I topped both these ladys yesterday. There starting to look indica I believe. Which what I was hoping for because I've got all kinds of sativa growing.

I never thought I'd say it but i think when it comes to my indoor C4 vs my outdoor C4 Indoor takes the prize, I mean that's only for now lets see what happens in the upcoming weeks. I'm sticking to my bat turd mix and all sun, I shift her around during the heavy showers, yea it rains out here. I don't feed no store bought nutrients all from nature same goes for my indoor ... if you look closely you'll see that I lst her it's only because of her mutation.

Remarque : nutriments à 50 % de la dose recommandée. Peu d'évolution, se développe très lentement.

Its been pretty smooth this week, only mistake was that the light was to close so I got lightburn and bleaching on 2 tops, lesson learned. The SF4000 is still put at 85% and im still slowly cutting down the nitrogen, im currently feeding 2:1:1 ratio of (4-18-38/magnesium sulphate/calcium nitrate)

Red Pure CBD - Growing pretty well, I'm thinking I have some deficiencies in these now that that have properly started pushing flowers out fast, I've dosed with PK13/14 and CalMag. We are getting some colour showing too. Pink Kush CBD - Even the runt plant is growing though not as well as its neighbour or the Red Pure plants, lots of colours are coming out on the runt, colours on the better plant too but not quite as prominent. Fingers crossed the PK and CalMag will sort the Red Pure leaves.

Growing well, starting to see some trichomes development. This girl really stretched out, loving her size. Lots of bud sites, I think this PT will be my biggest producer out of the three I’ve grown. Smells very flowery and fruity, loving how vigorous this plant is growing.

I rinsed with clean water. Both plants received 1 liter of water each, since I grow without drainage so that they have a clean transition to flowering. Even though I grow organically, rinsing never hurts, quite the opposite. I thought that Anesia could no longer surprise me, but with each new strain I see how wrong I was. I had to reduce the light intensity to 60%, the think tank didn't accept it, We are gradually increasing the intensity. Currently it is at 65% and 35 cm away from the peak. peace

ERROR UPLOADS PHOTOS ALL THE TIME PLEASE HELP 8 DAYS ALREADY ERROR PHOTOS

D43/V39 - 13/05/23 - Changed water , added nutes until EC=0.9 D44/V40 - 14/05/23 - Defolation - Added water EC= 1.1 pH 6.5 D45/F01 - 15/05/23 - Start flowering. Monitoring water from maximum to above, for the week out D46/F02 - 16/05/23 - Continuing LST. Flowering stage is now clear D47/F03 - 17/05/23 - EC= 0.9, Added nutes until EC 1.1. pH 6.4 (added some drops of pH-) D48/F04 - 18/05/23 - Added water and nutes EC=1.1, pH 6.5 D49/F05 - 19/05/23 - Nothing to report

10/10/21 new week for Hyper glue Growing almost a month now did some topping last week and today started to LST the main everything going great so far plants loving the new FC-4800 so as i absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely one hyper glue has to wait for main LST 12/10/21 The other hyper glue got LST clip on the main and think this was one of best ones so far 14/10/21 Growing very nicely giving them the watering and nutrients when they need it . I am trying to understand plants better by looking at feeling soil etc instead of a regiment. And learning we do every day because bin growing in 11L pots but now in 8L pots so that means that there gone be smaller then my first grow . But hey got now 12 plants going on and not 4 so that will help lol 15/10/21 Did some small defoliation and some of them get light penetrating better visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.

Сегодня я заметил нехватку магния и небольшую нехватку калия. Я добавил Plagron CalMag (0,4 мл), и в то же время начинаю постепенно вводить Plagron Green Sensation — начиная с 3 мл на 10 литров и увеличивая шаг за шагом. Большое спасибо всем, кто следит за этим отчетом о выращивании.

I have spent the last week studying how to use COB led efficiently. On my last grow I just whacked them straight up to "11" and hoped for the best. This grow I intend to change track and try and use the least amount of light possible to get the best results. To be fair my light is way over spec for my 60x60 tent. I want to use the dimmer to lower the intensity of the light to more than adequately match the needs of my space. Then I can use the over head of light intensity that I have as the grow progresses into flower. I would enjoy any comments or feedback any advice is good advice in my opinion.

Ende Woche 5 Anfang Woche 6 Bruce Banner 1 hat vermehrt Rostflecken eventuell durch zu geringen Abstand zur Lampe in Wochen 2 und 3 Alle anderen zeigen nur geringe Probleme Der Geruch wird immer intensiver

