Likes
Comments
Share
Mango Kush – Week 2 Flower (Week 6 from Seed) Bloom boosters, high temps, new lights, and a little tribute to nature Grower: Dog Doctor Strain: Mango Kush (Pheno #1 & Pheno #2) Environment: 8×8 Grow Room Control System: Full TrolMaster ecosystem (Tent-X brain + WCS substrate sensors and more) Lighting: • ThinkGrow Model One • ThinkGrow ICL-300 (x2 inner canopy lights) • Future of Grow Black Series 600W • Lumatek Zeus 465W Compact Pro ⸻ 🌸 Week 2 Flower – Transition Mode The Mango Kush sisters are looking absolutely stunning, even if this week was busier for me and I only managed a few photos. 🌱 Instead, I recorded a video walkthrough so everyone can see the whole room vibe, happy, lush, and full of energy. Both phenos are pushing beautifully into flower: • Pheno #1: Taller, branchy, already stretching into her flower frame. • Pheno #2: Started later, but catching up fast, morphing gracefully into bloom. The morphology shift is very visible this week, especially with the introduction of new bloom-focused nutrients. ⸻ 💧 Feeding Update – The New Recipe This week we swapped Start Booster → Top Booster and introduced a few Plagron classics to complement the Aptus base: Water Mix (per liter): • Aptus Regulator – 0.15 ml • Aptus CalMag Boost – 0.25 ml • Aptus Top Booster – 1 ml • Plagron Power Buds – 1 ml • Plagron Sugar Royal – 1 ml • Plagron Green Sensation – 1 ml We paused All-in-One Liquid for now, letting the slow-release pellets in the super soil do their work. The idea: less redundancy, more synergy. 💡 Experiment in Progress: I’ve used Plagron successfully in the past, but this is my first time weaving their trio (Power Buds, Sugar Royal, Green Sensation) into an Aptus base. It’s improvisation, yes, but that’s where discoveries are made. Let’s see how the Mango Kush girls respond! ⸻ 🌡️ Environment – Riding the Highs • Temps: Sometimes peaking at 34°C (🌬️ AC unit on the way soon!) • Humidity: 60–70% at times • VPD: ~1.89 kPa • Soil Moisture: Watering when down to 19–20% • Monitoring: TrolMaster WCS Substrate Sensor → feeding me EC, moisture, and root zone data in real time ⚠️ It’s not a “perfect” VPD chart this week, but the Mango Kush girls are handling it like champs. Sometimes stress teaches resilience, and these ladies are showing strength. ⸻ 💡 Lighting the Room The canopy is now supported by a serious multi-light orchestra: • ThinkGrow Model One – Main engine, full spectrum power • ThinkGrow ICL-300 – Inner canopy lights bringing energy to lower branches, helping all bud sites shine • Future of Grow Black Series 600W – Supporting spectrum balance • Lumatek Zeus 465W Compact Pro – Newly added, boosting the footprint and canopy penetration Together, this creates an even distribution of photons across the room, minimizing shadow zones and preparing the girls for heavy bloom stacking. ⸻ 🧠 TrolMaster Ecosystem – Grow Room Brain The Tent-X controller, paired with WCS substrate sensors, has become my right hand: • Live feedback on soil moisture, EC, temp, and RH • Smarter watering decisions (no guessing, just data) • Automation ready → The dream of a fully self-regulating grow room is coming closer For now, I still hand-water, but soon automation will take over. Until then, it’s hands-on love every day. ⸻ 🐝 A Tribute to Bees – Nature’s Pollinators While we manage indoor canopies with LEDs and controllers, let’s not forget the simple magic of nature. Outdoors, it’s the bees that keep the cycle of life moving. One photo I’m sharing this week is of a bee pollinating a flower, a reminder that without them, much of our food (and medicine) would vanish. Bees are not just workers; they are guardians of biodiversity. 🌍💛 Let’s honor them in every grow, even indoors, where they cannot reach. ⸻ 🔄 Recap So Far – From Seed to Now • Week 0–2: Germination & seedling stage, Aptus Start Booster for early vigor • Week 3–4: Veg growth, branching in Pheno #1, Pheno #2 catching up • Week 5: Flip to flower, stretch begins, PPFD raised to 766 • Week 6 (Now): Morphology shift, bloom boosters added, lights upgraded, temps testing resilience The Mango Kush girls have evolved beautifully every step of the way , two different phenos, one journey, one story. ⸻ 🔮 What’s Next • AC installation → stabilize temps into the sweet 26–28°C range • Closer monitoring of Plagron + Aptus synergy → expect denser flowers • Watch for first true pistils and bud formation in Week 3 Flower • More light power on standby as the canopy fills out ⸻ 📹 This week’s highlight: A video tour of the full room (since fewer photos this time). 