Day 120- Day 72- 11/11 - Still just giving that liter of plain, non pH'd RO water every morning. - Again, not checking ppms in or out anymore, she's ready Day 121- Day 73- 11/12 - Gave 1 liter of water Day 122- Day 74- 11/13 - Gave her last liter of water this morning - Tis her last day! Will cut this evening.

Got better at week 8 end. Finally lots of trichomes, buds are gettin denser last couple days. Made a couple of pure water waterings between nutrition. Defoliated hard and seems like this is last time before harvest. Please share any thoughts/tips on better growing this baby👇 Peace🙏

Ill update this more as I continue to cut down, dry, trim, and finally squish!

Going really well moved lights up so still sitting 18" above highest point and keep LSTing, tucking and defoliating regularly she looks good... I Think.

🌱: started this week with intensive LST and little Defoliation, Day 46 Lollipopping 💧 : 8l, 10l SIP 💡 : Dli: 45 mol/m²/d, 🤔: The plant has a rectangular area in the middle where it is not growing as quickly. The difference is almost 10cm. I suspect the lamp. Could it be that the centrally installed UV LEDs are triggering it? I noticed this in previous grows. There is actually less light outside, which can lead to slower growth or even stretching, right? I taped up the LEDs.

Room continues to pump out growth. HEat and humidity were an issue this week, but was managed with multiple garden visits and some air diversion. Extremely impresed with all genetics in the garden and there has not been any growth issues to date. 5 weeks complete, another 5 more to smoke. Thanks for following. See GreenMachine's diaries to see how to really grow In House Genetics

Got 2303 into her final home in a 3 gallon pot, I used grow dots at 1 table per gallon of medium and made the bottom 3rd of the soil a little hot with fresh ocean Forrest soil, and purple cow non manure compost.. and moved her to my new ac infinity 3x3 tent!

I’m just happy I’m this far along with these two! Well I’m shocked that one of them is still trying to stretch so late into the grow. Otherwise I’m excited for flowers.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

The first day of the sixth-week flowering🤗

Hello everyone. We're doing well, we've been growing for 7 weeks and we're blooming, the binge has gotten stronger, the bumps are getting more and more. We've added more of these supplements from Xpert Nutrients. Bloom Booster Sticky Fingers .

A couple more days and she will be ready.

Es wird langsam großartig🌱🌿 Die Trichome Entwickeln sich immer intensiver. Mein Bonsai im Living Soil. 🌿🌱🐛

All 3 sprouted after 48 hours with the papertowl method @ 75°F Stay tuned