Flower power Time 🤘🏻🎉🤘🏻 They are starting to pube up so good times ahead Keeping posting Tru the week 28/10/22 Removed the lowest 2 branches 29/10/22 Removed the Layer of perlite and added some soil to top some Pots off 31/10/22 The Stretch is coming all sweet seeds gave nice structure red gorilla girl is little bit smaller then rest but she can always Catch up

This strain of Kings kush is a smelly one, I still can put my finger on the terp profile yet. Almost a kushy herby dank is all I can describe atm. Growing these plants, I would suggest pruning every second node once you get her into flower since the bugs tend to push up against each other and may cause bud rot. Say ontop of defoliation and try to qork on them on a daily basis rather than lolipoping. Another key thing is to keep rH in range during flower, I will recomend to set it to 40-50rh in flower. Also if you are growing outdoors, Be sure to cover them up during rain when in flowering, I uses a transparent tarp for the last 5 weeks of flower. Save my plants from 9 huge rain events during the last 5 weeks, my plants would of died from br. This strain had some decent cold resistance also! She stay alive with with few events of temps getting down to 4 deg c.

Really thriving to be honest, really fattening up both along stems and in bulk, really impressed with this plant had it down for the weakest at very beginning but has proved to be a really good strong plant. Really looking forward to see this go into the last few week, hopefully gets some nice colours

Day #22: The day after defoliation day... And for now it seems that the #AutoGelato ladies are recovering pretty fine, but let's not be too enthusiastic... Things can still go wrong in the next few days, but if all goes well I will be bending the ladies down in a day or two... One of the ladies is growing very nice, all branches seem to be growing towards the same height, exactly like you want them to do... Day #24: The Gelato Auto ladies from @Fast_Buds are recovering very good from their topping and defoliation last week. I must say that my LED lights from Lientec LED are helping a lot with their high quality light... Today I will start with LST, so I can create as many 'main'-branches as possible 😋 Day #26: I decided to LST just two plants for now. The rest is growing good and has a lot of branches at even height... I'm also almost at the point that I won't be adding Fulvic to the water anymore. So in week 5 the plans will only have FloraGro and FloraMicro as nutrients. Day #28: Tiny buds are slowly developing over the garden. Plants are still looking extremely good, growth is very good for 8 plants, 2 are a little behind in growth. But they were behind, before topping and LST already... In the new week, the lights will be slowly set to a higher power setting, so when blooming starts, they already have the best light they can get...

So these girls are shorter than expected allthough the 2 girls are of decent height enough for me too flip along side my aptus fed girls. I have defoliate all areas that covers light getting too the lowers and also removed excess branching too focus energy towards the main tops also did this via a little lst 🌱 One of each plus an extra 412 so hopefully they stick through and make it too harvest which they look too be healthy so far. I will next defoliate on week 3 of flower and also remove excess plant matter taking up neccasary energy 🌱 Shogun is serving them well so fa! Lights will be 12/12 tonight Week 1 flower commences then Stay blessed 💚

Bit disappointed with the phenotype.

Nice strain

6/24: Things are looking good! Haven't really changed much, but I did bring the light a little closer to the plant and I brought humidity down to 70%. The bud sites are growing very quickly. Hoping to be able to start some LST by the end of the week. 6/26: Loving the growth still! Keeping things as is still, as I am liking the results so far and don't think she would benefit from any adjustments. The 4th node has dropped nicely and 5th is coming along fast! Also, I planted four mystery seeds I received from a friend and three of the four popped today! We plan on trying our hand at a little outdoor growing with these. Nothing like a little experimenting, right? 6/29: All is looking well. I did remove the lowermost node, as well as start some LST on the second node. LST is something new to me an an opportunity i was not afforded with the slow growth and early flower of my last grow. I'm excited to see what different it will make. I plan to do the same on the 3rd node as well in the coming week. It's been fun watching this plant grow! WEEK 3 AVG TEMP: 73.2F WEEK 3 AVG HUMIDITY: 66.8%

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

26 giorno di fioritura, le ragazze stanno crescendo bene nessun problema riscontrato struttura resistente ,lampada led bavagreen 480w a 40 cm dalla cima ,soluzione nutritiva N20P20K20,TEMP-24 EC 1680 PH 6.0,provero ad aumentare lentamente EC della soluzione ,si accettano consigli per aumentare la resa se possibile

Flower Week 6 Day 42 to 48 - 3/26 to 4/1 Stepped up my attention with these this week and hope I didnt let them go too far for a decent harvest. I defoliated for the last time this week and spotted more purple leaves. The buds are super dense so I have higher hopes than I did last week Feed this week was 1.25 gallons 2 times. 700ppm total before add-ins. I used 400ppm Bloom concentrate mix (recipe week 5). Then I added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) PH balance this week was 6.6 I plan to feed 1.25gal 2 times with 6.6ph and half nutes. This will also be the same for all remaining feeds before harvest. From this point Im simply watching for signs to harvest in the pistils, calyx, and trichomes

I installed a Water ring

Day 98 - she is still flowering! This week a few stems have bent over, I've had to support them before they break. I can see her going another 3 weeks easy....... I hope she yields A LOT 😋😍

At least one plant or more is needing water daily as they are drinking so much.. still trying to pull the humidity down as it's in the high 60s. Other then that..the girls are looking phenomenal.. Hope to see you guys till the end..It's Going to be an Amazing Harvest

Si no haces nada especial para ti y actualizaremos para ti también y para siempre 😂

Weeks ahead looking very promising 👌...#happy growing

Had to tie branches up to take weight, gonna be a beast 😬🔥👊🏻 Fully flushed and ready for the chop!

As of day 14, I am happy (although a little worried) about how the grow is going. Growth continues to be somewhat strong and new growth seems to be healthy, but the issue that affected the lower leaves has left me a little spooked. It has continued to the second set of leaves to a limited degree. I have mostly eradicated the fungus gnats who moved in from some houseplants so that is a plus. Poor transplanting technique could have also damaged the roots, as the issues became most apparent after potting up to 1 gallon containers. Although I have been very careful to PH my nutrients after mixing, I realize I was not PHing at every fertigation and may have missed some early swings upwards in my watering reservoir so I am now being more diligent making sure the PH is consistently under 6.2. I am hoping that these actions will have fixed whatever issue was occurring, but if there is anything I may have missed please let me know! I have a expanded the timelapse to contain all the growth up to day 14, and will continue to re-edit it for every week. Thanks for reading, and happy growing! Day 16: began LST to expose/encourage the new branches. There has been plenty of healthy new growth, so I suspect that the leaf issues were due to temporary PH fluctuations in my watering reservoir that went undetected. Thank you to those who answered my grow question! 👍 Day 17: FIMed the Blue Dream'matic, which has been growing strongly. I went a little more aggressive because in the past I have messed the technique up by getting mostly leaf instead of the new node of growth. Hopefully it goes well this time! Day 18: more LST will wait as my smaller plant Staples do not have enough hold, when I transplant to 5g pots I will continue. Day 20: a few lower leaves continue to show the browning. I will transplant at day 21 which will give me a chance to check the roots, and I will be adding h202 to my watering bucket to prevent pH swings due to bacteria (which I believe has caused the issue). The plant is still growing vigorously and is branching well post FIM.