nummer sicher gehen wollte da. Endlich bin ich auch wieder im Wochen takt das es immer Sonntags die neue Woche hochladen kann. Fangen wir beim Alten Tobi an dem Sorgenkind nachdem Blatt Schaden fing er an sehr gezackte und verformte Blätter zu entwickeln. Natürlich ist der Punkt das die Erde am anfang zu trocken war und ich tauchen musste um die Erde richtig zu wässern. Denke der ganze Stress ist daran schuld und ein Teil die Genetik weil die anderen 2 haben sich wie ich empfinde gut entwickelt. Oder meint ihr die Pilze wo im Topf wachsen haben damit was zu tun was ich mir nicht vorstellen kann oder ? Die GPA wächst sehr gut in die Breite und entwickelt massive stabile Seitentriebe. Sie ist den anderen geschätzte 5-7 Tage voraus. Hatte gehofft das sie mehr in die Höhe schießt da die anderen ihr 5cm voraus sind. Werde wahrscheinlich einfach sie. Höher setzen das sie mit den anderen gleich hoch ist. Sie hat als einzige schon Blüte Dünger und Booster bekommen vor 2 Tagen seitdem explodiert sie förmlich🤯 Zu guter letzt die MCA sie hat die trocken und wässer Phase gut überstanden. Leider hätte ich den Vega Dünger nicht erhöhen müssen da sie jetzt leichte Adlerkrallen hat. Ansonsten habe ich sie nur entlaubt da für LST die Triebe noch wachsen müssen und sie ist nicht so Dicht verzweigt ist denke ich geht es ohne solange an alle Triebe ausreichend Licht fällt. Da ab jetzt bei allen definitiv die Blüte beginnt habe ich vor 2 tagen die ADlite Red-55 (660nm Deep Red 55w) zugeschaltet und die Haupt-Lampe von 60% (400w) auf 80% (520w) geschaltet da es endlich die Temperaturen wieder zu lassen. Die 2 anderen Pflanzen sind Fettkraut Pinguicula spec. "Guatemala" meine natürliche Insekten Falle. Diese Art ist sehr robust und kann auch mit Kalk haltigen Wasser gegossen werden.
Likes
Comments
Share
@RCUgrows
Follow
Seeds are still not ready yet. Probably need about another 2 weeks
Likes
1
Share
Up on Melancholy Hill There's a plastic tree Are you here with me? Just looking out on the day Of another dream Well you can't get what you want But you can get me So let's set out to sea, love 'Cause you are my medicine When you're close to me 🍊
Likes
15
Share
Einen wunderschönen guten Tag wünsche ich euch, liebe Growfreunde 🤗😊 Hab diese Woche den entfeuchter angemacht und auf 60% gestellt damit die luftfeuchtigkeit bissl runter geht. Am Dienstag hab ich auf 12/12 gestellt, da die Lemon Shining Silver Haze nen ganz schönen schub gemacht hat und die Runtz auch😁😁😁😁. Zuvor hab ich alle etwas entlaubt und paar unnütze Triebe entfernt. Haze: ca.50cm momentan Runtz: 45cm Green Gelato: ca 40 Sweet ZZ: ca. 40cm die Peyote Critical hat gan schön aufgeholt: ca.40cm💪💪 und die Gorilla Zkittlez hinkt hinterher mit etwas über 20cm. Ich hoffe auf min. 100% stretch bei den großen und vllt 150% bei der Gorilla Zkittlez. Naja, die Hoffnung stirbt ja bekanntlich zuletzt
Likes
53
Share
Harvested at the first sign of amber, could have gone longer. I will be running a full tent of these in a few weeks so look out for that grow. Considering these ladies were all five in a 40l pot, I am pretty happy with how they turned out. My intention was to LST them away from each other to give them room, but unfortunately a combination of moving house and lack of space meant that plant didn't happen, so they were certainly restricting each other light. I am really very excited to give them a proper focused grow in the upcoming series. I will add more to this when I fill in the smoke report.
Likes
15
Share
Week 2 has gone just as well as I'd like it too! I had an accident during the week where I had dropped a sticky bug trap on one of my girls, this led to me accidentally ripping off a fan leaf and a half, but she seems to have come out of it just fine! (Thankfully). I have been feeding 1/3 strength nutes the past few feeds, stepping it up from 1/4. I will be watering until I see runoff from now on to prevent nutrients from building up in the coco. Update(day 15, 4/12/20) Today I purchased a new oscillating fan, co2 bags and a new hygrometer that hooks up to my phone and shows me stats. The girls have been putting in a lot of work over the past 24 hours. I also had a Purple Punch photo seed sprout today which I may be turning into a mother plant. I will be starting a diary for this girl too. Update (Day 16 5/12/20) Second purple punch photo popped today, going to keep 1 inside and give the other to my mom to take care of. The girls got their first 1/4 dose of calmag today fed at 6ph due to all the nutrients settling there.( I do have ph +/- but I'm going to try run this whole grow at 5.8-6.2. Update (Day 17 6/12/20) Plants seem happy today. Fan leaves producing a the pre-existing nodes are starting to shoot out quite rapidly. Unfortunately, my streets power went out today for ~90 minutes, I opened the tent, windows and doors to get any light in I could, thankfully the power came back on shortly after. I fed the girls today with very little run-off(I'm trying to perfect the amount of water they need). Update (Day 18 7/12/20) The girls have jumped up over night! I wont be feeding today as I'd like the coco to dry out quite a bit more. Update (Day 19 8/12/20 Gave the girls a small feed today with very little run-off Everything seems to be going well so far, I'm very thankful! Update (day 20 9/12/20) Everything is going pretty well today. I will not be feeding as the increased humidity has kept the coco more moist than usual. Will be feeding full strength nutes tomorrow! Thanks for stopping by, HMU with any questions or tips you have.
Likes
7
Share
@LACREME
Follow
Primeira semana de planta, por enquanto um broto. Germinei no papel toalha + ziplock, e depois passei para o cultilene. Assim que a raíz cresceu, como mostra no vídeo, passei para o Kokostec. Na primeira rega utilizei ppm 340 e pH 6 e os produtos listados acima. A ideia nesse ciclo é fazer um cultivo em coco, misturando a linha FloraSeries da GH com ferts KNF caseiros. Qualquer critica e/ou sugestão, fico a disposição. Siga-me no Instagram, @LACREME710