Likes
Comments
Share
15.08.2025 They started flowering some days ago. They are splendid 🌸 Super-Cropped the Original Afghan Kush for achieving an even canopé, not mentioning the tiny version of Amnesia Zkittlez, which will never reach the canopé of the others. 16.08.2025 Yesterday evening I cropped the main cola of the O. A. K. and this morning 5 am she totally recovered the stem and is standing as before the cropping. Oh, Lord 😅
Likes
116
Share
@Hologram
Follow
goodday growmies, Fire is burning like hell! maybe its bc its very hot here at the moment lately..( can get almost 40C) last night and this morning it was raining so she was in safehouse She is a bit slower than my Candyshop .. i hardly see any trichomes yet But cannot compair.. It can go very fast when ur not looking and suddenly she is done!!(but i dont expect that very soon yet..) Its a very big plant.. but next time i am gonna do some topping and some LST I did not do that this time to just see but now i see, it would have been better if i did .. doesnt matter,..i know she will give me fire buds anyway! 😎👌 Happy growing for all ✊
Likes
5
Share
* Watering 2l every 3 days, no nutrients * Always tuck in the leaves to expose lower tops * Check the trichomes for amber * When amber leave the plant 2 days in darkness before harvest
Likes
3
Share
Starting off this new run strong!!! Loving how fast the sprouties are growing. They look pretty happy to me. Maybe bottled nutes are best for my indoor.
Likes
11
Share
@Teezkiee
Follow
Fastest Flowering I have ever seen, some magic, quickly moved to Ripening
Likes
14
Share
@Terpyboyz
Follow
Hi everyone 👊🏻 thanks for checking in 😏, so we have started flowering this week on the bigger tent using the 2 Lumii 720w LEDs, we might or might not run into some hight issues well see… And we have the other 1.2 tent set up for the clones there under 1 Lumii 720w led delivered until I can another one sorted few weeks 🤙🏻 get them under that for a few weeks then get them flowering as well. Keep eyes open for progress 👌🏻
Processing
Likes
28
Share
@No_Clout
Follow
27/02/19 - This one is great, I popped the seed 24hrs after the gelato and this one seems to be developing its leaves a lot faster than the rest, so far really happy with DNA and with mills nutrients, it’s a lot easier to mix and I no longer have to use ph down because once all mixed it’s at a 5.8/5.9. 👌🏻 02/03/19 - Just transplanted all into their final pot, just in time I think as it looked like the roots were starting to circle at the bottoms of the pot, sprinkled half a tea spoon of Mykos on each hole prior to the transplant & fed them 2.5 litres each. I was going to saturate the whole pot but I’ll do that next feeding.
Likes
6
Share
Plants took a few days to get stripped down. Missed the second week of flowering and stretching but oh well there is always next time. Very excited to see this canopy full of uniform buds its going to be a sight to behold haha.
Likes
14
Share
Likes
55
Share
Some people freeze their defoliated leaves to make other products. Some of mine goes to the doggo… she loves them like treats! 🐶🌱😎
Likes
20
Share
Likes
2
Share
@Iceloc60
Follow
Lil LST and defoliation for whiskey Zulu
Likes
43
Share
@Hashy
Follow
******************************************** Week 8 early flower (flower week 2) ******************************************** Light cycle=12/12 Light Power=218w 90% Extractor controller settings High temp= Day 24c, Night 20c Low temp= c Temp step=0c High Rh= Day 53%, Night 56% Low Rh= % Rh step=0% Speed max=9 Speed min=2 Smart controller settings (during lights on). Lights on=9.00am Top fan on=+23.5c Top fan off=-23.0c Dehumidifier on=+58% Dehumidifier off=-55% or +26c Smart controller settings (during lights off). Lights off=9.00pm VPD aim=0.6-1.6 DLI aim=30-45 EC aim=0.2-2.0 PH aim=6.0-6.5 NPK(15.4/7.2/25) 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= Autofeed 6 drippers. Feed=Flower Nutes. Neutralise=0.1ml/L Bloom=4.0ml/L Roots=0.2ml/L Silicon=1.0ml/L Calmag=1.0ml/L Boost=1.5ml/L Volume=12L Easy Ph down= 0.125ml/L Ec=1.95 PH=6.4/6.5 Runs=17 Run times=4min (276ml each) Gap times=16min Total runtime=68mins (5.0L each) Total flowrate= 138ml/min (69ml/min each) Auto start time=10.00am Auto stop time=3.24pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅7/7/24 Sunday (day 50, day 8 flower) 📋 defoliation on lower nodes and leaves. 💧 Method= automatic Feed=Nutes flower Volume=12L Ec=1.95 PH=6.4/6.5 Volume left=3.5L Volume used=8.5L (138ml/min) Volume each=4.25L (69ml/min) Runoff. Total runoff=tiny amount Ec= PH=/ Feed=manually @3.40pm Run time=4 mins Feed=manually @4.00pm Run time=4 mins Volume left=2L Volume used=10L (138ml/min) Volume each=5L (69ml/min) Runoff. Total runoff=0.7L Ec=3.95 PH=/6.2 💧 📅8/7/24 Monday (day 51, day 9 flower) 📋 📅9/7/24 Tuesday (day 52, day 10 flower) 📋 H=72cm D=27cm Dli=57.2 Ppfd=1323 12/12 Really been pushing it with the light trying to minimise stretch, will raise light tomorrow and adjust power. 