#1 foliage is mark from the spider mite issue also saw some caterpillar having a feast her buds are still putting weight tho....breed another branch with a different tree also....at least if not able to save buds after treatment should be able to get two different breeds out of her... #2 she is getting fatter by the weeks...might do some trimming up or might jus leave her as she is

After 21 days in turbo cloner I transplanted 4 Sweet seeds Green Poison into 1 gallon plastic pots filled with Cana coco. Few days later I transplanted another 4 clones into DWC! Stay tuned! Coco feed at 700ppm Dwc feed at 480ppm

Banana kush autoflower was a okay grow. She was very hungry and threw my ph off several times. So she had some leaf damage through flowering. She had more potential then I got out of her. Still a good grow and lots of sweet flower. Thank you Medic Grow, and Athena nutrition. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Hola a todos!!, perdón por la demora, pero ando con poco tiempo. He regado con AMAZONIA ROOTS de NAMASTE, 1ml x litro de agua. También he realizado un corte apical en la rama principal. Luego regue , solo con agua. Feliz navidad amigos!!!!

I feed her with full strength of nutes in every 4 days. The leaves are much healthier, so this is the way to go. The smell is lacking which is weird, but hopefully the end product will be fine.

La planta aun está en pleno estirón del inicio de la floración, por lo que tengo que ir cropeandola casi a diario para mantener una altura homogénea en las ramas y que no se estire demasiado. Están comenzando a formarse los primeros brotes, aun no tiene un olor intenso pero ya huele a haze y eso es maravilloso... aun le quedan meses de floración pero ya tengo ganas de fumarmela.

All three girls are officially in bloom! 🌼 #2, our surprise LST candidate (thanks, fan 😅), has now also entered flowering, and is looking strong! #1 has shot up and is clearly the tallest in the tent, stretching like there’s no tomorrow. Meanwhile, #3 decided to skip the gym and focus on curves, she’s staying short but growing wide, even without any training 💪 Overall, everything is going smooth, healthy. Let’s see what these girls bring in the next few weeks!🌱

This week was fully focused on correcting salt buildup and preparing a clean, controlled finish, with quality and terpene preservation as the main priorities. 🔹 Key irrigations – Final Flush was applied with real 30–40% runoff, successfully reducing EC levels in the root zone. – Follow-up irrigation with plain water only (pH 6.2) confirmed a consistent EC drop across all pots. – Plants are now in controlled senescence, with no signs of active nutrient lockout. 🔹 Runoff data Runoff EC is now within safe ranges (≈1.5–3.0 mS depending on plant), confirming the flush worked and roots are in end-of-cycle mode rather than aggressive uptake. 🔹 Environment & light – PPFD adjusted (~700–780 µmol/m²/s) – Stable temperatures – Humidity tightly controlled to protect dense colas Everything dialed in to preserve resin and avoid unnecessary stress. 🔹 Plant status Flowers are fully formed, trichomes mostly cloudy with early amber showing, final structure locked in. At this stage we’re no longer chasing bulk, but ripeness and internal clean-up. 📌 Plan Final days with minimal intervention, observing real pot weight and plant response. Harvest window is very close and right on target. ➡️ Next post will be harvest day and the start of drying. Thanks to everyone following the project and sharing feedback — every cycle is a step forward. 🌱💪

Here we are day 55 for our Wurlz F1 Hybrid. I would immediately like to say, do you notice anything by any chance? I said day 55 and we're pretty much ready. The leaves are turning yellow regularly, I have removed the fertilizers, the pistils are ripe, the resin is out, there are all the signs for a harvest which should take place towards the end of next week. The plants were born on April 6th, I repeat on April 6th for those who cannot grasp the concept. Most certainly Watermelon Candy and Wurlz will be harvested around June 6th, guys...8 weeks...not even 9 or at most nine weeks. If you're good at math, you do it otherwise I'll lend you some fingers. For topping lovers it means that if you want to do topping on autoflowering plants they won't finish in biblical times, according to my calculations even doing topping shouldn't go beyond three months, like an autoflowering from the previous generation. Why am I talking about the previous generation? Because these have certainly moved forward with speed, I have seen them grow and above all swell the flowers like I have never seen them do. As for the rest of the resin and pistils, everything is really in place. I want to do a terpene inspection soon and evaluate the ripeness for the harvest. The Wurlz also ends a little earlier than the others and is truly lightning. Strong, fast as the wind, stable as promised by Zammi. https://www.zamnesia.io/it/10669-zamnesia-seeds-wurlz-f1-automatic.html Feeding is by Plagron with the Power Buds - Sugar Royal - Green Sensation + Alga Bloom combo that drives me crazy https://plagron.com The lights are from Viparspectra p2000 and provide super light www.viparspectra.com/ Tent & Air www.secretjardin.com Music of the week www.radionula.com +++ 432 hz frequencies to keep in line my Girls to Gaia. Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest. www.zamnesia.io

Premiers pistils le 9ème jour de floraison

Hello growers day 43 in the garden she’s getting big she’s starting to so buds but no purple colour I assumed the buds would be purple from the get go but I assumed wrong🤔 hopefully they start turning soon until next week be safe and grow happy✌️🏻

Very easy to grow, doesnt require much nutrients but needs loads of cal/mag in flower. You've been warned, ive had 9 seeds and 9 successful yields so the nimbers don't lie. #420everyday.

Day 36: "Hey everyone! Just a quick update: I removed a few more leaves here and there and did one last round of LST (low stress training). 🌿 The plants are looking great, and I'm going to let them recover now before sending them into the flowering stage. I'm really excited to see them start blooming in 2-3 weeks! Also, a quick update on our temperature issue: today, the temperature stayed below 26.8°C, which is great news! However, we still need to find a solution to keep the humidity levels up. Our 360 m³/h exhaust system isn't able to maintain the required humidity level. I've calculated that we need a humidifier that can evaporate 1800ml/h to maintain 60-70% humidity, which would help manage the temperature better. Does anyone have tips for a good humidifier or other methods to control the humidity and temperature? Any advice would be greatly appreciated! Day 37: Hey everyone! Tomorrow, we're planning to buy some Cal-Mag because we suspect the yellowing leaves might be due to a calcium-magnesium deficiency. We're also going to get a pH test kit to make sure everything is balanced properly. Do you think this is a good idea? Any tips or suggestions would be greatly appreciated! Day 38: Hey everyone! Quick update: it turns out the yellowing leaves were due to a nitrogen deficiency. We increased the fertilizer dosage today, so the plants should start looking better in 4 to 5 days. 🌿 Thanks for all the support and suggestions Day 39: Hey everyone! Another quick update: after increasing the fertilizer yesterday to address the nitrogen deficiency, it should take about 4 to 5 days for the yellow leaves to turn green again. 🌿 We're already seeing improvements! The plants have grown significantly and are developing a dense canopy once more. It's great to see them bouncing back so quickly! Day 41: "Hey everyone! Quick update: we've removed the bands we were using for LST (low stress training) and are now letting the plants grow freely. 🌿 We plan to keep them in the vegetative phase for about one more week before transitioning them to the flowering phase. Excited to see how they continue to develop!"

Auto Flower AK Triple Haze (AK3H) by Super Sativa Seed Club: Day 49 From Seed, 24 days flower. Green, healthy, & stacking up nicely. Especially the Coco/Perlite+Fertilizer plants: AK3H #1 & #2. Coco Buds are pulling away from Soil Plants growing more in thickness & length. Weekly Environment: 79F, 51% RH, 1075ppm CO2, & 1100-1500 PPFD 12hr Lighting.

37 days since my little girl sprouted from a seed🌱 Sixth week of growing my Lemon Oasis Auto 🍋🍋🍋 Nutrients: I use Advanced Hydroponics Of Holland nutrients - three basic components, always according to the table for vegetative growth 💓 - - Dutch Formula 1 Grow - supplies the plant with substances necessary for the perfect development of roots, stem and leaves; intended for the growth phase 🌾 - Dutch Formula 2 Bloom - contains a large amount of nutrients needed for rapid growth and development of fruits, provides energy to the plant; intended for the flower phase 🌸🌿 - Dutch Formula 3 Micro - increases oxygen intake, improves plant immunity, ensures better absorption of nutrients; intended for the growth and flowering phase 🌴 -------------------------------------------------- -------------------------------------------------- -------- BioBizz Calmag - The special Calmag supplement was designed for professional and hobby growers who need to supply calcium and magnesium in organic quality to plants for a long time or immediately. 100% organic 💩💩 and certified BioBizz Calmag product is made from calcium carbonate and magnesium sulfate supplemented with humic acid. -------------------------------------------------- -------------------------------------------------- -------- BioBizz Bio pH- is an organic pH regulator. Aqueous solution of citric acid, which occurs naturally in citrus fruits 🍋🍋 -------------------------------------------------- -------------------------------------------------- ------- During the flowering period, I add Advanced Nutrients stimulators: - Bud Ignitor (first two weeks of flowering) - flower stimulator 🌸🏵️ I stopped giving it now - Bud Candy - carbs for my girls 🍭🍭🍭 - JUNGLE - ENVIRON X is a highly effective complex product stimulate the formation of flowers. Contains no synthetic growth regulators (PGRs). • multiplies yield and increases product quality In general: Lemon Oasis Auto 🍋🍋🍋 - My tallest and most mature girl in my tent. On the sides of the main "stick" grew two long legs (one of which is about 15 cm), full of female sexual characteristics - simply an Alpha female 😁 Otherwise, the girl is growing beautifully, has regular internodes, looks optimal for her age🍃💚 Training: During this period, I usually do another defoliation and LST 💚🌞🌞 Light: Mars Hydro TS1000 The plants react effectively and the light is technically very well managed - I try to have 50cm between the light and the plants, so I move it up regularly 💡💡💡 See you soon 😍💚

Hey guys :-) . Today the plant was sprayed again with neem oil. There weren't any more trips to be seen after the second application, but to be on the safe side, you did it again today get a cure. That's why the beautiful dark shimmer on the leaves :-). She has developed very well this week. I will give you 7-10 days before I switch to flowering. This week it was poured 3 times with 1 l each (nutrients see table above) Otherwise everything was cleaned and, as always, everything was checked. Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

Started flush. 2 weeks till harvest.