10/10/2022 - 64 days since my little girl sprouted from seeds🌱 Fifth week of flowering for my Bruce Lemon Diesel 🍋⛽🌻 Nutrients: Jungle Indabox - this week I keep serving and adding Jungle Indabox Environ X - bud stimulator 🌼🌸🌼 Advanced Nutrients - Big Bud - I canceled the bud stimulator mix and stayed with Jungle Indabox because the girls got a little burnt, the classic brown color appeared on the tips of the leaves 🍃🍂 I stuck with Bud Candy, all my girls need plenty of carbs 🍭🍭 Atami - ATA Calmag - when growing under LED lights it is recommended to use Calmag and Atami is an excellent brand Training: With Orange Sherbet, I didn't do as much defoliation as with BCN, it wasn't necessary, I mainly cut off the large leaves that shade the light 🍃🍃 LST: some of the strings I used to attach the twigs to the edge of the flower pot loosened, so I had to re-tie them 🌴🌴 Light: Believe - the best light of sponsor Mars Hydro TS 1000 💡💡 In general: The plant is strong, manages nutrients well, absorbs as needed. The buds form along the entire length of the branches, they are dense and it is already clear that there will be many of them. All branches are full of buds and already form a big "Hammer" ⚒️😁😁 She Is in full bloom, I expect her to bloom for at least another two weeks 🏵️💮 It smells really wonderful, she revealed her typical sweet smell with a hint of diesel 🍇⛽🍬 Thanks for the likes and you can follow me on Twitter 🐦: @ Targona666 See you soon 😍

So far so good, drinking almost 10 litres every days which is insane. As my Wilma grow diary the humidity is a touch high as I shared the same tent.

2/10: I watered today with about 3/4 gallon each, plus cal-mag, signal, bembe, armor si, a little open sesame, and their final dose of endoboost. The short one never did stop making the hook leaves on all her new growth, but she seems happy..budding faster than anybody else.. 2/11: Wife home sick today....postponing construction project to raise the lights. 2/12: Today, I tackled the project to raise my ceiling another foot. In addition to that project, I installed and hooked up my new AC Infinity 6" intake fan. It's pulling in fresh air from the soffit vent on the eave of the attic, and currently feeding the garden with 46f fresh air. I'm able to easily maintain daytime temps in the lower 70f's now. I am able to drive the nighttime temps as low as I want. The only issue is that the outdoor RH varies quite a bit, so I ordered a 30-pint dehumidifier to put in the top of the closet. I sprayed everybody with boomboom spray to try and mitigate the light burn damage that is likely to ensue. 2/13: The taller one is still stretching a little bit, but the 2-footer is just budding up. 2/14: I fed them today with about 3/4 gallon each including grow big, big bloom, tiger bloom, cal-mag, signal, bembe, humic acid, and I switched over from Open Sesame to Beastie Bloomz. Raised the lights another couple of inches. I did some training on them and defo'd a little bit. 2/15: Installed the new dehumidifier and rigged the continuous drain on it...works great. 2/16: I rotated the edge plants and removed some old leaves. I added another 22w 3000k 4' bar light under the canopy. 2/17: I rearranged the garden and defoliated a little bit. That's it for week 8-

Day 57: Watered each plant with 1L with nuts 1588 ppm, 3380 us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1690 ppm, 3595 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 60: Watered each plant with 1L with nuts 1563 ppm, 3325 us/cm, 3.3 EC Day 62: Watered each plant with 1L with nuts 1726 ppm, 3712 us/cm, 3.7 EC (purple punch, strawberry banana, wedding Cheesecake)(I gave them more than usual, by mistake) 1528 ppm, 3525 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 63: Watered each plant with 1L with nuts 1563 ppm, 3325us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1523 ppm, 3301 us/cm, 3.3 EC (gorilla cookies) 2 different feedings for the 10 plants Day 65: Watered each plant with 1L with nuts 1518 ppm, 3210 us/cm, 3.2 EC (purple punch, strawberry banana, wedding Cheesecake) 1359 ppm, 2891 us/cm, 2.9 EC (gorilla cookies) 2 different feedings for the 10 plants Next feeding I will start to flush some plants, 1st week with flawless finish, 2nd week clean water, 10x the pot, 150L each Day 67: Watered each plant with 1L with nuts 1379 ppm, 2908 us/cm, 2.9 EC (1 purple punch, wedding Cheesecake) 1250 ppm, 2687 us/cm, 2.7 EC (gorilla cookies) 285 ppm, 606 us/cm 0.6 EC (3 strawberry banana and 2 purple punch) (2L each) 3 different feedings for the 10 plants Started to flush all the strawberry banana and 2 purple punch with flawless finisher. (1st week flawless finisher, 2L each, 2nd week clear water, 150L)