📸 A few shots are included to show just how happy the Mango Kush girls are. 🌱 Thank you everyone for reading, learning, and growing along with us! Join us on YouTube and Instagram for the full behind-the-scenes journey. 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial There’s a new series blooming and it’s more than just plants. It’s about process, patience, and paying attention. ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 P.S.- Why These Plagron Additives? – A Deep Dive I’ve decided to complement the Aptus base with three Plagron boosters. Each one has its own role in the flowering process, and together they form a very balanced support system for the Mango Kush ladies. 🌸 Power Buds (1 ml/L) • Purpose: Early flowering stimulator • What it does: Power Buds encourages the plant to initiate bud development faster. It shortens the “transition phase” from veg into bloom, helping flowers form sooner and more consistently across the canopy. • Why now: We’re in Week 2 Flower, the exact point where we want to signal the plants: “It’s time to build flowers.” Power Buds sends that hormonal nudge. ⸻ 🍯 Sugar Royal (1 ml/L) • Purpose: Enhances resin, aroma, and stress resistance • What it does: Sugar Royal contains amino acids that stimulate the plant to produce more chlorophyll and secondary metabolites. In plain terms: richer terpene profile, stickier resin, stronger smell, deeper taste. • Extra benefit: It also reduces stress from heat or drought, very useful right now since our temps have been spiking up to 34°C. • Why now: As stretch continues, plants need to stay strong and not waste energy on stress. Sugar Royal helps them thrive despite less-than-ideal VPD. ⸻ 💎 Green Sensation (1 ml/L) • Purpose: All-in-one bloom enhancer for the second half of flower • What it does: Green Sensation is a powerful 4-in-1 booster that improves: • Flowering: denser, heavier buds • Resin production: frostier flowers • Nutrient uptake: more efficient feeding • Soil health: stimulates beneficial microbial activity • Why now: Even though it shines brightest in late flower, starting early allows the soil ecosystem and plant metabolism to adapt gradually. By the time we hit peak bloom, the system is fully primed. ⸻ 🌱 How They Work Together • Power Buds → Kickstarts flower sites • Sugar Royal → Enhances resilience + resin quality • Green Sensation → Boosts density and overall flower performance The trio works like a team of specialists: one accelerates the start, one polishes the quality, and one pushes yield potential. Combined with the Aptus base (Regulator for strength, CalMag Boost for structure, Top Booster for bloom push), it’s a balanced, experimental, but very promising recipe. 💚 Growers love to all 💚
Likes
1
Share
@tterpy
Follow
Growing strong and big Plain water : 5/10/26
Likes
9
Share
THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Processing
Likes
35
Share
Week 9 their wasn’t any real changes. Everything is on par with week 8. Girl #1 looks like she’s starting to gain some more weight. I’m satisfied with her progression so far. Girl #2 still hasn’t shown any flowering. I will keep It short this week. Nothing really to report. I’m excited for the next coming weeks. Thank you for viewing my diary.
Likes
6
Share
The girls are looking very good. Starting to put on some weight now that the stretch has finally finished. The ladies are very tall but they look like they will yield well. Buds are developing quickly and are starting to look frosty as well. Have been using the Plagron Green Sensation to help bud development in the later stages of flower. Will be happy to see how these ladies turn out. They are starting to smell a bit stronger every week. Since I am using the Blumat drip system these ladies are pretty much on autopilot from here. Thanks again to Zamnesia and Plagron for Sponsoring. See you next week and happy growing.