📅10/7/24 Wednesday (day 53, day 11 flower) 📋 H=76cm D=23cm Dli=60.5 Ppfd=1400 12/12 Raise light, running out of space. Lowered power to 200w H=76cm D=29cm Dli=45.4 Ppfd=1051 12/12 💧 Method= automatic Feed=Nutes flower Volume=12L Ec=1.95 PH=6.4/6.4 Volume left=2.5L Volume used=9.5L (138ml/min) Volume each=4.74L (69ml/min) Runoff. Total runoff=0.3L Ec=3.3 PH=/6.2 Feed=manually @4.20pm Run time=4 mins Feed=manually @5.10pm Run time=4 mins Volume left=1.5L Volume used=10.5L (138ml/min) Volume each=5.25L (69ml/min) Runoff. Extra runoff=0.5L Ec=4.1PH=/6.2 💧 📅11/7/24 Thursday (day 54, day 12 flower) 📋 Big defoliation on lower leaves and colas that will restrict air flow. 📅12/7/24 Friday (day 55, day 13 flower) 📋 Hst 2 main colas, slightly snapped both. 📅13/7/24 Saturday (day 56, day 14 flower) 📋H=86cm D=20cm Dli=74.8 Ppfd=1732 12/12 💧 Method= automatic Feed=water Volume=12L Ec=0.2 PH=6.4/6.3 (PH D=0.013ml/L) Volume left=3L Volume used=9L (138ml/min) Volume each=4.5L (69ml/min) Runoff. Total runoff=0.2L Ec=3.0 PH=/6.8 💧 ******************************************** Weekly roundup. 📋 Absolutely fine, been growing great, had to apply Hst as she's getting that tall, she's stretched a further 24cm this week and I'm praying she's going to stay as she is, I probably have 10cm max left of room to raise the light. Take it easy. Back soon. ********************************************
Likes
2
Share
Im feeding her steadily at around 825ppm every morning monitoring any possible deficiencies. I did defoliate quite a few leaves from the to[ and bottom once I felt that she is thriving happy and growing more vigorously during the stretch. I raised the light a full 2 feet. during week 1 and now at the end of week 2 the tallest stalk is about 14 inches while most are around 20. reason for a few stalks being taller is because of what happened when our 3rd plant ended up being a male during the transition to 12/12. Im not gna try anything crazy to try and fix it. Obviously there are no problems so dont fix whats not broken I guess. Have a great week !
Likes
4
Share
@UnUlver
Follow
Скоро харв, нормальные новости, пока молочные в основном, жду процентов 20% янтаря. Даю только Ripen. Давно не видно ботов, комьюнити крутится только вокруг конкурсов?
Likes
148
Share
Hello everyone 😇 😇 😇 Finally, the last week and the harvest time come. On Day 105 and Day 107 I flush her with tap water treated with Ecothrive Neutralise. I was planning a harvest on Friday but accidentally initiated it on Thursday, how ?? I wanted to remove the fan leaves, when I began to pull off the wires supporting the branches, the branches began to break... So I came to an unplanned harvest the day before I planned to do it. 🙌 !! BUT !! 🙌 This one day does not really make a difference, so the fact of the branches start breaking under the weight of the buds made me pretty happy 🙏 🙏 🙏 Thanks to everyone for the comments, likes and interest. Soon another stage of my adventures, this time starring: Think Fast and most likely Auto Banana Blaze of course from Dutch Passion. Have a nice and quiet Sunday, You Lovely Girls Growers 💪 💪 💪
Processing
Likes
2
Share
G41 8/9WK IN FLOWER STR8 INSANE CORNETTO SUNDAE ICE CREAM TERPS BEST PHENO G41 I EVER HAD FEED COMPOST TEA N SST TEA
Likes
25
Share
🍼Greenhouse Feeding BioGrow ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Likes
3
Share
@Chimken
Follow
At the end of Week 4 (vegetation) the plants stretched and got some height. I still can not assess if they are doing normal, good or great :) I am starting bending the branches in a special way using the holes in the circle of the pot and gardening rope. The left and central plants are definitely ready for this.
Likes
6
Share
@Averynate
Follow
Marijuana cultivation, like any agricultural endeavor, involves various techniques to optimize growth, yield, and potency of the plant. This is the week to make it happen! One such advanced technique is High-Stress Training (HST). HST is employed to control the growth pattern of the marijuana plant, making it more bushy rather than tall. This is beneficial for indoor growers with limited vertical space. Moreover, HST exposes more of the plant's foliage to light, which can lead to enhanced photosynthesis. This results in a plant that can produce more buds, which are denser and more potent. Given that light is a primary energy source for plants, maximizing light exposure can drastically improve the overall quality and quantity of the harvest. Topping is a specific form of HST that involves cutting off the main stem's topmost growth. This method forces the plant to divert its energy and nutrients to the lower branches, promoting the development of multiple main colas instead of a single dominant one. By encouraging a more even canopy, topping ensures that light is distributed more uniformly across the plant. This reduces the chances of having underdeveloped buds at the lower sections of the plant due to light deprivation. Topping also curtails the plant's height, making it more manageable, especially for indoor growers with limited space. HST and topping are integral for modern marijuana growers seeking to enhance their yields. These techniques address the spatial constraints faced by many growers and ensure that the marijuana plant receives optimal light exposure. The end goal of these methodologies is to increase yield and potency, and when done correctly, they can transform a mediocre harvest into a bountiful one. Cultivators who invest time in understanding and implementing these techniques stand to benefit significantly from their marijuana crops.