ALRIGHTY THEN 👉THEY ARE READY , BUT IM JUST GONNA GIVE IT MORE TI E TO AMBER UP👈 We just hit week 13 and all is well , have to admit shes just killing it on the resin development 😃 ......the frost is insane 👹...... Just waiting for her to ripen up👈 👉NutriNPK NUTRIENTS USED FOR FEEDING👈 www.nutrinpk.com Lights being readjusted and chart updated .........👍 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO CHECK OUT MY DIARIES 👈

unfortunatly the weather changed and temperature outside dropped down to 12 degrees celsius. It had a big impact on my plants. One plant after another wilted and i tossed 28 of them. The substrate is also to wet and maybe it was to often recycled. Only 42 plants left and only some really look healthy like they should. I have to start again with new seeds to fill may table. I am so angry about the wasted time.

So far so good... couple plants are a bit behind others even though all germenated at the same time. It looks like 3of them are a week behind... but oh well, they are all still looking very healthy although in the photos they look very yellow but this is because of the light. There actually a very dark green colour. I've started to add top max now as they have 2- 3weeks left help them buds grow. The heatwave has finally stopped after 2weeks of it being nearly 40degrees by 10 am everyday . So plants seem a bit happier... Been really happy with this strain and will defo grow again. Only thing i might change is not putting as many plants in at once. Yeh 6 fit and I could fit another 2 or 3 in but the awkwardness of watering and checking for bugs or nutrient problems is a pain... There so bushy can't tell which plant is which... Update... New pics Height.. 73cm

8/10 - Got around 50g per plant, very frosty and compact too for an autoflower. Wanted to share the final product and the whole journey in once. Hope you like it. BTW: why can i only make one harvest when i dont harvest all the same time? And ive seen others be able to harvest week after week. Peace & Love

This is the last day of her life. Shes getting a bath of sun with 40c outside. After she will finish in the dark until i harvest her tomorrow Shes trying to get pollinated by throwing some new pistils here and there, but trichomes are cloudy mostly with amber tone. Not a lot of clear one.

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

This is now in my top 10 autos very happy with the outcome!!! Smells amazing very nice I’m over the moon

Start of week 4 Fed w nutrients 7/11/25 Watered 7/13 Fed with nutrients 7/16

Buds are getting denser, stickier and stinkier this week. Defoliated a few leaves from each plant throughout the week. Watered every 2 days with a 1/4 gallon to each. They got a mild compost tea beginning of the week to boost the microbial life and their final top dress towards the end of the week. Aerated Compost Tea Recipe (24 hour brew) 2 gallons rain water 2 cups Coast of Maine Lobster Compost 3 tablespoons GS Plant Foods Fish & Kelp 3 tablespoons EWC 1 tablespoon kelp meal 1 tablespoon azomite 2 tablespoons molasses Top Dress per 3 gallon container 3 tablespoons Dr Earth Flower Girl 1 tablespoon Down to Earth All Purpose 1/2 tablespoon Down to Earth crab meal 1/4 cup EWC Day 43 - watered with 50/50 mix of compost tea and rain water pH 6.0 Day 45 - plain rain water pH 6.4 Day 47 - top dress and plain rain water pH 6.4 Day 49 - rain water w/ Recharge @ 1 tsp per gallon and Natural Wet @ 1 tbsp per gallon pH 6.5 StayWeeded ✌️

Tutto ok, piante sane e spettacolari.

It taken a while for these girls to start to stretch but I think they're about to take off.i would love some advice from anyone who has grown these strains.

ran out of stepwell bloom top dressing but this one is so close to ending that it does not need to be amended with anything other than a small power bloom top off. This one is between 10 and 14 days away from being done. just loving the smell. ive tried this cultivar grown outdoors and now i will get to try it from an indoor grow. Can't wait.

this is the end again! the 2 ladys gave me some big buds which i really liked and for the rest of the plant i will probably turn it into rosin and fill it into vapes or for some rosin for joints else this grow was really easy to handle! 😎

Flipped to 12/12 on a full moon 8th August 2025…I should see some flowers within the week I will also start her PK organic liquid nutrients.

had a bit of a nightmare. bit much on over water and may have had a nutrient lockout. took one sweet cherry pie out and replaced with seedsman northern lights auto. also added a few more of those in the tent 5th dec. was unfortunate as this week was for topping. went ahead and did it. will be very careful next week. Purple berry Kush came on strong this week. took the nutrients fine. less damage from over water.

Que pasa familia, vamos con la tercera semana de vida de estas Wedding Cheesecake Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 🙏. El ph se controla en 6.2 , la temperatura la tenemos entre 21/24 grados y la humedad ronda el 50%. Esta semana realicé el trasplante a maceta definitiva, iremos viendo cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

🍓🍌 No trainin No toppin Jus test run

Hier is het kweekverslag voor week 1 van de bloeifase van je American Patriot planten van Weedseedsexpress. Deze overgangsweek luidt het begin van de bloei in. Je kweekt nog steeds met een Mars Hydro 450W LED, 11-liter potten en potgrond. --- 🌸 Kweekverslag – American Patriot (Weedseedsexpress) 📅 Week 6 totaal / Week 1 Bloei Fase: Overgang van groei naar bloei Lichtschema: 12/12 Verlichting: Mars Hydro 450W LED Potmaat: 11 liter Medium: Potgrond Temperatuur: 24–26°C (dag) / 18–21°C (nacht) Luchtvochtigheid: 45–50% Afstand lamp – top: ±30–35 cm --- 🔄 Veranderingen deze week: Lichtcyclus aangepast van 18/6 naar 12/12 Planten reageren zichtbaar: internodale stretch gestart Eerste bloeiverschijnselen zichtbaar (witte haartjes bij topjes) --- 🌿 Structuur & Groei: Hoogte explosief: +5–10 cm sinds begin week Planten worden slanker, maar strekken krachtig omhoog Takken verstevigen zich vanzelf — geen ondersteuning nodig (nog) Toppen beginnen zich te vormen (voorbloei) --- 💧 Water & Voeding: Watergift: ±1.5 liter per plant, 2–3 keer per week pH: 6.3 Voeding aangepast voor bloei: Bio-Bloom: 1 ml/L Bio-Grow: 0.5–1 ml/L (voor ondersteuning groei) Top Max (optioneel): 0.5 ml/L (voor bloeistimulatie) --- Observaties: Geur: Licht toegenomen, kruidig en zoet Bladeren: Gezond donkergroen Geen tekorten zichtbaar – blad licht glanzend, steng