Starting to see purple in the buds! Completely covered in trichomes. Dropping temp to 61 at night. Excited for harvest. Smells sooooo good in here. Covered in purple now. Loving this color change. Super stanky!! Cannot wait!!

Small red spots have started only on black cream

Harvest after 77days, before harvest she get 8 days only water and 1time flush 60l. Easy grow, and she have a nice smell Soon update

Posting the phenos when I do them

Culture facile sans aucun soucis belle plante tres esthétique une merveille pour les amateurs de gout fruité

Guter strain und der Geschmack ist auch ganz gut aber es gibt deutlich besseres

Nice smell already The frost is insane this earlyyyy Mid week: the frost and smell is going crazy never seen this before

Pues aquí tenemos la tercera semana de las PurpleKush de la familia de Kannabiaseeds. En está semana las he trasplantado a macetas de 12 Litros, todavía se están recuperando del trasplante. 😘😊

---------------------------------------------- ~Sweet Seeds Sweet Zenzation (SWS84)~ ---------------------------------------------- Zkittlez is one of the most famous and potent strains found on the west coast of the USA. Sweet Zenzation (SWS84) derives from a cross between an elite clone of Zkittlez combined with a specially selected Grape Ape clone, which is one of the strains used to develop the original Zkittlez. The result is a predominantly Indica genetic hybrid. It produces a large amount of resin-soaked flowers. It is both relaxing and stress-relieving, yet it also stimulates the imagination and conversation, an effect that is normally associated with sativa strains. The flowers have a high terpene content, an exquisite aroma and sweet taste, with hints of fruit-flavored candies, hardwood undertones, shades of lemon, cypress and subtle aromatic peppers. Variety: Sweet Zenzation (SWS84) Indica: 70% Sativa: 30% THC: 16-23% CBD: 0.2% Indoor Yield: 450-650 g/m² Outdoor Yield: 400-700 g/plant Effects: Creativity, Stimulating, Happiness, Relaxing Taste: Spicy, Fruity, Citrus, Lemon, Candy, Cypress, Sweet ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ THE SETUP: ~Planted into Jiffy Peat Pellets that were hydrated with de-chlorinated water with SuperThrive added then ph'd to 6.0 @ 80℉ ~Grown 100% organic in 10g fabric pots with Mother Earth 70/30 Coco/Perlite medium amended with 2tbs/g of Down To Earth 4-4-4 / 2 cups/g of Earthworm Castings / 1tbs/g of Dr. Earth Flower Girl 3-9-4, 1tbs/g of Dr. Earth Bat Guano, 3/4 cup of Down To Earth Azomite and 1 tsp/g Down To Earth Fish Bone Meal. ~24hr light cycle during Germination / 19/5 light cycle for Vegetation and 12/12 for Flower ~Straight water ph'd @ 6.2-6.8 when needed and weekly Compost Tea's. __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/11- Week Nine! Here we go on our way to sticking a fork in this run! Her fade is in full swing and she's putting out trichomes like crazy! By the end of this week she'll be hanging after she spends a couple of nights in the dark. I watered today using straight water that's ph'd to 6.5-6.7 @ 72℉. I gave her a little over 1.5g to keep her flush going and then turned her pot. Trichome status: 70% milky / 30% clear 10/13- I watered today with 1.5g of straight water that was ph'd to 6.5-6.7 @ 72℉ and gave her pot a turn. Her trichomes are almost where I like them and more than likely she'll be going in the dark by the weekend! What a beautiful cultivar she is! 🤩💚 10/15- My routine of watering every other day continues. Yesterday I watered her with her usual 1.5g of straight de-chlorinated water that was ph'd to 6.5-6.7 @ 72℉ and gave her pot a turn. Today was just spent checking her over, turning her pot and doing a quick check of her trichomes which are close, but not quite ripe enough yet! 10/17- Wow!... Nine weeks of flower DONE! 😎👍 Now my sights are set on getting this girl finished up and on her way to 48 hours in the dark before she's hung to begin drying. I went ahead and watered her with her usual 1.5g of straight de-chlorinated water that was ph'd to 6.7 @ 72℉ and checked her trichomes, which are looking just about right! This journey is coming to a close in the next couple of weeks with her harvest, drying and trimming up. I so appreciate you following along with me , it's been a blast sharing with you all! 😎🙏 ~Thanks so much for checking out my diary! This epic run is in the home stretch with harvest fast approaching...Stay lifted and be Blessed! 😎🙏~

* Week 6 Flower Mimosa (1 -2) - 10/8* Both Mimosa's are near harvest about a week left, Lotus CarboFlush will begin this week. Mimosa (1) - 38 Inches - Mimosa (2) - 28 Inches. Trichomes have set in - Pulled off trellis net this week * Pre-Harvest set-up - 10/15* Both plants have been cut down and are drying out accordingly (Day -1) Dry time will be 9-14 days - Dry temps are 60% Humidity - 62 degrees F.