Likes
22
Share
Week 5 there was a lot of sun I watered it completely every 3-4 days
Likes
10
Share
@L1lium
Follow
Es ist soweit! Am Freitag habe ich die fünf Easy Buds nach knapp 11 1/2 Wochen abgeschnitten und geerntet. Leider musste ich feststellen, dass eine Pflanze ziemlich stark befallen war. Ich vermute eine Milbenart oder möglicherweise Fliegeneier. Unterhalb der Blätter waren etliche dunkelgelbe und dunkelbraune Eier, die man auf den ersten Blick kaum erkennen konnte. Bei genauerem Hinsehen sieht man jedoch, dass sich der Befall auf die ganze Pflanze ausgeweitet hatte. Glücklicherweise blieben die vier anderen Pflanzen verschont. Aus diesem Grund trockne ich die Pflanzen auch getrennt voneinander. Die befallene Pflanze wollte ich nicht direkt wegwerfen, sondern erstmal trocknen lassen. Im Nachhinein werde ich schauen, wie ich mögliche Schadensbegrenzung betreiben kann. Die vier gesunden Pflanzen werden in einem geschlossenen Zelt in einem Trocknungsbeutel getrocknet. Die befallene Pflanze habe ich in dem Folienzelt aufgehängt und mit einer Plane abgedeckt. Nach wenigen Tagen der Trocknung sieht soweit eigentlich alles gut aus. Die Eier scheinen nicht mehr zu schlüpfen, sondern fallen von der Blüte ab oder verschrumpeln zu Kompost. Ich hoffe, dass es dabei bleibt. Der Geruch hat sich nach dem Abschneiden deutlich verändert. Schon nach der kurzen Trocknungszeit kann ich einen intensiveren Geruch feststellen, der sich noch nicht so richtig beschreiben lässt. Die Blüten waren stark mit den sogenannten "Sugar Leaves" verwachsen, weshalb ich sie grob getrimmt habe, um sie zum Trocknen aufzuhängen. Nachdem die Blüten vollständig getrocknet sind, werde ich die Buds noch einmal einzeln trimmen und durch meine Trimm-Maschine von Vevor jagen. Der Ernteprozess hat zu zweit circa eine Stunde gedauert. Die Pflanzen waren zum Zeitpunkt der Ernte noch sehr gesund und kräftig. Die Verwurzelung war trotz des geschlossenen Topfes sehr gut. Die schönste Bud hat definitiv die zentrale Pflanze, Greta, ergeben. Nass hätte ich den Bud auf mindestens 12 g geschätzt. Ein Gesamtgewicht des nassen Pflanzenmaterials habe ich nicht ermittelt. Sobald alles trocken und fertig beschnitten ist, werde ich das Tagebuch um den trockenen Betrag ergänzen. Stand jetzt würde ich schätzen, dass der Ertrag aller Pflanzen bei circa 40-50 g liegt, was mich für meinen ersten Grow ziemlich zufrieden stellt, besonders in Anbetracht dieser wirklich sehr simplen Strain. Mehr Infos und Fotos folgen in Kürze, wenn das Curing beginnt. Bis bald! :)
Likes
14
Share
@madlangs
Follow
All going well. Not a single pro 21.1.24 feed 1.5L each 10ml Pk 5-8 4ml/L Bio heaven 4ml/L Acti Vera 4ml/L topmax Bactrex 7 spoons Ph6.1. No up or down
Likes
6
Share
Started LST on day 14. Feeding the plant Seaweed extract. Light set to 50% (approx 48W) and height kept at 12" (30cm) above the plant.
Likes
28
Share
She smell incredible, a very sweet sickly smell. She is feeding very heavily and drinking 3 litres per day. She is only in a 3.8 litre pot! Buds are rock solid and building daily. Love it!
Likes
77
Share
Hello there, 🇬🇷 so the previous week was good with slow but steady growth...the girls were fed with Bio Grow from GHF and some of the Enhancer...they are under a 50W Led,safe and sound,until transplant when they will be moved outdoors... WEEK 3 : "RUN IF YOU CAN" ☠️Day 15...they are forming the 5th set of leaves...strange thing,when I get them out of their cupboard they tend to stretch their leaves upwards...when I put them back they are back to normal...I think it has to do with humidity...thinking of transplanting soon as I can see the roots on 2 of the 3...I started preparing the pots,I put Bio Grow from GHF and the babies will be transplanted there in a few days...just waiting for the weather to be stable as they will go outdoors... ☠️Day 16...💧watering time for my babies...they seem to be very well...awaiting for that transplant...today I was thinking about what to do with the girls in terms of training...what I have decided is that I will perform different techniques for each one of them...one will be left to grow naturally like a Christmas tree...the second will be topped and the third will be LSTed...it is a good chance to compare the final weight of each technique...what stresses me a bit is that these girls will go outdoors during the day and under low wattage Leds during the night...I am used to using an HPS lighting and I don't know if the sun here from my spot will be enough...moreover summer is coming...here in Greece the temps will go above 35° C in July...I guess I have work to do and solutions to find... ☠️Day 17...