Inicio de floración , fotoperiodo 12/12h. bajo 300W, ATS Pro 2,7 µmol/J. Por lo que hace al cultivo. Una segunda aplicación foliar con Spider boom 3ml/l para prevenir posibles plagas de araña roja. Todo y habiendo unas temperaturas en el exterior de 0ºC en el interior se está bastante bién. 😋 Así de primeras diria que esta luminaria me parece de lo mejorcito que he tenido nunca, reparte la luz como ninguna otra penetrando mucho mejor. Otra es la comodidad para bajar o subir la potencia y la posibilidad de añadirle un controlador que monitorea la temperatura de la sala de cultivo, el fotoperiodo y la intensidad, así como la atenuación de potencia. Esta semana cansado de ir bajando o subiendo la potencia del extractor durante todo el año he decidido probar un SMSCom Smart Controller. De esta manera espero no sufrir tanto por las subidas ni por las bajadas de temperatura. Muchas veces son las que por A o por B descuido el interior y casulamente son los dias que el tiempo cambia repentinamente. Un primer foliar con Delta9 para que se pongan fuertes para lo que les viene.

Looking really good. great size plants, flowering is starting to look dank!

Hopefully only two more weeks to let her flower. Keeping an eye out for the color change. Everything seems to be bulking up as we speak.

one of my FullGas is late from the beginning and even for flowering. I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone

Safe to say we're heading into flower. I'm pretty close to full strength on the nutrients at this point. Still defoliating and filling in the screen. Plant on the right is slightly behind as far as kicking into flower. Some yellowing browning just starting a tips. I'll change out the water tomorrow (on day 49). Averaging water changes every 12 days. Day 49: Did not change water today, will on day 52 or 53 instead. Decided it could just be the light being too close. Moved it up and did a little lst above the screen. All done removing branches and leaves. Great end to the first week of flower.

Autoflower Update – Week 6: Ztrawberries Welcome to week 6 of the Ztrawberries! They are looking absolutely amazing and have gone through the pre-flower phase without any issues. They've grown so tall that I was genuinely worried they might never stop stretching! Around mid-week 5-6, I decided to turn up the light to its full power of 600 watts. This ensures that as they enter the flowering stage, the buds will develop with maximum intensity right from the start. For the past four days, they've been getting 2 liters of water each, as anything less leaves them too dry within 24 hours. They’re also loving my Advanced Nutrients fertilizer, which is keeping them perfectly healthy and vibrant. I’m really excited for the flowering phase now! Based on my current experience, I’d estimate at least 100g per plant, which would make me more than happy. Let’s hope everything continues smoothly without any major issues! 🤞🏻 Autoflower Grow - Week 6 Update Everything is progressing positively with the plants. They've now fully entered the flowering stage, and it's exciting to see their development. Each day, the white pistils are becoming more prominent and continuing to grow, showing clear signs of healthy blooming. I'm hopeful that the entire flowering phase will go smoothly and result in a fantastic outcome. Fingers crossed for the best!🌱

Willkommen Growmies in der Woche 8, Sie ist jetzt in der Endphase angekommen und bildet weiter fleißig Blüten Spitzen aus samt Harz Produktion bis auf die Zuckerblätter!Auch fängt sie mittlerweile an den typischen GMO Terpenen Profil zu verströmen;)

