Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
@Yan420
Follow
🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 Hi and welcome to another Kannabia grow! This time I’m running their Apple Fritter (feminized photoperiod). She’s going to veg under 24hr light and be manifolded. Still cleaning the rest of my Candy Cream GF (11.04.25) — going to sow the seed tomorrow (12.04.25) *been lazy, sowed on 14.04.25 🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 --- 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 12.04.25 (GW1) – Cleaning + flushing the old coco coir. Might need to add another brick. *No new brick needed ✅ This is how I recycle my coco coir — fast, cheap, no BS. 🌿 Harvest plant ✂️ Chop roots small — they stay in for structure (organic perlite) 💦 Hot water rinse — remove salts & dust 🍶 Pre-soak with light feed:   Micro 10ml   Bloom 0ml   GreenBuzz 10ml   Cal-Mag 60ml   FFJ/FPJ 10ml (new disgusting batch)   pH down (citric acid) ♻️ Media stays — Roots stay — Back in service. 14.04.25 (GW1) – Planted seed in final pot ✅ 16.04.25 (GW1) – Did last tent clean up + setup ✅📸 17.04.25 (GW1) – Seed germinated 🎉📸 — roughly 48hrs in final pot. Solid start👌♥️ 23.04.25 (VW1) – Minimal burnt tips 📸 — not progressing, not a concern. 26.04.25 (VW1) – Started using the new batch of FPJ/FFJ https://growdiaries.com/diaries/266849-grow-journal-by-yan402 30.04.25 (VW2) – Increased TriPartMicro & GreenBuzzBloom 10ml → 15ml 03.05.25 (VW2) – Increased TriPartMicro again 15ml → 20ml, topped the plant, and added final layer of clay pebbles around the base, trimmed side branches and did LST in preparation for "manifold" 📸 08.05.25 VW3 finished manifold📸 13.05.25 VW4 Increased TriPartMicro to 30ml and GreenBuzzBloom to 20ml. 15.05.25 VW4 Done defoliation and LST 📸 18-19.05.25 VW5 pruned all the shoots bellow my "mains" and did a full defoliation📸 24.05.25 VW6 increased GreenBuzzBloom to 30ml 04.06.25 VW7 did a cleanup📸 11.06.25 VW8 increase TriPartMicro to 40ml 17.06.25 (VW9) – Final structure pass 💈🌿 Did a clean perimeter prune + removed weak shoots. Ended up with 12 tops, was aiming for less, but she made the call Didn’t fight it, just shaped it the best I could Airflow’s good, structure’s stable 🛑 No more cuts until post-stretch Pics coming shortly 😘 Flip coming soon — we’ll see how she handles it. 20.06.25 VW9 Switched lighting to 12 hours, may the stretch begin 🤞 22.06.25 VW10 Did a good LST session,made some pics, and came to some conclusions and a small change of plans: Originally planned for 8 mains — long, spaced colas and maybe a couple stronger “titans” if she wanted to go that way. But she’s showing me something else, and I’m not here to fight her — just guide her. Now after stretch, I’m keeping side shoots only if they: Fill real canopy gaps Don’t crowd neighboring tops (minimum 15cm spacing) Aren’t growing into walls or toward the next plant Anything too close, too low, or heading into shade gets removed. No point forcing it. Looks like I’ll finish with 14–16 solid tops, depending on how she settles. I’m just trying to give each one enough light and space to stack properly. No overcrowding, no larf — just letting her do her thing with a bit of structure. Increased Tri