Likes
Comments
Share
Начало 4й недели. Минигров продолжается 😎 Малышка пьёт компот хорошо. Активно набирает лиственную массу. Растение выглядит здоровым и крепким, мне нравится! Пару дней перебои с электричеством, небольшие пауза днем, надеюсь обойдётся без стресса. Мир всем.
Likes
43
Share
Week 8 flower and the OG Kush looks like fire 🔥 so frosty and covering everything. I thought this seed was a dud but it is definitely not! Flowers are not huge but that’s ok. Tight, frosty, and the smell very nice and getting stronger. The development is slow and has been since the beginning, might be something I’m doing or did, not to sure? Lights are at 12” and she is responding well. Looks like about two weeks to go. TS 600’s have done well again! Blimburn OG Kush seems to be producing some potent looking flowers. Need to do a better job taking care of the fungus gnats moving forward. Thanks for the view!
Likes
47
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Processing
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 01/11/2019 - Started using BioBizz Alg-a-Mic on spray, using it once per day at lights off, 1 or 2 puffs to create a light mist, only on non feed days, I mixed 0.1ml on 100ml water 6.4 PH. 03/11/2019 - Gave her 250ml plain water with 6.4PH 05/11/2019 - Gave her 0,15ml of each BioBizz Grow, Max and Bloom on 300ml water 6 PH didn't manage to get it higher to 6.3 at least. 06/11/2019 - She started to show some pistols, probably entering pre-flower. 07/11/2019 - Soil was to dry due to 2930c temps gave her 0,500ml of 6.5PH water with 0,25ml Grow, 0,25ml Max, and 0,45ml Bloom BioBizz.
Likes
32
Share
Likes
128
Share
@PapaNugs
Follow
After topping last week we've just been watching them grow. Bending down the branches to help them spread out. Over this next week I'll start my lst ties to help pull them down and out.
Likes
4
Share
Week 2 of flower for the Candy Kush, she is FAST ! Flowers are developing great, she grows every day without any problems and she is happy praying to the lights !
Likes
14
Share
Hi friends, So I guess I was being really impatient because the bigger girls have begun springing out trichomes!! I can see them deep within the bud sites and are slowly stretching out on sugar leaves. I've noticed that this plant doesn't produce too many trichomes on the bigger leaves so don't let that fool you if you come across that. My girls look frosty on the actual bud sites. Tried to get good pics, will try post more tonight. Other than that, the fast yellowing from previous issues have halted and yellowing seems to be taking a natural course from here. Leaves are dying off but seems that's just the plant doing its thing and getting rid of what it doesnt need. So excited the trichomes came through. Hopefully a few more weeks from here or so. Stay safe!
Likes
6
Share
Sorry for the lack of update smartphone fell into the water a new one is coming on monday , you'll all see the amazing view i have in the garden today :)
Processing
Likes
10
Share
After surviving a wicked thunderstorm last weekend the Devil's still stand tall. I was able to get some branches tied down and everything secured. Tallest girl measures just over 9ft, up above the app will only allow me to enter 118 inches as the most for height when the tallest plant is 126 inches tall. The peak of the greenhouse frame is 8ft. Been having a hard time keeping Monster Bloom in stock so been using slightly less and compensating with Alaska Morobloom 0-10-10. Stepped up the Purpinator a little bit to 1 1/2 tsp, and plan to > as flowering continues. Hopefully in this next week they blow up with calyxes. Was also considering reintroducing my waterproof lights in places to be used during the daytime where light is scarce. On the other hand it's kind of nice having a lower electric bill, haha. HAPPY GROWING TO ALL!
Likes
23
Share
Day 60 flower on the two most developed. Should be right about done by now, but as you can see nute burn has been a pain lately. Anxious to find out how much longer they'll need to mature. Buds on the smallest one with the fattest flowers look thick, but they are waay too fluffy compared to the other equally developed plant. I have only fed twice the last 10 days, to try to combat the nute problem. Thinking I should go down from half dose to 1/3 the rest of flowering, with a bit more normal feeding frequency, to avoid starving them in these last couple/few weeks. Second video is of a small bud I cut off low on the smallest plant. Not mature at all, but it still blew me away. The high was wonderfully balanced. Most of all the taste, was incredible. Even after I dried it for 6 hours on my heating radiator on top of cardboard. Makes me think of how insane it will be when matured, dried and cured like it is supposed to. Just hoping it will fatten up a bit, at least the pistils are starting to come along.
