HARVEST DAY! 162 days after the sprout, and 117 days after the switch. It makes almost 6 months!! What a never-ending journey! I chopped down the princess and decided to place the colas on the usual hanging net without trimming them directly. I just couldn't. Every cola requires at least 30-40 mins to be trimmed properly. I got something like 50 or 60 colas in total. It's a total pain in the ass believe me!!! There are layers consisting in calyx, leaf, calyx, leaf, and so on. You basically need to work between every couple of small calyxes in order to remove the leaf in the middle, while being very careful to not cut down everything. It's insane!!!!!! So.... just wait a little more for the final harvest and the smoke report. They will come, but definitely not now! In the meantime I uploaded some harvest photos and videos. ;-) See you soon!!!

Jour52 arrosage avec 2 litres d'eau ph6.3

Great week, this is one of the best growth I've worked on. I'm watering everyday about 0,75L per plant and add 3 days a week nutrients. I'll increase to 3ml/L of Terra Bloom from now on.

Auto Moon Rock is growing great. She had a slow start, but is making progress now. She sprouted her first pistils today ot yesterday. She got some lst and selective defoliation done. She is looking good. Thank you Medic Grow, and Divine Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

High humidity and high temperature variation can cause mold and mildew. Healthy plant and high ventilation prevent the problem!

April 18: Thank you MSNL seeds for the package i germinated as soon they got here 😄 So i start with 2 strains in my small tent, then when the 4x4 is free i will pump it full too with all of these for a few crops, cheers April 23: they both above ground now April 20: the seeds have roots and are now planted in 2 liter pots

After 72 hours of darkness, the RS11 x HOLLYWOOD was hung in the drying tent at 55–60% humidity.

Only giving plain water from now on. Smaller plant has little bit of mold. Not much, but after rain it might spread, so I am probably harvesting it within a week since there are couple rainy days ahead. . Days are warm and dry and still very long, so that inhibits the mold from spreading too fast so I am not to worried. Buds appear fluffy and leafy but there is good amount of cannabinoids so I think it'll be fine and since this is not for sale but for my personal use, the form of the buds doesn't matter so much. Happy grows to everyone.

Germinated in paper towel and then in soil prepared 24 hours before just with water. I decided to do outdoor cause temperature now is good but i m not sure is going to be hot enough for all the month.

What up fam, weekly update one these lovely girls. They're doing ok, especially for only getting calmag and Ph'd well water up to this point. I'll introduce Bloom nutes this coming week as it looks like this will be the last week of Veg. Next the preflower stretch begins. All in all Happy Growing.

soo one was way more photogenic than the other 😅 also I know I put a lot of videos but I'm obsessed with this strain ok? it's amazing and I'm proud of me😁😁 oh and how DOPE is the timelapse? 🤯🔥🔥🔥🔥

I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!

One more week of feeding then flush. Will give more detail in each tester diary in their harvest week. This girl is about 2 weeks away.

Another easy auto to grow looks like she’s gonna come out amazing When dried let’s see how it goes!!!

Plant at the front #3 has had slowed growth but buds are filling out pretty well now, pretty sure she is a Orange sherbet. Back 2 are on week 3 day 17!!! & Are going Awesome, buds stacking up & down every branch! Going to get some really good Cola's of them! They are loving the 730watts!’ of light, back left plant looks like a Tropicana Cookies, going to do some defoliation on her & tie branches down a bit to open up middle of plant to allow more light & air to lower bud sites.

Me costó adaptarme a la cantidad de agua que necesitaba, prácticamente 1.5 litros todos los días. Temperatura 23-25 centígrados, HR 45%. Me pueden contactar por ig @federicocabreraf , por si quieren saber mas detalles o algún comentario que me quieran hacer, paz.

Welcome to Auto Alaskan Purple Grow by PoshGrow! 🍀 Week #4 2020 August 13th - 20th. General Info: When planted: 2020 July 23th. Week: 4 Days: 21 - 28 Last Update Day: 2020 August 18th. Plants: 5 Alaskan Purple Auto. Equipment: Tent: MarsHydro 1mx1mx2m or 39"x39"x72". Light: HLG 260w V2 Rspec QB Kit. Exhaust: 4" 322 CFM fan + Viper Carbon Filter. Intake: 4" 100 CFM Inline Fan. Oscillating Fan: Lower: 4" Ram Fan. Upper: 16" Oscillating Ram Fan. Humidifier: Taotronics TT-AH001. Dehumidifier: Pavlit MD750. Soil: NPK soil 40% Compost, 50% Peat Moss, 10% Agroperlite. Pot: 7 gallon Fabric Pot x 5pcs. Nutriens: Fox Farm Trio. PH Correcton: Chemoform pH-Minus Granulat. PH Pen: Cheap Chinese one, I callibrate it every time I use it. Water pump: Digital microscope: Comment:

The plants are now in the bulk phase. It seems to be a very stable strain, as the growth pattern and aroma are almost identical to the previous plant of the same strain. I'm gradually lowering the EC as the leaves on #2 starting to show little burnings. VPD around 1.4–1.6 The light hits the plants with around 900 PPFD.