Part Micro to 50ml as well. 28.06.25 VW11 one week since I flipped to 12/12 and she is stretching nicely, a bit shy in showing pistils compared to the Fantasy Feast regulars I have in the same tent. 29.06.25 VW11 increased GreenBuzzBloom 30→ 60ml 06.07.25 FW1 TriPart Micro: 50→ 30ml TriPart Bloom: 0 → 20ml Home-made FFJ/FPJ (Watermelon + Pumpkin): 10 → 30ml 12.07.25 FW1 GreenBuzzBloom 60 →40ml, TriPart Bloom: 20 → 60ml, fpj 30→60ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 11.07.25 FW1 – Fed 5l of #1 25% strength → 2l runoff 12.07.25 FW2 – Fed 5l of #1 → 2l runoff 14.07.25 FW2 – Fed 5l of #1 → 2l runoff 15.07.25 FW2 – Fed 5l of #1 → 2l runoff 16.07.25 FW2 – Fed 5l of #1 → 2l runoff 17.07.25 FW2 – Fed 5l of #1 → 2l runoff 18.07.25 FW2 – Fed 5l of #1 → 2l runoff 19.07.25 FW2 – Fed 5l of #1 → 2l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 – Week 11 Veg 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 15 → 20 → 30 → 40 → 50ml → 30ml (1.00ml/L) 🍶 TriPart Grow: 0ml (0.00ml/L) 💧 TriPart Bloom: 0 → 20 → 60ml (2.00ml/L) 🍶 GreenBuzz Bloom: 10 → 15 → 20 → 30 → 60→40ml (1.33ml/L) 💧 Cal-Mag: 60ml (2.00ml/L) 🍶 Home-made FFJ/FPJ (new batch): 10ml → 30→60ml (2.00ml/L) 💧 pH Down: Citric acid (buxXtrade) 📦 TOTAL: 250ml per 30L 🔬 8.33ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ --- 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Apple Fritter (Kannabia Seeds) 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Species: 50% Indica / 50% Sativa Genetics: Sour Apple × Animal Cookies THC: Up to 25% Effect: Euphoric, relaxing, creative Flavor: Sweet, fruity, pastry notes Flowering: 56–63 days Resistance: High Indoor yield: 450–500g/m² Outdoor yield: 600g/plant Structure: Strong, bushy, dense buds
Processing
Likes
10
Share
Start of week 3! All three plants have had great bud site development during the last 2 weeks. The Super Lemon Haze is a bit thirstier than the Blueberries, so the Slh got and extra 2 liters of feed during week 2. The Slh is also showing deficiency, hopefully with the addition of B52 to the feed cycle, she'll come around. On th blueberries, there has been some rust spots appearing on the largest leaves, I removed the worst one's and will monitor more closely this week, if that issue continues or not. These babies are very bushy, they take up 80% of my grow room space, very excited about this grow and these plants.
Likes
8
Share
Hey Growers, Day 1 of Week 10 Two ladys harvested today you can see in fotos how they look in my opinion Amazing Hahah (but im the father lol). Purple one its like a mix of exótic fruits The orange one its like a a cream of a fruit. Both seens very sweet!! Soon i Will share strains!! The another two ladys more sativas i think , looks like they need around more 10 days lets us see. The taller one smeels like gasy citrus, And the another one its a mix of strwaberry And another touch that I dont discover yet. Thank you all. Nice week 4 everybody!! _GrF_
Likes
8
Share
@Piro420
Follow
Had to chop a few tops after 90s did not slow them down. Can't really bend em either they snap because of silica.. Snapped about 6, I was able to bend15 w/90s and cut 7 tops... Right in the lights. :/ Should still get plenty to smoke until next run.