💧📥transplant is here...the girls were put in their final homes, pots of 15 L,and were watered with plain water...I used "Coco Humus" which is coco coir fiber mixed with 20 % manure and organic matter...Its ph is 6,0 - 6,8...I also added Bio Grow, 45 gr for 15 L substrate, and the same quantity of Bio Bloom, both from Green House Feeding... I was a bit confused if I should place the Bio Bloom now,but I decided to do so as these are their final containers...they are 100% organic so I am not worried about any kind of burn... they are now inside under low wattage Leds so that they will slowly get used to their new environment...I may give them some sun in the afternoon...their roots had reached the bottoms of the solo cups,so it was a good time for transplanting...hope they will take it good...I don't like calling them with numbers so I will give them names...We have Angie,Michelle and Lucy...Girls say hello to everyone... ☠️Day 18...its cloudy outside...the girls will stay inside under their low lighted shelter...maybe I will take them outside for a couple of hours just to get some fresh air...transplant was OK for them,no signs of shock or something...they are a bit small but from now on they will have the mighty Sun with them outside...I hope they will boost...Run if you can babies... 💀💀💀...today they survived a massive attack from my son...he probably wanted his toys back from the pots...🤣🤣🤣Anyway,Michelle is a bit hurt on her stem..not something very serious but I have to keep an eye on her... ☠️Day 19...💧summer is here...with temps at 32°C the girls are outside sunbathing...🌞I uploaded a short video showing them off... I watered each one with 500 ml of pure water (ph 6,9)... ☠️Day 20...it's too hot down here...the girls are enjoying the sun but I have a feeling I will have a problem with the temps outside...it's too early too be that hot...32-35 °C... ☠️Day 21....💧last day of the week...the girls are doing fine...I would like them a bit bigger but I think they will catch up...Today I used 6,0 ph water for the first time...usually I don't adjust it,straight from the tap...after a lot of research I decided to give them water at this ph as it is better for coco.I hope the will like it.. So,I hope u enjoyed this week like I did...see u next week..stay tuned...
Likes
24
Share
Day 1 of week 6: 26th Sept Slow start to this week with an update as my phone is broken. Girls looking good but no pics to show.. Day 2 of week 6: 27th Sept Nutes in as usual! Girls looking good and I think the CalMag is working a treat! 🤞🏼 Day 3 of week 6: 28th Sept Just added some pics and a lil vid today to kick this week off after a slow start! Day 5 of week 6: 30th Sept Nutes in again today and some more defoliation due to yellow leaves not getting enough light.. I was a little worried I hadn’t sorted the CalMag deficiency out properly but the girls are looking much happier now I’ve got rid of those yellow leaves and LST’d them a bit more. 😍 Day 6 of week 6, 1st October: Girls looking much happier since yesterday’s removal of yellow leaves and more LST!! They’ve bounced back so nicely!! Happy days 😊❤️ Day 7 of week 6: 2nd October Girls looking good, nutes in for the last time before switching to flower.. Switching to flower 🌹 during week 7 all being well!! Can’t wait to see some cola action!! ❤️, ✌️ and hair grease!
Likes
18
Share
💫 Week 13 | Flower Week 9 – Heavy, Colorful, and Close to the Finish Line 🌿 The BlueBerry queens are reaching their final act — and what a sight they are. Both phenos are standing (well, trying to stand) under the weight of dense, resinous colas that have turned the tent into a living kaleidoscope of colors. Reds, oranges, yellows, and light greens paint the canopy in true BlueBerry style — a visual symphony of maturity, power, and grace. 🌸 Phenotype Highlights Pheno #1 – A soft, vibrant green tone, frosty and full of balanced structure. Pheno #2 – The colorful rebel. Reds and purples showing up beautifully on the leaves and buds, glistening with trichomes. Unfortunately, she gave us a little reminder of nature’s unpredictability — a touch of bud rot on her main top. We acted fast, cut it clean, and saved the rest. She’s drying beautifully now, and the rest of her canopy is thriving. 