Deep fried Runts remix is growing a little slow but nothing to complain about I did three Plants of the strain doing a little hunting try to find that good stuffI’m sure the will be great but so far so good with the growing a deep fried runts remix number three is not doing well But has stopped growing altogether not sure what the Hells going on with that but number one and number two are doing well Growth has picked up I’m very excited about this strain this year number 3 pheno did not make the cut so I pulled it pheno 1 and 2 are growing well

Smell deep sweet and something so aroma

Everything going good. Growth is starting to speed up 😀. Will start to get a little more aggressive with feeding soon. Excitied for the fall.

Plants are currently drying 2+ months later. And next project au79

Our Green Cure F1 Hybrid Autoflowering by Zamnesia are currently the best in the growbox, they both started really well and I decided to top the biggest one to give the plant a bigger body result. Come on girl, you have a great life journey ahead of you and it won't be bad after that either. Applied Techniques - Given the numerous requests from growers, we decided to show you what happens when you apply topping + Lst to autoflowering plants. It is very important to anticipate it as much as possible, autoflowering plants start flowering at about the 5th intenod, you need to anticipate that moment to give the plant the chance to vegetate as much as possible. In general, when you see that there are two good side branches, you can do topping, they will go into veg as much as possible and you will have a split plant, I have seen very nice results, especially in warm periods when the plant tends to vegetate a lot, in winter we could have a bit of dwarfism but with a lot of resin for sure. So I cleaned everything and cut at the top leaving only the main growth line, called Main Lining, the florets will be lowered during growth and the plant will eventually be like "split" in the main line with the various branches. On photoperiodic plants, however, we will do topping repeatedly, which is not recommended with autoflowering plants so as not to lengthen the times of plants born to finish in 10 weeks. The second week (including a few days of germination) we gave Power Roots 1 ml/l, Pure Zym 1 ml/l, Sugar Royal 1 ml/l, Alga Grow 3 ml/l - Plagron nutrients are available at Zamnesia in convenient pack formats for all growing styles. I used this one with a simple search you can find the other products. ---- https://www.zamnesia.io/it/12119-plagron-top-grow-box-100-naturale.html Try a seed of this strain that drives us crazy... ---- https://www.zamnesia.io/en/10672-zamnesia-seeds-green-cure-cbd-f1-automatic.html Zamnesia Description // Zamnesia's breeding team has harnessed F1 genetics to bring you Green Cure CBD F1 Automatic. This autoflowering cultivar is easy to grow, accessible and reliable for all levels of experience. Ready in just 11 weeks, growers can expect impressive yields of tasty buds with a clear-headed effect that's ideal for meditative moments. Growbox and Air System - Secret Jardin DS120w + fans + exhaust fans and filters DF16 kit ---- https://www.secretjardin.com All the best that mother nature has to offer is at ----www.zamnesia.com

This week was fully focused on correcting salt buildup and preparing a clean, controlled finish, with quality and terpene preservation as the main priorities. 🔹 Key irrigations – Final Flush was applied with real 30–40% runoff, successfully reducing EC levels in the root zone. – Follow-up irrigation with plain water only (pH 6.2) confirmed a consistent EC drop across all pots. – Plants are now in controlled senescence, with no signs of active nutrient lockout. 🔹 Runoff data Runoff EC is now within safe ranges (≈1.5–3.0 mS depending on plant), confirming the flush worked and roots are in end-of-cycle mode rather than aggressive uptake. 🔹 Environment & light – PPFD adjusted (~700–780 µmol/m²/s) – Stable temperatures – Humidity tightly controlled to protect dense colas Everything dialed in to preserve resin and avoid unnecessary stress. 🔹 Plant status Flowers are fully formed, trichomes mostly cloudy with early amber showing, final structure locked in. At this stage we’re no longer chasing bulk, but ripeness and internal clean-up. 📌 Plan Final days with minimal intervention, observing real pot weight and plant response. Harvest window is very close and right on target. ➡️ Next post will be harvest day and the start of drying. Thanks to everyone following the project and sharing feedback — every cycle is a step forward. 🌱💪

Still battling the heat and humidity

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

Hey everyone 😋. We arrived the week before last . The last update comes on Saturday before they are harvested next Tuesday :-). It just smells incredibly delicious, just like the last time it grew with this phenotype 😍. This mother will stay defensive for a very long time 👍. She is really something special 😃. Otherwise everything is still going great. Starting tomorrow, she will only get 0.4 water for the last 5-6 days, which she can use up her last nutrients. Until the next update I wish you a nice week, stay healthy 🙏🏻 and let it grow 🍀👏🏼 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.5 - 5.8 💦 💧

Week 7 Flowering / Everything is looking great! The plants are well developed and covered in trichomes. Last week or close to it: about 50% milky trichomes on the Critical Widow and Amnesia Lemon, with some still clear and a few amber. I’m thinking about harvesting either in the next few days or in about a week while continuing feeding. Aroma-wise: Critical Widow of the lower buds has a really unique profile — like a sweet candy Amnesia Lemon slightly salty, with a subtle background of peanut and a hint of lemon. Flush plan FINAL FLUSH + HARVEST (2x16L SCROG) Apr 21: Drain 20L → 10L FlashClean Apr 22-27 DRY-BACK (do nothing) Apr 28: CUT whole plant dry trim → hang dry 7 days

Mar 31st Week 16 Mar 30 Changed nutrients to straight Dense Bud Compactor 1 gram / litre @ 900-1000 ppm April 1st I will add the rest of the nutrients to the exiting solution and check on ppm level April 1st changed nutrients from straight Dense Bud Compactor to full range all listed nutrients Added 8 litres of fresh water + 6 litres of the existing Dense Bud solution to come up with a mix concentration of 1100 ppm Hopefully this will be the shit!

I'm expecting at least another week on the hubba bubba as it's getting nice and thick, and I haven't noticed any new pistols form in a few days. The ABxRKO is still trucking, and it makes me excited for the next drop that tree1four did. It smells heavy on the burger side, but not super meaty. It has a slightly sweet gassy meaty smell to it.

Week 3 starting, plant is growing at its pace. I have installed the materials for starting LST. Humidity is hard to keep, so I water Emily every 2~3 days and check substrate very often

Starting to ripen a lot this week and put on more size on the buds, she is getting near the end very happy with how she is going, swapped my light schedule back to 20/4 for last few weeks, Started giving her some PK also.

Week 15 going good…not bad …switching to bloom nutrient… and did a ton of defoliating to loosen up the canopy hopefully they won’t grow too much when I flip them to 1212 in a week I’ve seen these plants three times the size. Hopefully I can stunt that growth during the initial stretch by switching to Bloom nutrients early. Defoliating a week before flipping. I may decide to top them more but I probably won Do I have to type here for it to be green this is crazy. I’ve done more than a paragraph now at this point it’s kind of weird that it’s not green be green what the hell can it still not be green

+ data+charts online rakongrow.lima.zone/growme-mango-kush-auto-015.html Tag 81 : der rest dünger ist defenitiv jetzt umgekippt. egal , sie holt sich was sie nutzen kann und blüht fröhlich vor sich hin . sieht allerdings etwas gerupft aus .

I definitely enjoyed and having cool cure definitely a game changer . Bout to test it out some more by leaving the buds or recent harvest inside the system. Thinking cutting down the time 4 weeks in veg and 8 to 9 weeks in flower to keep it coming and posted..

creciendo de poco a poco , eh tenido unos problemas por la altura de una de las plantitas. @flp_igm92