Girls are growing up nice! Went from the solos into the 1 gal pots. OG3 is looking a little droopy, maybe shocked from the transfer. Other two look to be on the money so far. Glad to be back with the photos, being able to control the timing to flower is a great feeling. When my flower tent is freed up in a week or so, I will be moving them over to their final home.

Buenas, Esta semana ha ido bastante bien con un crecimiento muy bueno como pueden ver, al menos desde mi punto de vista pues es mi primer cultivo. Ahora los días de entre-riego se están acortando, lo que es una buena señal pues quiere decir que la planta esta bebiendo como nunca y su sistema radicular es sano. Tuve problemas con insectos que se fueron comiendo algunas hojas, sobre todo las de nueva formación las cuales no estaban bañadas en el preventivo que uso, pero las pille a tiempo y decidí pulverizar la mezcla de agua con tierra de diatomeas y neem en polvo, por eso ese aspecto blanquecino de las hojas, y la verdad es que desde entonces no he tenido problemas estos días, a ver si sigue surtiendo efecto. Gracias por leer y ya saben cualquier consejo me dicen ya que son bienvenidos amigos. PD: me siento como un médico escribiendo la historia clínica del paciente 😂

Tag 46: Ist leider etwas zu groß geworden für meine Box 😬

Using a Rhaspberry Pi 4 to automate the watering and a TP-link 105 smart plug to automate the Viparspectra P2000 LED grow light. You can see how I automated it here: https://hackaday.io/project/188129-rhaspberry-pi4-basic-watering-system-for-balcony Basically, this is an "Automated Watering how-to Guide for Dummies" - as simple as technically possible. You still require some basic command line expertise, but the steps have been proven and I provide links to the gear I used AND the Node Red code, making this EASIER than anything else I've seen online.

Northern lights grew great in the Pro-mix medium size hp bag. She had a struggle through the grow. She really wanted more space to root. I did have a salt build up towards the end of vegging. A few minor issues beside that. She did fill the little Spider Farmer tent. She turned out great. Thanks again Pro-mix, Medic Grow, Spider Farmer, and Divine Seeds. This wasca slightly different style grow compared to my usual methods using the Pro-mix. I really enjoyed it. 🤜🏻🤛🏻🌱❄️ Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

🌱(BT 40) 🌱Es sind verschiedene phenos zum Vorschein gekommen aber sie entwickeln sich bisher super 👍 Es gibt keine großen Veränderungen in den zusätzen☕ es geht weiter mit @Hesi_Official Dünger und die rlf Passt auch wieder wie gewünscht mit der ich zwischenzeitlich etwas zu kämpfen hatte aber das ließ sich gut gegensteuern mit der Infrarotmatte 👍 AKF von @VIVOSUN hält auch stand ohne zicken Bis dato Links die XS 1500 pro mit 36 cm Abstand und 85% Leistung derzeit✅ Rechts die M100 Pro von Wizard of Bloom mit 31cm Abstand und 100% Leistung ✅ Mir persönlich gefällt Spektrum und Vitalität sowie Performance unter der M100 etwas besser der Wuchs ist bedeutend kompakter und die Blüten gehen fast bis zur Erde das ist echt Wahnsinn 👍✅☣️ Die Research Reihe von @SensiSeeds läuft bisher ohne große Probleme und es ist eine Freude zuzusehen 😁

Vamos familia, actualizamos la primera semana de floración de estas Permanent Maker de Seedstockers. La temperatura que estuvo entre los 24-26 grados y humedad dentro de los rangos correctos. Esta semana cambiamos a 12 horas luz,12 horas de oscuridad, estiraron bien y ensancharon bastante también, el color es verde sano. Se nota que los nutrientes de la marca Agrobeta hacen sus funciones, añadí ya las dosis de floración. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

day 15: flowers start to appear day 16-17: temps go 24 celcius, i throw ice bottles in the res day 25: insane stretch stops flowers fatten up, even crystals around the young budz.