🌈 ⚙️ Gear in Action Lighting – ThinkGrow Model One + ICL 3300 working together in perfect harmony. They’ve been driving these girls from seed to bloom, bathing them in full-spectrum beauty from top to bottom. Airflow & Extraction – Two 6-inch fans, one from AeroFan and the other from Spider Farmer, keep the air moving. Each one runs with a carbon filter — clean, quiet, efficient. Environmental Control – Everything under the eye of the TrolMaster ecosystem, including the camera that lets us see and record every sparkle in real time. 🌿 Environment & Growth The summer heat continues to challenge the room, and with it, a bit of foxtailing has appeared — likely from heat stress or humidity. But this is part of the story. The girls are homegrown, full of heart, full of life, and we embrace their uniqueness. 🔮 What to Expect The finish line is near. Trichomes are maturing, colors are deepening, and aromas are thickening. We’re watching them closely to decide when that perfect harvest window opens — probably within a week or two. Next, we’ll focus on "flushing", watching the fade, and preparing the final harvest and drying phase. 💙 Gratitude To everyone following this journey — the lovers, the haters, the curious, the growers, the dreamers, and of course our sponsors — thank you. Every comment, every view, every message keeps the energy flowing. This run has been a reminder that perfection is found in patience and care — and sometimes, even in the challenges. 🎥 Everything is documented in 4K on YouTube — come check it out and see these BlueBerry legends shine in full color. #BlueBerry #Week13 #FlowerWeek9 #GrowDiaries #AptusHolland #Plagron #FutureOfGrow #ThinkGrow #SpiderFarmer #AeroFan #TrolMaster #HomeGrow #GrowWithLove 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚
Likes
47
Share
@Sadhus
Follow
**Semaine Harvest : Récolte Finale – Sticky Broccoli (28 avril 2026)** **Note :** Fin du cycle Eternity Grow Cup 2. Récolte effectuée en semaine 10 de floraison (légèrement anticipée). Tout le journal de culture est maintenant complet. ### Contexte et Bilan du Cycle Après 10 semaines de floraison (semaine 14 globale), la récolte a été déclenchée suite à un départ de botrytis sur une autre plante du même espace. J’aurais pu laisser encore quelques jours pour laisser mûrir un peu plus les trichomes ambrés, mais la sécurité prime. La plante dominante (150 cm) a donné un beau rendement qualitatif, avec des buds denses, extrêmement frosty et résineux. **Poids frais : environ 780 grammes** (poids humide total des buds trimés, sans les grosses tiges). Mise à jour prévue dans 2 semaines pour le **poids sec final** après un bon curing. ### Observations à la Récolte - **Buds** : Denses et compacts, très collants. Couverture trichomale exceptionnelle (majoritairement laiteux avec quelques têtes ambrées). L’aspect sugar est magnifique, les buds brillent littéralement. - **Odeur** : Très agréable, sucrée, épicée et florale, typique de Sticky Broccoli. Puissante même après le flush. - **Résine** : Extrêmement résineuse au toucher – parfait pour du dry sift ou un petit Ice-o-Lator. - **Structure** : Belle densité globale, même si la taille individuelle des buds reste dans la moyenne haute pour la variété (pas les plus gros que j’ai vus, mais la qualité trichomale compense largement). - **Santé** : Plantes propres jusqu’à la fin, pas de carence visible. Le flush des 3 derniers jours (EC 0,7) a bien aidé à nettoyer les sels. **Clones** : Quelques clones prélevés plusieurs semaines auparavant ont été repiqués avec succès dans leur nouveau système. Ils sont bien enracinés et prêts à repartir pour un prochain cycle de végétation/floraison. La génétique est conservée ! ### Paramètres en Fin de Cycle (semaine 10) - Température jour/nuit : 19-21 °C / 14-15 °C - Humidité : 48-58 % jour / 29-39 % nuit - VPD : 0.9-1.3 kPa - PPFD : 550 (DLI 24) - UV : 90 min/jour - EC final : 1.0 puis flush à 0.7 (Terra Aquatica seul) - pH : 5.8-6.0 - Steering : génératif jusqu’à la fin - 48h de blackout avant récolte : appliqué pour booster la résine et améliorer la qualité des trichomes. ### Plans Post-Récolte - **Séchage** : 7-10 jours à 18-20 °C et 55-60 % d’humidité dans un espace sombre et ventilé. - **Curing** : Minimum 2-3 semaines en bocaux (burping régulier) pour affiner les terpènes et la douceur. Mise à jour dans 2 semaines avec le poids sec final. - **Utilisation** : Une partie en fleurs séchées/cure, et un petit batch pour **dry sift** + **Ice-o-Lator** (bubble hash) histoire de se régaler avec la résine exceptionnelle de cette Sticky Broccoli. **Tips