Likes
Comments
Share
@Ninjabuds
Follow
Pretty buds and leaves nice plant lets see how it turns out
Likes
56
Share
@Aedaone
Follow
The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil to be spread evenly on top of the soil. Day 1 we had high temperature of 87°F with partly cloudy to cloudy skies. I watered 3-4 gallons from the hose. I added 100 ml of blood meal spread evenly across the top of the soil. Day 2 We had a high temperature of 85°F. It rained the previous night and intermittently raining and thunderstorms today. I did get these trained a little this morning. It's not finished, but I took some foliage off and opened them up by tying the branches to stakes arranged on the outside of the pots. I finished topping off these pots with soil that is premixed with nutrients. The rain is watering today. Day 3 we had a high temperature of 73°F and all day rain. The rain was what remained of hurricane Beryl. There was a lot of wind up to 20 miles per hour. These girls handled it and loved the rain. Day 4 we had clear sunny skies and a high temperature of 85°F. I fed 150 ml feather meal , 30 ml Plant Tone, and 50 ml Coop Poop. I watered 3-5 gallons from the water hose. Day 5 we had a high temperature of 86°F and partly cloudy skies. Plants #2and #3 developed powdery mildew on their lower leaves. I'm going to treat for the next 5 days with Arber organic biofungicide. I ran the fertilizer a little hot the girls are clawing and super dark green this evening Day 6 we had a high temperature of 85 with partly cloudy skies. Day 7 we had a high temperature of 86°F. This morning we had plenty of rain and wind. No need for watering. The skies were mostly cloudy to partly cloudy in the evening. This week was a success. We had lots of rain, cool nights and humidity. This caused the #2 and #3 plant to develop powdery mildew. This is the challenge here on the Ozark Plateau. We are strictly organic. We use no systemic fungicides and the only pesticide we use is occasionally is organic pyrethrin spray. That said, now that we've identified the plants that don't have immunity, we'll treat with Arber bio fungicide. This treatment will last 5 days then they have to make it with what they were born with. Also the nutrients ran a little hot on them. That and the several hours of rain depriving them of iron has their centers looking rough. They'll be better next week.
Likes
281
Share
Germination date 🌰 26/01/2021 Day 49 🌱 20/03/2021 Strain 🍁 🍉Watermelon zkittlez auto Barneys farm 🍉 Nutrients 💉 All mix slow release fertilizer 3lts/90lts of soil (guanokalong) Organic Wormcastings 25% of bag and added small amount slow release organic bloom to soil. Will top, top soil up in 3weeks 5weeks 7weeks as they say they're 70day auto. Will be adding in bat guano and bloom to water 5weeks on Set Up ⛺ amazon special not super cheap 💡 spiderfarmer sf4000 📤📥 AC infinity 6inch Notes ✏️🗒️ Will take some more pictures later and update.. Coco plants are taking up all my time at the minute so lucky these autos are packed with dry amendments and keeping themselves going. Considering there not getting much attention this strain is so frosty and it stinks. I know if I put my full attention into these they would be mega frosty. Other 2 are behind and will most probably end up outside as I dont want to super veg the photo periods 1st time round. Purple matcha is growing like a beast and looks like it's going to hog a lot of room come flower. Definitely making things harder with doing photos and autos together, wont be doing that again unless I extend my grow space in the future. Pk week for the bigger one. Happy growing everyone 🌱🍁 Updated some pics, let me know what you all think. Spider farmer 4000 is proving to be a very good purchase and no I didnt pay the stupid amazon price 😂 Managed to get for under £400 on black friday last year direct so if your thinking of getting one go direct to spiderfarmer 👍🏻 Vitalink buddy and pk doings its job nicely. Girls are packing on some weight 🍁👍🏻
Likes
2
Share
@Ninjabuds
Follow
Everything is looking great for now. Busy week. Check back next week for individual photos of he plants will be starting to be pretty fat by then
Likes
32
Share
Hey everyone 😃. This week this beautiful lady has developed so beautifully that I haven't even dared to train 😂. I'll start doing it next week 👍. It was poured twice with 1 liter this week. The tent was cleaned and the humidifier was refilled every day. The ambient values ​​are in the optimal range and the setup has been checked 👍. I wish you a lot of fun with the update. Stay healthy and let it grow 👍🍀🙏🏻 You can buy this Strain at : www.Zamnesia.com Type: Banana ☝️🏼 Genetics: OG Kush x unkown 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
12
Share
@Webacca
Follow
Auch hier ist die linke der Reihe die, die Gas gibt. Black Ice satte 15cm. Die beiden anderen auch nur etwa 10. Trotzdem alles im Lot. Sattes grün (vllt einen Hauch hell aber sehr gesund), guter Wuchs, alles so wie man das möchte. Wochenzeitraffer der letzten Woche ist dabei Update unter der Woche: Sie wachsen und saufen gut. Hab nochmal ordentlich Laub entfernt. Korioserweise hab ich dabei entdeckt, dass die Lemon Cherry Cookies noch nicht blüht sondern stretcht. Verrückt.
Likes
15
Share
@Uwish
Follow
Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++
Likes
Comments
Share
@Robom069
Follow
Day 75/76 everything is going to grow together so the compounds the way they should and i dont get bugs or overstimulated effects so it should be a pretty good harvest in 2 months
Likes
567
Share
It's been 38 days of flower now and The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. They are starting to get some frost now. Quite a bit of frost too. A bud fell off because I bent it accidentally, so I just chopped it off because it was hanging and snapped. There's a picture of it below. Should be good weed with how much crystals it has and it's only 5 weeks of flower👍I Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. It really got my last grow extremely frosty and is doing the same so far for this grow. I'm very happy with every product I have gotten from mars hydro 👍👍There's not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍   Track: Ethan Meixsell - Thor's Hammer [Rock] Music promoted by BreakingCopyright Watch: https://youtu.be/o6Gr0xn6U88 Download: https://www.youtube.com/audiolibrary_...