Likes
Comments
Share
Harvested on week 12 exactly. Was a little worried about bud rot during the early drying phase but it seems it just came out a little less bright green than I am accustomed to as there is no sign of rot after drying has completed and curing started. Don’t have a working scale anymore but my eye scale is legendary and I’d say probably got between a half oz and 3/4 of an oz, but would be shocked if it were over 1 oz. My best guess would be around 18g. Tried a small bit tonight right after I transferred to a jar for curing, nice hashy flavor with some pepper undertones. Smells very fruity in the jar, but definitely can smell the flavor without consuming too. The buzz is pretty nice. Balanced and relaxing but not too sleepy, definitely still functional. Seems it’d be best for lazy afternoons, winding down after a long day, or even laid back social events. Overall very happy with my first grow experience and excited to use what I learned next season. Thanks everyone who answered questions along the way, happy growing!
Likes
293
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 No more burning this week, using nutes again. Buds start to bump and are more and more frosty ❄️❄️ 💪 Will do a big defoliation next week ✂️✂️ 💧 Give water each 2/3 day 2 l Water Only 2 l Water + Bloom + Green Sensation + Sugar Royal (3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 13 cm Mars Hydro Fan kit Setting 8 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Gorilla Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/gorilla-cookies-fast-flowering
Likes
35
Share
- I didn't weight wet buds. - The trichomes photos have been taken just before the harvest on buds all over the plants. - The hash balls were : a little less than 1cm diameter for the Mandarin Punch#1 and around 3mm diameter for the Mandarin Punch#2 - Drying was made at 20°C and around 50% of humidity. - Humidity in jar around 50% on the first day, temperature around 20°C. MANDARIN PUNCH #1 Veg time : 44 days. Flowering time : 70 days. Total time from seed to harvest : 114 days. Height : 142cm Pot size : 26l Harvest : 61g MANDARIN PUNCH #2 Veg time : 45 days. Flowering time : 67 days. Total time from seed to harvest : 112 days. Height : 123cm Pot size : 10l Harvest : 41g
Likes
15
Share
She is 4 weeks into flower and doing awesome!!! I started seeing some discoloration on her tips so I cut the nutes by 25%. She is smelling great 👍!!! Buds are stacking and fattening up nicely!! So far this has been a great grow!
Likes
28
Share
Woch 3 ist rum und die Ladys sind alle echt extrem in die Höhe geschossen. Ich denke das der eine wenig sonnige Tag unter den sonst recht sonnigen Tagen, die Ladys etwas nach Licht gesucht haben. Alle Ladys wurden soweit erstmal gestützt, das falls der Wind etwas stärker weht, die Ladys etwas Unterstützung haben. An Tag 21 ging es für die Ladys aus dem kleinen Anzuchthäuschen in die direkte Sonne, die sie soweit alle gut vertragen. Die Pre-Flowers waren bereits an Tag 18/19 zu sehen. Tag 21 ist deutlich zu sehen das sich an der Spitze Knospen entwickeln und sie auch schon minimal einen leichten Geruch verströmen :) An Tag 21 wurde der letzte Liter Substrat aufgefüllt. Für die Blütezeit wurden 10g BioBloom von GreenHouseFeeding, 4 Teelöffel MegaWorm und 1 Teelöffel BatGuano von Plagron beigemischt. Dadurch das Automatiks etwas weniger Nährstoffe brauchen, gab es daher von allem etwas weniger. Das ganze wurde mit ca 700ml angegossen. In der Gießlösung war 1g/L BioEnhancer von GreenHouseFeeding, 1ml/L PowerRoots, 1ml/L PureZym von Plagron. Das ganze wurde mit etwas ph- auf einen ph-Wert von 6.5 gebracht. Zwischendurch habe ich immer nach Gefühl gegossen, je nach dem wie leicht oder schwer der Topf beim anheben war. Anfangs ist es schwer zu sagen wie viel man wann gießt. Wenn der Topf gut durchwurzelt ist, gehe ich gerne nach der 10% Regel. Was bei einem 8L Topf eine Gießmenge von 800ml bedeuten würde. Das ganze dann alle 2-3 Tage. Deswegen aber anfangs eher nach Gefühl und etwas weniger gießen. Wasser nachgeben wenn es zu wenig war ist einfacher als das Wasser wieder raus zu kriegen ;) Möge die Blütezeit beginnen💚🍀 Vielen Dank fürs reinschauen💚🤙🏻
Likes
5
Share
Day 84. She’s been in the dark flashing and getting the ice treatment for a while. Her for leaves are starting to fade to a nice yellow. She smells to high heaven’s. I’m really excited to see how she will finish. She will be getting cut down in the next couple days. The next journal entry will be her harvest summary. I’m really happy with the way she has turned out her body structures are starting to lean down and she would be needing some help to be picked up. Mephisto never lets us down.
Likes
Comments
Share
@Bncgrower
Follow
Week 9...💪