Likes
Comments
Share
@Luxengrow
Follow
Growing nicely, in preparation for flipping amended in this week: - kelp meal - malted barley - gypsum - basalt - neem meal - silica & covered with small amount of homemade compos
Processing
Likes
Comments
Share
Theyve both reacted well to their topping and fimming and are really starting to take it in their stride. Its been a little cold in my room this week so recovery was a little slow at first but all seems well now. The cheese is starting to bush out and im really looking forward tonall the new tops coming through!
Likes
23
Share
A couple days before chopping. Spotted budrot at 2 spots in the New 2. So almost time to cut before it get worse. The rest is doing fine, New 1 and Strawberry are gonna be the first ones to get chopped together,branches are under load and some are bending down
Likes
23
Share
06/04: Début 3ème semaine jusqu'à présent je suis content de moi, c'est ma deuxième culture. La première a été assez mouvementée et cette fois-ci je me sent plus à l'aise par rapport aux arrosages par exemple. J'ai choisi de ne pas utiliser du allmix par exemple pour pas risquer de brûler mon plant lors de l'engraissâge etc. 06/05: Aujourd'hui "tie down" des branches les plus basses. (LST j 0) + Arrosage à l'eau clair 400ml ainsi que toping des branches basses. 06/06: j'aperçois les premiers pistils la phase de pré-flo est sur le points de débuter je vais augmenter la luminosité petit à petit dans les jours qui viennent pour arriver autour des 70,000Lux en phase de flo. 06/07: je vais revoir mon planing d'engraissage et ajouter un engrais de flo. et du CalMag agent toutes les deux semaines, quand au GHE essential une fois par semaine en foliaire. 06/08: le filet est placé depuis ce matin, maintenant on attends l'étirement floral pour le remplir. 06/09: arrosage +/-500ml avec engrais, j'ai tenté de descendre le filet pour palliser le plant et commencer à diriger le branche dans les trous du filet mais j'ai changé d'avis car je le sentais pas, je préfère attendre le stretch et utiliser le filet quand les branches l'atteindront naturellement. 06/10: finalement j'ai fait un topping hiers soir car le fiming ne semblait pas prendre et le cola continuais a monter et a chaque nouveau noeud j'avais chaque fois que deux branche donc j'ai préferer le topping certaine branche latérale on déjà rejoint la hauteur de deux branche obtenue grâce au topping. je suis étonnée par la vigueur de cette variété qui se remet rapidement de tout stress!
Likes
166
Share
@Wicket
Follow
I don't think much more will happen in case of Bud thiccness, just getting more ripe. But i hope im wrong, wouldn't mind if they get a little bit more swollen. Since im Colorblind i can't say for sure, but i think RG #1 is turning kinda Purple? RG #2 has still the biggest buds and starts to fade now. There are still a lot of white pistils and Trichomes are also not ready yet, still not milky and i surely want some amber in it also. So i guess at least another 2 weeks, mostly 3. Don't want to harvest them too early, they should have the time to get ready. This week they also got again 10ml of Bio PK, next week will be the last time, then only water for 2 weeks. So see you next week then! :)
Likes
6
Share
Finally we are done, I spent one 10 months on Durban Poison, this is my best sativa strain and im absolutely in love. So next report will be with some Clones of Durban Poison.
Likes
7
Share
@ibbzy
Follow
Ahhhhhhh such beauties! And they’re starting to frost uppppp 😍 Will update with a few more shots in few days
Likes
16
Share
@peggyo
Follow
Going into Harvest with 2 of the plants next week, flush started - these are more Indica - Tri's are mixed cloud and clear. Other 3 plants are clear and getting 1000ppm nutes still.
Likes
10
Share
@BodyByVio
Follow
This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless
Likes
5
Share
Yooo what’s up! Today marks Day 2 of Week 5 in flower and maaaan, things are coming along perfectly. The aromas right now are on a whole different level – every time I open the tent it’s like getting hit with a wave of dank fruity funk. Buds are stacking up beautifully, trichomes are starting to glisten, and the structure is lookin' solid. Only thing I’m wishin' I did different is spreading her out a bit more or doing a bit of defoliation earlier. She’s packed in and some of those lowers aren't getting all the love they could be. But hey – lesson learned for next run: don’t get greedy with the amount of tops! Quality over quantity, always. Gonna aim for a cleaner canopy next time, fewer but fatter colas. For now, I’m keeping the feed around 1000 PPMs, just to keep things steady without overdoing it. She seems happy, leaves are praying, and everything’s right on track. Let’s gooo! 💨🌱🔥
Likes
9
Share
Watering Challenges: Due to high humidity, the soil took an entire week to dry out. Overwatering last week slowed water uptake but was mitigated by maintaining a higher nutrient level, preventing deficiencies. Nutrient Status: Signs of nutrient burn have not worsened. The plant is now showing early signs of hunger, with lighter zones forming on the leaves. Growth Observations: The plant responded well to topping, rapidly producing longer side branches. Growth remains vigorous, with a well-developed structure. Next Steps: Transplanting and watering are planned for early next week to support the plant's increasing nutrient demands. Summary: Week 4 revealed a learning curve in managing high humidity, but the plant's resilience and strong growth highlight its adaptability. Topping was highly effective, and the plant is thriving. dein-onlineheadshop.de/ Use my referral code 420Shop at checkout to get a discount on your purchase. By using this code, you also support me, as I receive a small reward for each use. Thank you for your support!
Likes
10
Share
Ppm spike this week read around 2700 Topped up with fresh water Still learning will do things a little different next time Her height seems to have maxed out Room temp still an issue high 33 deg cel day temps lately .
Likes
2
Share
@gdogfunk
Follow
Another week closer to harvest! She’s looking and smelling amazing!! I can’t wait to smoke this delicious plant. I grew her once when I first started indoor, so I’m excited to feel the Swiss cheese stone!!
Likes
48
Share
[Day 10] 7/07/21 periodically playing various music and nature sounds, adding more crystals and just watching the plants grow...👽 [Day 11] 7/09/21 lowered the lights from 30" to 24" - 21,000 lux [Day 12] 7/10/21 lowered the lights from 24" to 14" - 35,000 lux
Likes
56
Share
Heading into week 8. Estimating about 10 days til harvest. Have 4 very different phenoms. Starting to really stink. Grow area smells like skunky grape gobstoppers. Can't wait to taste these ladies. Was gone for 3 days this week and came back to perfectly happy ladies. Best part of growing with LEDs. Can leave with little to no worries. Happy growing all!!!!!!
Processing
Likes
55
Share
@Max1973
Follow
Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm