Look nice and happy am seeing a bit of brown spots on leaves but I think its because of the high dli will hafto lower it but we will see...

Overall good week finally setup my double trellis net, I hate it because my room so small and I have to crawl all around to get anything done. Plants were looking good a few branches which are completely unnoticeable looked like they suffer from nutrient burn. Beside that we taking off. I’m expecting some significant changes in the coming weeks.

I cannot believe it, 14 days to go then I am going to harvest, I am confident that I would of flushed Lamby quiet thoroughly, for some reason weed needs it’s roots to flushed if you want a super smooth smoke, I wonder if fruit was the same as weed, would we flush the roots to get such tasty and juicy fruit or veggies, or would we bare with that sourness. The real test will be on the 15th of December when it comes to my test smoke, then I shelf Lamby until January after returning from the festive season, by then I would have achieve top tier curing.

What can I say she is coming along nicely. Not showing any signs of deficiencies or nutrient burn. Bud size is the same as a salts run with General Hydroponics Flora Series. Fingers crossed I've got my bloom formula nailed down now. Resolved an issue with fungus gnats and having a small problem with some 2 spotted spider mites, which I treated with some predatory mites which is the reason I had to turn up the humidity as this species of predator mite likes it above 60%.

having trouble keeping the humidity down and running out of room to move my light up. Had some nutrient burn the second and third week of flower think its under control now. Other than that they looking great!

Auto Maxi Gom is doing okay. She is bulking, and looks strange to me. I have not grow this strain before. She should fill in as the time passes. Hopefully it's just my patience and eyes playing tricks on me. She is making progress, regardless and is weeks from done. This has been a long flowering process for a autoflower. 🤞🏻 it turns out okay. Nothing more to report at this moment. Thank you Medic Grow, Xpert Nutrients, and Seeds Mafia. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Got pretty hot in the afternoons when ac crapped out finished outdoors for the last 2 weeks Hang dryed for 7 days at 60°60% now bagged

9/20 Adjusted lights to 40% at 24 inches. It looks like I have a whorled phyllotaxy with the Sticky Mango. 3 branches per node. Should be cool to see how she develops. 9/22 Watered at 900 mS/cm 9/23 Dropped ir light on plants. Broke a fan leaf off the Moonberry Pie Auto. Removed other leaf to maintain light distribution and symmetry. Otherwise plants look great. 9/24 Added IR lighting. 10 before and after lights on and off. Hung at about 48 inches. 9/25 Topped Pink Apple Soda and Yuzu Sour above 4th node. Watered at 1.080 mS/cm pH 6.1. Watered to minimal runoff. Reduced RH to 62% 9/28 Increased lighting to 50%. Topped the Sticky Mango Auto. Was going to get to tall. The whorled phyllotaxy aspect of the plant is interesting. It is definitely growing faster than the others . It even has pistils already and a VERY dominant side branch. The plant I dropped the IR light on (Moonberry Pie Auto) definitely got stunted even though only 2 fan leaves had to be removed. The other topped plants (Yuzu Sour Auto and Pink Apple Soda Auto) look great. Starting to get bushy. Tucked the large fan leaves. Turtle Taffy Auto has been rather disappointing. If it doesn't show me something soon I may not waist the nutrients and get another Tastebudz Genetics seed going. PLANT HEIGHTS : Sticky Mango Auto 12" Turtle Taffy Auto 8.5" Moonberry Pie Auto 5" Pink Apple Soda Auto 7.5" Yuzu Sour 6.5"

Looks like a promising sturdy but surprisingly tall plant. I thought BK was supposed to stay on the shorter side. Regardless I'll enjoy watching her grow & hopefully she'll reward me with beautiful flower. The BK flower I previously had was my go-to night time if I had a migraine strain - worked every single time. I hope this one is the same.

