👉Dropped Seed into solution of 1:16 H202/ H20. After 48hrs the shell split and the tap root started peeking out. Then placed in black plastic container between two squares of cellulose fiber towel and soaked in the H202/H20 solution. After 24 hours the tap root has grown to 1/4" and was then placed into the media. The plant emerged two days later and is healthy.

Week 8 of flower, started flushing with "clean fruits" few days ago. Also picked all the bigger leaves out and removed the ScroG net. Buds are very dense and hard, so I will harvest as soon as possible to prevent bud rot. First sugar leaves seem to have tendencies for moulding soon as they started turn brown. I will try to raise the temperature a bit and reducing the air humidity. They are very sticky and now offering a strong smell. I only open up the tent for 5 minutes and the smell is exploring the whole house. Wife is not amused.😂

Hello everyone. My MAC 1 F1 Hybrid is officially at day 28 of flower, and she’s getting so huge it feels like I’m growing Godzilla right here! The buds are forming nicely, and I’ve raised the PK 13 14 to 7 milliliters on 10 liters of water. ​The humidity is sitting between 55 percent during the day and 62 percent at night, and I’ll be adding a dehumidifier within one week. Temperature-wise, we're seeing a minimum of 19 degrees at night and a maximum of 27 during the day, though it mostly maxes out at 25. The green foliage and the canopy are looking outstanding. ​Thank you for stopping by and have a nice day! Best regards, Growfather.

Maceta de 7 litros poda apical al sexto nudo, eliminamos el primer nudo y nos quedamos con 5 nudos 10 brazos

Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎

Hmm, now the peat and coco are looking quite different. The coco plants have thicker stems, but they also look like they could still use a bit higher EC. On day 14 I watered the peat plants and did some defoliating, that's what you can see in the pictures. There's not a whole lot to see yet, but I really like this plant already. I'm having positive experience with coco. the peat plants got 1.7 EC water with 2.2-2.7 EC runoff (1100-1350 ppm), 6,5 ph The coco plants got 2.0 EC water with 1.4-1.7 EC runoff (700-850 ppm), 5.5 ph as per the recommendation by plagron

Going well

Did some lollipoping this week, but not much. Buds start to get bigger, all looking and smelling good, stretch is over. DLI was increased to 36.

Bubblegum xxl

I mean where do I even start this is such a beautiful plant and everyday this thing gets bigger I mean how could you not love that! Fed B1 B2 Floraflex Only Ec-2.6 Ph-6.2 No Cal-Mag

I purchased these seeds along with 100+ others (individual seeds, not packs) in late 2006 and early 2007 by sending Western Union money orders to the UK in birthday cards along with my seed order. My only recourse was crossing my fingers and hoping that my seeds would eventually arrive. What I found was that the “Buy it Now” option on Seedbay turned out to be pretty reliable. They used to have a Nirvana 4 pack deal for a very reasonable price ($50, I think). European seed producers at the time were very guarded with the lineage in their crosses, but the common thought was that Nirvana was taking known elite Dutch cultivars of the time and breeding them with a Skunk #1 male and producing ‘knock offs’. AK-48 was AK-47xSk1, Blue Mystic = Blueberry x Sk1, Bubblicious = Bubble GumxSk1, Jock Horror = Jack x Sk1. The point being, there ended up being a lot of variation in packs, but also some keepers were there to be found. I did some growing at that time, but ended up buying a ton of seeds that I never used. As a daily user for almost 30 years now, self sufficiency made/makes a lot of sense. A couple years ago I decided to get back into growing my own herb after being disappointed and underwhelmed with the quality of flower from the dispensaries.

Growth exploded this week as the flowering stretch kicked in. Swapped the 600w MH bulb out for a 600w HPS. Introduced low strength biobizz bloom feed 0.5ml/l Only issue I was having this week was slightly high humidity bur I've popped a small dehumidifier in the tent that seems to of sorted that out.

I am increasingly convinced that I will have to cut GG3 first (probably at the end of this week, given the darkening of all those trichomes) and in at least a week (if not more) GG2 come on girls!

(3.8.22) Day 21 of flower. Watered each plant 2.5L of nutrient mix. POST NUTE FEED RUNOFF LEVELS: Plant 1: 1605ppm, 6.2ph Plant 2: 1367, 6.6ph Apprehensive/not sure how to go about further defoliation. I’ve removed everything from below the net, and taken away every fan leaf that looks like it’s not directly connected to a bud site. Everything that remains appears to be connected to a bud site. Do I need to remove more? On one hand, I’m afraid that I’ll end up stressing out the plant this far into flower. On the other, I’m afraid of possibly running into PM at some point. RH is increasing with the warmer weather (between 45-55, 65 on a rainy day). Lots of little leaves laying on each other. Thinking about getting a small dehumidifier to put into the tent. Also, just going forward with future grows, should I have removed every branch that grew out of one of my mains? If you look at the photo below the net, I’ve got my main branches and all those little stems that branched out seem to be what’s really causing the crowding. I thought the point of LST was to have it do exactly that, but looking at everyone else’s grow it looks like they just limit themselves to the big main branches and clean up everything else. (VIDEO) I've got two 6" fans. One at the bottom right under the net blowing up, one at the back left above the plant (but slowly being taken over) blowing down. Everything in between seems to be dancing around with air. It being my first grow, I'm not sure if I'm not doing enough or overdoing it lol (post script): For plant 1, the scrog net is only 8 inches above the soil. With plant 2, it's only 5 inches above the soil. I was so concerned about the plant "possibly doubling or tripling in flower" that I really LST'd my plant early on and did my best to level her out. As a result, I was able to fill out the perimeter of my tent easily, but there was not much vertical growth to speak of. This meant that when I put my scrog up, it was barely above the rim of each pot. Next time/grow, I may experiment with letting the plant get a little more height before leveling her out? Idk/not sure. Also, my light placement was close enough that my node spacing was VERY tight. I've read that this is a good "problem" to have, but I can't help but thinking if my plants had a bit more verticality to them they'd be easier to work with. (3.10.22) Watered both plants with 2.5L of ph'd water. Was a bit lower than I would have liked at approx 6.2ph, ppm was 83 Post water runoff: Plant 1 - 6.2ph/1248ppm Plant 2 - 6.3ph/776ppm

Day 111. First is ready, second week behind, third maybe even 3 weeks behind .... Plus they are LEAFY ,!!!! Trim jail ... Wet trim for all of them - no doubts !!! Day 115. Still hanging, slowly drying and result should be decent at the end ... A week more I guess, very humid in UK ... Day 118. First trimmed - 175 g. Other is chopped ! One still grows ... Day 136. Chop day for the last one !!! Long run .... Happy Growing !!!

No fim da semana ela já começou a ter um pouco de cheiro, terminou a semana com 24 x 24 x 22 cm, fiz uma amarra

She is growing again and larger, full adult size leaves are now growing back. Going to leave her to the veg room by herself in the coming week. When we will FIM her and do some more LST, depending on how well she grows this week.

So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.

Growing slowly but surely. I will update again in 2 weeks or 3 weeks. Not too much of a difference except for yellowing of some leaves. In two weeks hopefully trichomes will change color and I can switch to straight water with no nutrients.