Todays the day! I actually probably waited to long. I shoulda done it earlier, but we will see how a little LST goes on these units! Lemme work my courage up to it with a few beers. Will post pics! _____________________________________________________________________________________________ I think LST went well. I grasp better the point to LST and how its pulling everything to an even canopy level. I think I did it pretty well, but now I see why you might start it earlier to get those main stems down more. I still don't understand which branches would be better to cut now, I will try to follow how they grow so I can "control" better what is growing. ______________________________________________________________________________________________ Another small victory was that the runoff PH was 6.1! Exactly where I want it to be! And I noticed roots growing down at the base of the air-pots so the root-ball has encompassed the whole area! I wasn't sure where the roots where in development. I'm very happy to get LST going, and I'm excited to see these bad-boys pop back!!! __________________________________________________________________________________________ Things look great by the middle of Week 3! the LST went pretty well and they rebounded nicely. I decided to push my luck tonight and after tucking a bunch of leaves decided to adjust the main stalk on a plant and snapped the main stem halfway. I've been assured thinks will be ok, but i'm still mad at myself for forcing it. Gotta be gentle! Will have to watch and see what happens there 😭. I also decided tonight to give the girls some nutrients along with their supplements. easing in to things with 1ml of the GH trio to kick things off a bit earlier than I planned.... Gonna be interesting to see how they take it! So much suspense for the coming days!!!!! ____________________________________________________________________________________________ Thur I went in and removed a couple fan leaves that were blocking nodes. I notice that there is a bit of nitrogen in the leaves so I think Floragrow might have been too much, It might just be best to wait and just add bloom instead. I will monitor... The split stem also seemed to not slow the plant down at all and things have bouced back nicely and everything seems to be on track!

Our lady eats a lot of food🤭 It absorbs food well🍭

10/17/24 Short facts: - Continued with LST - Watered: 1 x 1.2L, 1 x 0.3L, 1 x 2L - VPD @ 0.9 — raised by 0.1 - Light @ 50% ~500 to 560 PPFD - Removed 2-3 leaves --------------------------------------------------------------------------------- As promised last week, i made a video and explained the progress so far, and did show you the plant. Not much to report. I continued LST, though I’ve stopped for a few days now since the branches are well spread out, and that should be enough for the time being. The Grease Monkey is getting much thirstier, so I had to water her more than the other two plants. This correlates with her growth, which is exploding right now. She was already in preflower, but officially switched to flower on this day, so next week will be her first real week of flowering. I’m curious to see how much she’s going to stretch. Great plant! She’s currently my favorite in the grow tent.

So clenad up everything. Doesn't look pretty but theu will bounce back. Once they sre reach the edges will let them grow agoit 1foot up then flip them.