Seedsman Auto Lemon is the 4th round of seeds started in my perpetual garden of auto flowers. So far this plant is growing strong. I expect it to start stretching this week. I also decided to try topping this girl today and will probably bend her next week. Growing in organic composted 'super soil', no additional nutrients added yet. Also as you can see in the pictures there is a 26w CFL (100w equivalent) about 6 inches away - this also helps provide some side lighting to the older plants. Setup: 24x48x72 grow tent 1 Viparspectra V300 300w LED fixture 1 Viparspectra R300 300w LED fixture 1 CFL 100w (26w actual) 4” exhaust fan w/carbon filter 190cfm 6” clip on fan Electric oil filled radiator behind air intake

July 5th : Allrighty then... Got another Video for everyone. Second Attempt adding a music track to the video. Hope you all enjoy! Sure is getting exciting in this tent!! July 6th : Sorry No pics. July 7th : Oh boy did the colors start to come in. How beautiful! Can't Believe I'm growing these. Lowered feed for the week finally. Forgot to do it last time oops.. July 8th : Patience makes the next pics that much better. July 9th : Still couldn't get to photo's tonight sorry. July 10th : Girls are thickening up nicely. Getting antsy just waiting.. Oh the days can't go by fast enough! July 11th : Nothing Tonight But A Video Tomorrow!

Start of week 3, the three survivors are doing great! I did happen to find some algae growing on top of one of the rockwool cubes. (This was my fault for not fully covering the tops of them with hydroton to block out light.) As an attempted fix, I cut some square pieces of black cloth that I laid of the top of the cubes to block out the light completely. Hoping removing their light source, the algae will die off and discourage any further growth. If it gets any worse I’ll try using a hydrogen peroxide solution. Day 17, the three ladies are looking nice. Starting to see some nice healthy roots populate inside the buckets. I went ahead and upped their nutrients today. We will see how they are doing in the morning. -FloraFlex - 1.5g/gal of each V1 and V2. -Advanced Nutrients - 1/2 strength MGB and hobbyist additives. **Algae update: seems like using the black cloth to block out all the light has killed off that algae growth and I don’t see anymore so it’s working!** Day 18, I thought one of my plants had root rot. Which was weird for it to happen that fast in less than 24 hours since changing the res. Come to find out it’s just nutrient stain from the Advanced Nutrients, so thank god. #1 and #2 which are growing with FloraFlex got FIMmed today. I’ve topped plants before but never FIM. Not sure if I did it right, but that’s the fun in all this, is experimenting to see what works. Day 20, #1 and #2 are responding well after being FIMmed couple days ago. I decided to FIM #3 as well. I also decided to leave the 4th one out of this diary from here on out since she’s behind. We will stick with the original three that survived from the start. So far I’m really loving their bushy appearance and thick leaves. Their roots are coming out super nice as well! Pretty soon these babies are going to just take off!

Dia 134 y semana 6 de floración,ultimo dia de vida de las plantas. Este año ha sido un poco raro las plantas han crecido como monstruos tuvieron un crecimiento espectacular un tallo muy grande y junto con sus ramas flexibles y muy resistentes. Pero al llegar el engorde de floración no se porque les falto el empujon final para hinchar el cogollo, tiene muy buena pinta , mucha resina y muy fuerte buen olor pero me esperaba mas en la fase final. Cortamos ya que tambien habian orugas y no terminaba de eliminarlas por completo, la semana que viene era entera de lluvias así que decidi cortar un poco mas temprano para poder prevenir cualquier mal mayor, hay mucha gente que le gusta cortar antes de tiempo ya que el efecto es muy diferente, este año probaremos que tal.

this strain is very easy to grow.. i do recommend using a carbon filter because she smells really strong when she's flowering

9cm vertical growth this week but she's got a lot bushier!!!!!!!!!!!! Loads of new growth! I'm thinking this week she will enter flowering.

Hola Chicos Humos !! Black Jack Regular con tan solo 2 días de germinada en la tierra , tambien tenemos 3 Afghan de Sensi Seed Regulares con 2 días de germinada en tierra. Por ahora vamos a ir regando con agua de lluvia con un PH de 5.9 Se viene ese seguimiento Humitos

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.