Likes
45
Share
Hello my friends, ...May 17 2022.. Day N°65.. ...Flowering day N°10... My three Feminized Bubblegum are fine, développé very good, they are beautiful, they stretching normally, I made a little defolliation. I feed them with the Hybrid Powder from Green House Feeding Nutrients, I gave them some CalGreen from Metrop, the best Cal-Mag of the market. They are under a MarsHydro TS 3000 at 50% of power and at 50cm of the canopy. www.00seeds.com www.mars-hydro.com Thank a lot for passing through here. Wish you the best with your green projects, peace. See you soon 💨💨💨
Likes
11
Share
@DE_BW
Follow
Flowering week 5 and the plant is transitioning into the Overdrive phase, with an estimated 8–9 days remaining until harvest. Buds are stacking quickly and showing a surprisingly strong sweet strawberry-like aroma that fills the room. From above, subtle purple hues are starting to appear, adding a nice visual touch to an already very healthy-looking plant.
Likes
6
Share
@CheeRz
Follow
It's week 12 of flowering, and the end is slowly but surely coming. The leaves are gradually turning a deeper shade of purple. The scent is truly impressive. I can't wait to try the buds! 🍋🍒🍦
Likes
10
Share
@L_Choppa
Follow
I’m very impressed with my first clone attempt doing good so far I will have to start some type of training not sure which way to go I will appreciate any Suggestions thanks
Likes
24
Share
Ya tenemos está segunda semana de esta maravilosa feminizada Purole Kush de @Kannabiaseeds. En esta segunda semana ya le empezamos a echar los fertilizantes de floración caseros echo por nosotros mismos 😍
Likes
17
Share
Moby Dick XXL Overview- Growth ~ *Grown under a spider farmer sf2000 only in a 4x4 tent* Initial Veg period was 5 weeks. I did not top her and I performed very minimal LST/ defoliation. I started her right of the bat with the microbials (Mammoth P/ Recharge) and then later added my NFTG feed int week 4. She really started to explode in growth in week 4/5. I honestly did not notice one yellow leaf up until the very end when I started to flush her. This strain is very very tolerant I would say and grows HUGE. I started seeing signs of flowering in week 6 and it was history from there! She exploded with even more growth nearly doubling its size in flower (3.5 ft to be exact) and she grew many massive colas slammed with milky trichomes and dank smells! Buds grow long and slender as opposed to small/dense like golf balls. Nutrients ~ She was potted into a 6-gal fabric airpot w/ M3 soil. Like I do with most my plants I started her slowly with just microbial feeds (w/Mammoth P and Recharge) and I did not start using my main nutrient line (Nectar for The Gods) until week 4. I really like using a foliar spray to feed also. I kept a simple feed schedule with this one and it worked out really well. I try to follow this schedule (Shown below) as close to possible with some obvious interruptions to it here and there. Microbe tea /VEG ONLY*foliar spray No Water Feed /VEG ONLY*foliar spray Microbe tea No Water /VEG ONLY*foliar spray No Water or Flush (every two weeks) Aroma/Taste ~ One of my favorite parts about this plant was its aroma. Very pine like but sharp and unique . Its described an exotic wood smell and I definitely get that. Its so refreshing and earthy it’s a VERY nice change of pace from the fruitier strains. You do get a slight citrusy smell but the pine/ wood smell is really the overpowering smell. It is by far the smelliest auto I have ever grown so I really really respect how well of a job Dinafem did on these genetics. They obviously didn’t just focus on the size of the plant! She has a nice smooth flavor that is earthy and sharp . The wood flavors linger a bit which is very nice! Effects~ Almost instantly felt it in my head. Blessed with a euphoric feeling of calmness and almost a numbness to reality. I felt it for sure and it was very potent. 1 joint had me feeling it very hard and th high lasted what felt like an hour or so which is not the case for me usually! Its attributed to the sativa dominance this plant has. Im so used to growing hybrids or indica dom plants I almost forgot what sativa highs felt like! Thanks Moby Dick XXl for slapping me in the face and reminding me!! Overall thoughts~ This plant is really easy to grow, and she stays true to her name and grows massive. This strain should be tried by any auto lover 100% I think Dinafem nailed this strain all across the board. Was pleasantly surprised with how tolerant to nutrients/ light she is. I had the light closer than suggested most her flowering and she didn’t stress at all. I cant really come up with a negative thing to say about this plant, maybe the buds are airy but that’s because she is very sativa dominant it was a bastard to trim her for sure. Drying/ Curing method~ -Dried for 11 days in a low humidity environment/ completely dark area with good airflow. Hung her as an entire plant with all the leaves still on her. -Dry trimmed her (very hard strain to trim) -Put right into mason jars and sealed shut for 3 days then began burping her (I am not using boveda ***) -Burped twice a day for 2 weeks straight and maintained 60-62 humidity. -Slowed down burping to once a night the third week .
Processing
Likes
7
Share
@Dunk_Junk
Follow
Not quite ready. I will give her another week.
Likes
6
Share
@Excalibur
Follow
05/10/2018 New Tent setup. 4 plants - Veg room. 06/10/2018 Re-arranged the room to make it more practical. 07/10/2018 2x Seeds Pineapple Haze dropped into Root Riot. 08/10/2019 Propagation kit added 11/10/2018 Day 5 Sprouted 12/10/2018 Day 6 - Stretching 13/10/2018 Day 7 - Added to the tent setup.
Likes
2
Share
@nickeri
Follow
18.6.2k24 ✅💚 23.6. - Low stress for a stronger peak