Dear Friends ❤️ in this week we topped again and bended these two Mob Boss by Anesia Seeds. They recovered really fast from this stress, from now they will develope a lot of bud sites! the week of difference is allways less noticeable. I missed to give top crop Big one at 14 october, it is important to give 10 days before flowering The last day of this week we switched the light to 12/12 week #5 of vegetation The 240w light is working at 50% power and now it is combined with the 480w quantum board. I consider week 4 the week from 18/10 to 24/10. day to day fert schedule: 📅 18/10 📅 19/10 NEEM OIL 📅 20/10 📅 21/10 Top Veg 3ml/L-Deeper Underground 2ml/L - Green Explosion 2ml/L - big one 2ml/L - PURPINATOR 1,2ml/L 📅 22/10 📅 23/10 📅 24/10 I really want to thank Martin of Anesia Seeds, he helped us with the strain's choiches, so THANK YOU Martin, thank you Anesia seeds. Seeds and merchandising ( my god we love these things ❤️❤️❤️) were sent in a dark discret package, shippin was incredibly fast, now is our mission to achieve the best from these lovely seeds. Germination was incredibly fast, less than 36Hours to make the root sprout on. ABOUT MOB BOSS🤓 Mob Boss, feminized Seeds The rare Mob Boss genetics of Anesia is an extremely resinous, potent and high-yielding cannabis strain that sets new standards. To develop the Mob Boss strain ANESIA Seeds crossed a Chemdawg D with a Tang Tang and selected the resulting plants for potency and big yields over several generations. We stabilized the genes over many generations and have brought with it a true miracle of resin on the market. Mob Boss has 2 phenotypes, which differ slightly in growing and blooming period. The flowering time of the stocky growing variation is 60-65 days, while the higher growing pheno requires 5-10 days more to mature fully. During her flowering phase she produces yields of 700g per square meter. Outdoor she can be harvested in early October and you can look forward to about 800g per plant. Because of her huge resin production this strain is well suited for the production of BHO and other extractions. The aroma of the Mob Boss is very fruity with berry notes. The first Pheno offers strong psychedelic effects and triggers daydreams while the second pheno delievers a more clear and energetic head-high. Mob Boss relaxes the body and is an ideal strain for the weekend with its unique intensive and versatile effects. It helps to relax your mind and body while recharging you. The Mob Boss strain is rare and special cannabis genetics which could be safed and stabilized by Anesia. With their extremely frosty and resinous flowers and their high production she has made herself a name and inspires every grower who once cultivated her. The buds look impressiv crystalline and often red or pruple coloured. The effects of Mob Boss are long-lasting, extremely strong and fast hitting. She has an THC content up to 28,7% and is specially recommended for experienced users. Growing Mob Boss Mob Boss is a perfect plant for SCROG methods, as it will produce large colas on well-trained side branches and continues growing more dense into the next time. This plant seems give the best combination of yield and quality when grown hydroponically. Medical Use This strain is used for mood elevation, appetite stimulation and for pain relief. It is a strain for daytime use. • Yield: 700g/m² • 800 g/plant • Genetics: 40% Indica, 60% Sativa • Flowering time: 60-75 Days • Outdoor harvest: Mid of october • suitable for indoors and outdoors • Height: 110-120 cm • 180-230 cm • THC: 28.7% • Aromas/ flavors: forest berries BUY MOB BOSS FEMINIZED: https://anesiaseeds.com/product/mob-boss/ 🔧💡WHAT I AM USING💡🔧 -LIGHTS: 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B temperature: 3000k Heat dissipator board: No Noise: 0dB 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B temperature: 3500k Heat dissipator board: YES 15MM Noise: 0dB -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Power: 42-50W RPM: 1940-2620 minimum -1 Maximum air flow: 430-560 m³ / h Sound pressure level at 3 m: 32-44 dBA -FANS: A)OSCILLATING FAN Maximum consumption: 20 W Minimum consumption: 17 W Fan diameter: 15 cm Housing diameter: 20 cm Height with handle: 35 cm 2100 revolutions per minute Two speeds B) COMPUTER FAN Sunon DP200A - 230V Nominal power: 22/21 Watt Noise level: 44 / 49dB (A) Rated speed: 2700/3100 RPM ± 10% Air delivery: 95/115 CFM C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h, can be used in medium-sized rooms. High silence and reliability make it adaptable and versatile. Technical details: Rotation range of 90 degrees Tilt adjustment Three speeds of rotation Suitable for wall and ceiling suspension Power Consumption: 35 Watts Air Flow: Approx. 740 mc / h Operating noise: approx. 39 db Diameter: 20 cm Voltage: 220-240V Frequency: 50Hz Dimensions: L 28 x D 16 x H 28 cm 💊💉💊FERTILIZERS: MAIN FERTILIZER BRAND: TOP CROP I use these products: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ ❤️ THANK YOU FOR BEING HERE ❤️ Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated. 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

5th week of flower, the plant has stopped growing and focused on the buds. Both plants look nice, I’m hoping the 3 gallon plant gets fatter before the end though.

Was a Pleasant experience growing this plant and I would highly recommend for her ease and fast growth for a Indica, Still have more seeds from expert seeds of Banana Ice cream and I am going to grow her next... Ended up with 63 grams from one plant..

nice week , coming along great. put back the ones that went to rehab. they can flower and see what happens among the elite tent. nutrients this week i have added bio boost for flower. getting th winter air in at night as i want to see color as we develop here. hope everyone good

girls are growing well. changed water change out cycle to replacing 1/3 of entire resevoir every 3 days. The theory is that i will be able to transition changes to nutrients slowly to identify any changes to the girls. one girl showing sign of what i believe to be calcium deficiency.(picture attached)

Kind of gave up on the weekly updates lol but here we are closing in on the end of the cycle! 3 bears is looking absolutely amazing, I’m so excited for the harvest. Basically no signs of deficiency whatsoever except for the occasional oddball leaf. Buds are shaping up nicely and getting close to maturity, currently around 80% milky so once I start seeing some amber pop up I’ll switch to flush mode for a week or so.

7.14.25. Harvest was 7.13. Glad this grow is over time to finish up! Wet bud was 22.5 grams Bud looks decent sticky and smells pungent! Will starting next grow in month or 2! Thanks for checking out grow!