Bueno familia ya finalizamos, estas red hot cookies son una cepa bestial. La verdad que el secado muy bien 7 días en Malla y a los botes, 45% humedad y 23 grados es la temperatura ambiental que han tenido en el secado. 4 plantas que se cultivaron en un armario de 1.20 pero estos ejemplares solo ocuparon 80x80. Así que ya está cultivada esta gran variedad que es novedad este 2020, americana de la familia Cookies, la Tropicanna Cookies (Girl Scout Cookies x Tangie) con un porcentaje de thc entre los 17/25%, una bomba. Que decir de Agrobeta, lo peta 💪 en cuanto a nutrientes. Un saludo y buenos humos.

Primera semana en un sustrato malo del cual fue trasplantada la siguiente semana

Weekly update on these beautiful ladies. A little late on the update I was out of town for the weekend and couldn't get to it before I left. They're Growing amazing and wow did i come back ti a jungle. They'll definitely be getting a defoliation and lollipop this week as it's needed. All in all Happy Growing

Coming along

Good day to all my friends and visitors here on GD. The finale grow week for the first Tropicanna XL is there (the one by the wall), she came out just lovely and the smell is mad. I could use it as perfume it's so rich and fruity, never had a plant with such outstanding fragrance. This week we start of changing the reservoir water to which I decided to add nutrients. Yes, this plant will not get a flush before harvest, it's the first time i'm not flushing a plant for the cut but you know only two of the four girls are ready to chop and it's not possible in my RDWC to seperate feed them. So yes it's kind of an experiment for me...some time ago i heard that "man does not need to flush"... yeah I don't really believe what the white coats tell us but then we watched Dr Bruce Bugbee stating the same thing and he quoted experiments performed by his team... I believe him, and I don't really have much choice. Something's not right with my fresh solution or the plants get root rot or something but the girls starting to show K deficiency...I ended up adding an insane amount of PK through the week...good that the plants are on the finish line :) The SE7000 runs at 550 Watt and about 33cm from the canopy and is doing an astounding job. For anyone who is interested in obtaining this efficient and affordable light fixture here's the link: https://spider-farmer.com/products/spider-farmer-upgraded-se7000-730w-commercial-led-grow-light/ That's it friends, I hope to see y'all next week, bless.

Draft

Moved into the corner now, with just enough room and out of the autopot tray 📤 Smelling dank, doughy, hashy, citusy, floral fruity Removed all training clips ✌️💚

I accidentally snapped off a branch during the transplant from 3 gallon bags to a 5 gallon bucket, attempted to clone it but, to no avail. I’m gonna consider that some inadvertent HST.

Smooth

I am now flushing her with plain Brita filtered water PH'd with lime juice to lower her PH. I initially first flushed her with 42L of water and now I am flushing her once a day for 8 days and then I will put her in for darkness for 3 days and then I will harvest her and dry her for 9 days and then cure her for 28-48 days.

Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

Matilda has stopped making new fan leaves and started stacking on colas now. She has definitely stepped up her loudness as well. I could just sit in the tent and enjoy her complex; fruity, funky cheese, darkness all day long. I still have 4-5 weeks until I even think about harvesting.

Start of week 5 (day 1) 8/20/25 Flushed with sledgehammer: 8/21/25

Last week before these babies swell😍

Large golf ball size round nugs all equal size top to bottom

This week temperatures are really high here, more than 3 days above 30° C (86 F) I increased the watering amount to daily frequency. I use raining water that we collect in garden I also added few grains of fertilizer Nitrophoska in each pot, mixed with the soil and provided water. Plant #1 is now 69cm (27 inches) Plant #2 is now 68cm (27 inches) Plant #1 is now 47cm (18,5 inches) Now they all display 9 pointed leaves on new growing leaves of the central stem.