Likes
Comments
Share
Aug 30: it’s still hot (too hot at peak for photosynthesis) so lots of water, watering outside of growbag, etc to cool things off a bit. Sep 1: almost ready. Found a dried leaf and a spot of bud rot which was immediately removed. Main tops are almost ready and I’ll start harvesting this one later this week. Sep 2: buds are looking pretty ready (at least the tops) and the pistils changed colour last night. Heatwave is now past and now we’re into a couple days of smoke from fires in the NWT. Sucks, but at least this is the first serious smoke here this year. Sep 4: decided to do a chemical flush this year. Great buds last year but didn’t burn well because of excess P in late flowering. Considered another flush product but looking at the MSDS sheets that stuff had ‘editic acid’ which is an obscure but acceptable name for EDTA. That is a very strong chelating agent which will remove salts effectively but I’d rather avoid it. In contrast, Final Flush from Grotek has potassium sorbate (generally recognized as safe food additive) and good old citric acid which is a chelating agent but not as strong as EDTA. Similar products but citric acid is more gentle and the plant still gets some potassium. Sep 5: don’t take flash pics of photoperiod plants unless you follow up with a far red light.
Likes
2
Share
@Enki_Weed
Follow
Dienstag war ein großer Tag für meine Pflanze – sie ist jetzt offiziell im Blüte-Modus! Das bedeutet eine Umstellung auf den 12 Stunden Licht- und 12 Stunden Dunkelheit-Rhythmus. Kurz davor habe ich sie noch entlaubt, um sie auf diese wichtige Phase vorzubereiten. Auch die Wasserzufuhr habe ich angepasst, sie entspricht jetzt den Empfehlungen für die zweite Blütewoche. Zum Glück ist das Problem mit dem pH-Wert endlich Vergangenheit. Das hat mir wirklich Kopfzerbrechen bereitet, aber jetzt scheint alles stabil zu sein. Das aktuelle Sorgenkind ist allerdings die Luftfeuchtigkeit. Sie ist momentan leider viel zu hoch, und ich muss mir überlegen, wie ich das am besten in den Griff bekomme. Das ist jetzt meine nächste große Herausforderung.
Likes
Comments
Share
6. Woche So langsam legt sie mit dem Stretch für die Bloom los. Jetzt wirds in nächster Zeit interessant zu Beobachten, wie sie sich entwickeln wird. Auf das Training hat sie gut reagiert und jetzt darf sie sich die Zeit für die Bloom nehmen 😊
Likes
10
Share
The buds are really getting fat on this little CBD monster did not expect that. She will be small but heavy
Likes
38
Share
@wolfvb
Follow
🌿 Week 5 Update: Breaking Dominance & Structural Shaping Grow Environment & Conditions Light Cycle: 18/6 Training Method: LST (Low Stress Training) Pest Control: Active monitoring via yellow sticky cards (No current infestations noted). Weekly Observations & Actions This week was all about manipulating the architecture of the plant. I’ve officially moved into the vegetative training phase to increase my final yield potential. LST Execution: I’ve applied 90° LST clips to the main terminal. By pinning the main apex down, I am successfully redistributing auxins (growth hormones) to the lower lateral branches. Stem Health: The main stalk is showing great flexibility. No "knuckling" or stress fractures observed at the bend site. Growth Response: Within 24 hours of clipping, the secondary nodes began turning upward toward the light source, confirming the break in apical dominance. Root Zone: Maintaining consistent moisture levels. The plant is currently housed in a smaller starter pot nested within the main container I’m keeping an eye on root-bound signals before the final stage. Nutrient & Water Log Feeding: Continuing with the base veg formula. pH Level: Stable at 5.8 – 6.0 (Targeting the sweet spot for coco). Runoff: Minimal, ensuring no salt buildup in the early stages. The "Kewpie" Guard 👶 The garden guardians are keeping a close watch. They seem to be providing +5 to "Vibe Stats."