éducatif final : Le flush et le blackout en fin de cycle** - **Flush** (3 derniers jours à EC très bas) : Permet d’éliminer les sels accumulés et améliore nettement le goût final (moins de chimie, plus de terpènes purs). - **48h de blackout** : Technique simple mais efficace qui stress légèrement la plante de manière positive, augmentant la production de résine et la clarté des trichomes juste avant la coupe. Ce fut un très beau cycle, propre et instructif malgré l’interruption due au botrytis. La qualité résineuse et l’odeur compensent largement. Merci à Zamnesia et Plagron pour le matos ! **#GrowLegendary #Zamnesia #Plagron #EternityGrowCup2 #StickyBroccoli** Dans 2 semaines je mettrai à jour avec le poids sec et les premières impressions après curing. **Estimation du poids sec final** Avec **780 grammes de poids frais** (buds humides, après trim initial mais avant séchage complet), voici une estimation réaliste pour cette Sticky Broccoli : ### Estimation raisonnable - **Poids sec attendu** : **180 à 230 grammes** (environ **23-30 %** du poids frais). **Pourquoi cette fourchette ?** - Les buds frais contiennent typiquement 70-80 % d’eau. - Après un bon séchage (jusqu’à 10-12 % d’humidité résiduelle) + curing, il reste généralement **20-30 %** du poids humide initial. - 20 % → **156 g** (estimation basse, si buds très denses ou séchage poussé) - 25 % → **195 g** (estimation moyenne, la plus courante pour des buds compacts comme les tiens) - 30 % → **234 g** (estimation haute, si les buds retiennent un peu plus d’humidité ou sont particulièrement résineux) Tes buds étant décrits comme **denses, très collants et frosty**, je pencherais plutôt vers le **milieu/haut de la fourchette** : **190-220 grammes** une fois bien secs et cured. ### Facteurs qui influenceront le résultat final - **Qualité du séchage** : Température 18-20 °C, humidité 50-60 %, bonne circulation d’air sans vent direct → perte d’eau progressive et uniforme. - **Trim** : Si tu as fait un wet trim assez serré, le poids sec sera un peu plus bas que si tu as laissé plus de sugar leaves. - **Densité des buds** : Plus ils sont compacts et résineux, moins ils perdent de poids relatif (mais ils sèchent parfois un peu plus lentement). - **Curing** : Pendant les 2-4 semaines en bocaux, tu perdras encore un peu d’humidité, mais le poids se stabilisera. ### Prochaines étapes 1. **Séchage** : 7-10 jours jusqu’à ce que les tiges cassent net (pas pliables). 2. **Curing** : Minimum 2 semaines (idéalement 4+) avec burping quotidien au début. 3. **Pesée finale** : Une fois le poids stabilisé (après 2 semaines de curing),
Likes
4
Share
Another week of slow but steady growth for these 2. Just like with the other grow, I moved from 7l plastic pots to 11l fabric pots. The extra size will force me to be more diligent about the height. This one is not an auto so I will probably do a second round of topping, it depends on how fast and branchy these plants end up being.
Likes
Comments
Share
Hi liebe Community and Welcome back! 💚 Die Pflanze konzentriert sich nun völlig auf die Blütenbildung. Die Trichome fangen an zu sprießen und ein säuerlicher Geruch sticht langsam hervor, so wie es gewünscht ist. Die Blütentriebe bilden sich immer stärker aus und die Stigmen wachsen nun vermehrt. Bei diesem Genotypen, ist das Wuchsverhalten weitgehend ähnlich, nur die Hauptwuchsphase war mit etwas kürzeren Internioden abständen geprägt. Ihr Geruch wirkt jedoch inzwischen immer intensiver in Richtung Grapefruit (GMO). Wie beschrieben kommt dieses Aroma stark aus dem GMO Phenoltypen. Die Wachstumsbedingungen im Growzelt sind aktuell wieder super! ——————— 🌞 Temp: 22°C 🌚 Temp: 20 °C 💨 RH: 53% VPD: 0,91 kPa 😎PPFD: 830 mqm ——————— Stay Tuned! 💚
Likes
18
Share
my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 56 days and flowering stage was 75 days total (harvested tops at day 64th) the total weight of dry buds was : (plant #1 & #3 top buds 56 G + lower buds 22 G ) 78 G + (plant #2 top buds 47 G + lower buds 18 G ) 55 G + (plant #4 top buds 120 G + lower buds 67 G ) 187 G = 367 G
Likes
13
Share
Day 29-06/05/22 all looking good looks like most of them are starting to flower!!!! Day 31-08/05/22 all except one have started to flower!!! So exciting they look very well healthy a bit of dropping in pics and video as only just watered them!!!
Likes
7
Share
Alcapulco Gold plants (3) are between 12”-14” and still receiving only pH balanced H2O. The other 2 strains are receiving nutrients listed above.