🌱 Sour Diesel — Week 8 (Flower Week 3) — Strategic Reset Week ⸻ 🔁 Quick Recap — Where We Are • Genetics: Sour Diesel • Timeline: Week 8 from seed • Flowering: Week 3 • Height: ~60–70 cm (compact structure) • Room Temp: 28°C • RH: 65% • Feed EC: 2.9 • pH: 6.5 (kept above 6.0 intentionally) • Lighting: LED • Action this week: Strategic defoliation This plant is not tall — she’s compact, dense, and structurally tight. Which means airflow and internal light penetration become critical early. And that’s exactly why this week mattered. ⸻ 🍃 The Defoliation — Not Aesthetic. Architectural. This was not cosmetic trimming. It was: • Removing large fan leaves blocking interior bud sites • Cleaning inner congestion • Opening airflow channels • Resetting light distribution across the canopy • Helping the entire room environment (not just this plant) The room needed air — this plant was advanced enough to handle stress. That’s key. Week 3 of flower is the transition window: • Stretch is slowing • Bud sites are set • Energy shifts toward stacking At this stage, a strategic defoliation: • Improves transpiration efficiency • Reduces microclimate humidity pockets • Prevents internal leaf-to-leaf condensation • Encourages bud site activation below the top canopy This was structural architecture. Not haircut vanity. ⸻ 🌡️ 28°C in Flower — “Too Hot?” Let’s Go Deep. People panic when they hear 28°C in flower. But here’s where most growers confuse: 🔥 HPS vs LED Heat Behavior Under HPS: • Radiant heat warms leaf surfaces directly • Leaf temperature often equals or exceeds room temp • 28°C air under HPS can mean 30–32°C leaf temp • That pushes VPD dangerously high Under LED: • Less infrared radiation • Leaf surface temp is typically 1–3°C LOWER than room temp • So at 28°C room temp, leaf temp might be 25–26°C And VPD calculations depend on leaf temperature, not air temperature. ⸻ 🌿 What Is Leaf VPD? VPD (Vapor Pressure Deficit) measures the difference between: • Moisture inside the leaf • Moisture in the surrounding air But if you calculate VPD using only room temp, you’re missing the real transpiration dynamics. With: • 28°C air • ~25–26°C leaf surface (LED) • 65% RH Leaf VPD sits in a very workable mid-flower zone. Not extreme. Not stress-inducing. Not shutdown territory. We’re driving metabolism, not cooking terpenes. ⸻ 💧 Why 65% RH Isn’t Dangerous Here Context matters: • Good airflow • Opened canopy • Compact but cleaned structure • Early-mid flower (Week 3, not Week 7) At this stage: • Pistils are forming • Bud density is still moderate • Transpiration is active High humidity becomes dangerous when: • Bud mass is dense • Internal airflow is poor • Late flower resin traps moisture We’re not there yet. And we just improved airflow with defoliation. ⸻ ⚡ EC 2.9 — Aggressive but Intentional That EC is strong. But: • Plant is compact, not oversized • Sour Diesel can eat • pH 6.5 keeps availability wide (Ca, Mg, P balance) The key will be: • Watching leaf tips • Monitoring runoff behavior • Watching for clawing or salt stress Right now, if she’s praying and stacking, she’s handling it. ⸻ 🔍 What To Expect Next Week (Flower Week 4) After defoliation: You may see: • Slight pause (24–72 hours) • Increased vertical bud push • Better lower-site activation • More defined pistil clustering • Stronger apical dominance response If recovery is clean: • Buds begin early stacking phase • Internodes tighten • Resin production initiates at bract level If stress appears: • Slight leaf droop • Tip burn acceleration • Reduced upward leaf angle But based on structure and timing — this looks calculated, not reactive. ⸻ 🧠 Why This Week Matters Long-Term This week determines: • Airflow pattern for late flower • Mold resistance later • Bud density uniformity • Final trim efficiency • Light-to-bud conversion efficiency This wasn’t about now. This was about Week 7 and 8 survival. ⸻ 🙏 Appreciation Section To: • The OGs here since seed • The new followers discovering the journey • The silent readers • The critics • The skeptics • The lovers • The haters • The platform • The sponsors • The community • Grow Diaries itself Everyone has a place here. Growth happens in public. And that takes courage. Respect to all of you. 📡 Please stay tuned they can try and take us down but we never quit https://www.youtube.com/@DOGDOGTHEDOCTOR NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

She is really stacking the Buds. Absolute pleasure to watch her develop D58: Feeding 4l D60: Feeding 4l. Switched to Overdrive. Minimal foxtailing is forming D63: Feeding 4l.

This week I´va started to smell some sweet and fruity aromas... 😊😊😊 The buds are taking weight and the trichomes start shining 🙌

Hello Diary. We have reached the end of the third week of flowering, Sherbet Queen is already a real beauty. She reached 89 cm which is one cm more than last week which means she has reached her final height. The flowers fill nicely, the scent is more and more intense and they stick to the fingers to the touch. The leaves are dark green in color and shine in the light. I cleaned the lower part of the plant earlier so that there is a good flow of air through the plant itself. Impressive plant, shape, height, ideal dimensions for my Farm. I water the plants every two days, they drink really a lot of water. This week I added Bio Grow, Bio Bloom and Alg-a-Mic from BioBizz to one watering. The temperature is around 29 degrees, during the day it even rises a little above 30 degrees, but so it is in summer, I hope it will not cause stress to the plants. Here’s what it looked like last week. 20/06/2021 - Day 36. Watering. I added 1ml / lit CalMg to 8 liters of water, I lowered the p.H. at 6.5 and with that amount evenly watered all three plants. Temp / Humidity on the farm - 29 degrees and 60% humidity. 22/06/2021 - Day 38. Watering. This time I just regulated p.H at 6.3. I did not add any nutrients. Temp / Humidity on the farm - 28 degrees and 47% humidity. 24/06/2021 - Day 40. Watering. I added Bio Grow 1.5 ml / lit, Bio Bloom 1 ml / lit and Alg-a-Mic 1ml / lit. p.H. I dropped to 6.4. Temp / Humidity on the farm - 31 degrees and 52% humidity. 26/06/2021 - Day 42. Watering and photography. p.H. I dropped to 6.5. Temp / Humidity on the farm - 28 degrees and 45% humidity. That’s all from me for this week, thank you all for your support, see you soon.

Mental rainbow f1 has been developing well the bid site are bulking up noticeably whilst just started seeing the production of thrichomes on the main bud sites while at the smaller side branches are not that far behind the main ones