Processing
Likes
11
Share
@Crwfz1
Follow
Lots of training on all the girls this week all original sensible two gorilla glue one is the biggest under scrog already ghost is right behind then going to lay the last babby gorrilla across light range stay tuned
Likes
11
Share
15.08 Second week going great. The mimosa pheno I hunted is a true monster. Thick stem already nearly as big as the 1.5 inch rockwool cube. Easily over 1 m high. Stacking beautifully. I have a new setup for the 5x5 tent. Vevor EC fan 150mm. With temp and humidity controller paired with prima clima 900m3h carbocone filter which is huge. Also new Mars hydro fc e 8000 light with Bluetooth controller. So far very cool. We will see how it performs. Since I have co2 boosted we will have it cranking at max when the girls hit the bulk phase.
Likes
32
Share
@S_V_F_O
Follow
in ppm 800 ph 7,5 out ppm 2000 ph 5,7 Pots 40cm Satori 50cm Blueberry 35cm Height from floor to light source 1m 25cm
Likes
2
Share
@Ninjabuds
Follow
It’s day 33’from seed. All of the plants are really healthy. The plants have a really great root system at this point… I am currently slowly moving the light intensity up to the veg area. Now that are in a groove they are about to explode… I’m hoping I can flip the plants to flower in 1 weeks but I’m thinking I will wait to weeks and let them get a little larger. The plants are just now starting to look visually different next weeks update I will be ababoe to go into the visual differences, they are just not that extreme yet to really talk to much about.
Likes
18
Share
week intel: everything is perfect! stresses : just a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 818 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 382 ppm - 0.7 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 250 ppm - 0.5 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : know your plant tolerance limit of E.C stress once you saw the very very little yellowing on tips of leaves , that's the sign to don't go further , never reach that limit if you want a high quality buds, in my case tolerance is 1.8 and i'll reach to that level only once a week to cause precision stress , love your plants and have a happy growing!
Likes
224
Share
@yan402
Follow
This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 03.10.25 VW23 did a HST/LST session 📹 12.10.25 VW25 Done a major HST session to try and keep them in line with the Sunset Sherbet GF I have going in the same tent, rest in the video 📹 17.10.25 VW25 ffj/fpj/fish 30 → 60 ml 19.10.25 VW26 it just became a one plant diary, keeping #5, #6 gets it's own diary for testing nutrients. 20.10.25 VW26(?) Feed tweak: added 3 g Calcium Nitrate/ 30 L (≈ 15 ppm N + 10 ppm Ca) 24.10.25 VW26 did a defoliation and trimming session 📹 25.10.25 VW26 I'll be repoting tomorrow, 26.10.25 VW27 rest in the video📹 27.10.25 VW27 Epsom Salt 0 → 2.5, Calcium Nitrate 3 → 9 g 01.11.25 VW28 CalMag 60 → 30ml, TriPartBloom 20 → 30ml, Magnesium 2.5 → 3.5g 04.11.25 VW28 no more yellowing between the veins and no new spots, the changes to the schedule worked, rest in the video 📸 09.11.25 VW29 Did what I'm hoping is a last cleanup 🎥 12.11.25 VW13 Did another cleanup in the tent 🎥, also switched to the FERMAKOR PK Micro schedule, (10.11.25) added Phosphoric acid as a pH down in preparation for flowering 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 15.11.25 VW29 – no feed no water 16.11.25 FW1– no feed no water (*RUNOFF reused for indoor house plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30 L #1 Veg — FERMAKOR 🍶💧🍶💧🍶💧🍶💧🍶 💧 Calcium Nitrate (Calcinit / Nitcal): 45 → 40 g = 1.33 g/L → 207 ppm N + 253 ppm Ca 🍶 PK Concentrate (FERMAKOR Base): 30 → 40 ml = 1.00 → 1.33 ml/L → balanced 1:1 P:K + light micros (from extract) 💧 Home-made FFJ/FPJ (Fish + Veg): 30 ml = 1.00 ml/L 🍶 Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → 26 ppm Mg + 35 ppm S 💧 Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm • Mn 0.7 ppm • Zn 0.3 ppm • Cu 0.3 ppm • B 0.1 ppm • Mo 0.02 ppm 🍶Phosphoric Acid (pH down) + Citric Acid (chelation): as needed → First set pH with phosphoric acid, then add a little citric only if you want extra chelation 💧 Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL: 60 → 70 ml / 48.5 g inputs per 30 L = 2.00 → 2.33 ml/L + 1.62 g/L ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31
Likes
Comments
Share
Here we go into week 2 looking happy as ever everything seems on point 🤞
Likes
11
Share
Harvest 2 weekend ago and dried at ~60° at 60 RH. Took about 12 days total.