Likes
116
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 😺💡🌱 Start week 4!! Plants seem good but 2 are still looking a little hungry,.. there was little change in their color 3-4 days after their last feeding so we fed them again but set PH to 6.5 this time to see if this helps them take it., we also gave 2ml/gal bloom solution to all plants..these seem a little on the small side but we've had a few auto strains start out this way before, i guess time will tell! 😺👌...The MarsHydro is running super cool in that tent, temps have looked great since fixing the timer issue..we'll be sure to update again midweek..thanks for stopping by and happy harvests everyone!! ❤️❤️❤️ ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 11/9/21 😺 We moved the MarsHydro again to approx 18inches, I think this is the sweet spot, all the girls are praying again..I found a PAR chart done by a different grower at 19inches using the SP-3000 and numbers are incredible (I included a pic if his results)...we've been giving all plants 2ml/gal grow solution with every watering, i know its trace but I've overfed way too many autos and just assume play it safe..one of the autos is further along than the rest and she's now showing a little calcium deficiency, we added 3ml/gal calmag with her last feeding and will just monitor for now..thanks for reading my novel lol and happy harvests everyone!!! 😽 💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
34
Share
@Ashbash
Follow
Very slow growing this week (even thought it was a long one as I was counting days wrong) but i think its entered flowering. Its definitely stretched a whole lot. Side branching is pretty nice on both plants so hopefully it'll be a decent yield considering the pot size. Gonna stick with 10 litre pots now. Adding in more bloom nutes seems to have helped clear up the spots so i'm grateful for that. Gonna keep feed at this level until the biobizz runs out in a week or two. Heat is still an issue as you can see from the leaves taking on the classic taco shape. I still have a small 4 inch inline fan that im not using, would that be better for temps than passive intake? But still, good progress considering it's pushed 40c a couple of times.
Likes
4
Share
El viernes 21 regamos foliarmente con Delta 9 preparándolas para floracion
Likes
20
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie erhalten 25 Prozent Rabatt in unserem Shop Mindestbestellwert beträgt 75 Euro https://greenbuzzliquids.com/en/shop/ Code: GD42025
Likes
3
Share
@Muxa752
Follow
Все идет по плану , шишки пухнут ,появился характерны запах , в целом идет ленивый гров . подчищаю листву понемногу , стабильный полив ,хорошие условия , больше ничего не нужно )
Likes
6
Share
Zoap shot up like crazy she easily grew around 7 inches. The bud sights are getting nice and pronounced, she is really starting to explode! I have done vary minimal trimming to her and lst because I flipped her into flower so fast. I believe that she will still give me a decent amount. Can’t wait to keep you all up to date till then see you around growmies ☮️ 08/21/23
Likes
5
Share
@pzwags420
Follow
The start of week 5 is going well. Blueberry is smelling nice and my seedlings should be showing preflowers soon.
Likes
4
Share
@ojulhao
Follow
This week I started training them, maybe too late. I see that one branch on one of the plants broke a little (I think it tried to grow and snapped), but it looks like it managed to form a new connection. It’s a bit weak, though. As you can see in the pictures, I made some strange training while trying to arrange the branches in a better position. I feel I should have done the topping one week earlier and started training before, as it would make it easier and probably lead to better results. Let’s see what happens.
Likes
21
Share
@Siriuz
Follow
Started Week 10 Day 64 Fed them some nutes Day 65 Looking good Day 66 Outdoors for 3 hrs in the morning due to blackout T_T Rested like 6hrs zZzz no lights Day 67 Back to 20/4 schedule Everything is good Day 68 Lil defoliation Got some pics and videos for you all Day 69 Cool Juicy Video Day 70 End of week 10 Overrall she is great! Plan on to give her last meal tomorrow Floranova bloom
Processing
Likes
5
Share
Week 10...The plants are looking good! Took out the microscope to look at the trichomes...Starting to get milky but still another week or two before the harvest! Started flushing the plant this week!
Likes
12
Share
I was still seing signs of of Nitrogen Deficiency [https://www.growweedeasy.com/wp-content/uploads/2010/10/nitrogen-deficiency-yellow-leaf-sm.jpg]. So I increased the amount of Big Plant Science: Part A. I have read that red / purple stems could be a sign of Potassium Deficiency, and since I was going a bit light on Big Plant Science: Bud Explosion, I have now increased the amount in this weeks watering. The lower leaves now appear to lose color between vains instead of the leaves yellowing entirely from the start. This could be a sign of Magnessium Deficiency, and I have just been out to buy Big Plant Science: Aroma Boost, which contains Magnessium. Going to start adding it to the water from next week. Example 1-2: Light green / yellow growth, on top colas on branches hidden from direct light. I am mostly just going to ignore this, and use popcorn buds to try my hands on making Ice bubble Hash.