Likes
2
Share
@Roster
Follow
Setted up this cutting of Skywalker. Having some initial problems with air and humidity. Hopefully is going to rain soon so humidity will rise a bit. Planning to do some LST and ScrOG. I'm helped by a friend because my skills are not good enough yet. Let me know if you liked the sequences! I'm trying to do some timelapse research as well. Raspberry is running the timelapse and compiling the video I'm trying to update every day or two. 😷7/12 Changed water due nutrients deposit. Clean start as the roots have touched the water. EC 1.5 Ph 6.2 😵Ps. light was set with VEG and BLOOM BOTH ON! Lol, hopefully this is the 5th day 😂
Likes
17
Share
Welcome Back!💚 Nach der sechsten Blütewoche kommt der Kampfzwerg an die Ausreifung der Blüten. Sie zeigt ein schönes Blütenbild für ihr Größe. Die Blütenstruktur ist kompakt und Dick, und es entwickelt sich ein frisches, säuerliches Aroma. Wenn es ein Apfel sein soll dann geht es in die Richtung Granny Smith. Die Pflanze ist sehr kompakt und kurz gehalten und hat im Stretch auch nichts mehr gerissen. Die Umgebungsgegebenheiten sind gut: ————— 🌞 Temp: 27°C 🌚 Temp: 18°C bis 19°C 💨 RH: 56% VPD: 1,10 kPa 😎 PPfD: 830 mqm ————— Viele Grüße 👋
Likes
Comments
Share
@Cmccart
Follow
Second grow after mangling the first lol
Likes
10
Share
@KcKush
Follow
*Increased PPM from 650 to 750. *Transplanted to 5 Gallon pots. *Inside grow tent will flower maybe tomorrow. *Might take clones of one.
Likes
79
Share
@Salokin
Follow
Hello Growmies, Week four of vegetation for our Epic Buzz by Anesia has been marked by remarkable progress and environmental optimization. The uniform growth has continued, with each plant reaching a robust 20 cm in their spacious 12.5-liter air-pots, signaling a very successful vegetative phase. The integration of the heater and humidifier into the tent's system has been a game-changer, allowing for precise control of the growing conditions. The environmental graphs are showing admirable consistency in temperature and humidity, which is key to maintaining an ideal VPD level for the plants, ensuring optimal transpiration and nutrient uptake. The Photone app indicates that the light intensity is within the ideal range for this stage, with readings of 150-180 PPFD. The lights, dialed down to 25%, along with the strategic use of IR lighting for 30 minutes at the transitions of the day, support the natural growth cycles of the plants. Concurrently, the UV lighting's midday cameo for 30 minutes is a masterful touch, potentially enhancing plant resilience and future resin production. Once the connectivity issues are ironed out, the Mars Hydro inline fan will be operational, enhancing nighttime dehumidification, a critical aspect of maintaining plant health by preventing excess moisture and the issues it can bring. This will round out the environmental controls, making them as meticulous during the night as they are throughout the day. The Epic Buzz plants are set to continue their vegetative journey in an almost perfectly controlled environment, thanks to the thoughtful and precise adjustments made around the garden. The upcoming week is poised to be another step forward in a vegetative phase that's been characterized by attentive care and environmental mastery. Stay lifted, salokin.