4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.

Aside from some light burn on the top colas, I'm happy overall, but I may have harvested a couple days too early. Upon further inspection, I'm seeing about 60% cloudy, 30% clear, and 10% amber. Will strive to be more patient on my next run :) Something worth noting about light distance to canopy - If your colas are within 12" of this light, or any high powered light, you will notice that your spear headed colas will start forming into fists, with perpetual white hairs. Can be confusing when it comes time to harvest, as you're patiently waiting for white hairs to stop producing. In this situation, keep your eyes on the trichs! Will update once I'm done trimming. Big Thanks to those who've been following along, and to the GrowDiaries Community for being so welcoming and helpful. This will be the first of many grows on this platform. I'm here for good! **UPDATE** Total harvest weight is 119 grams :D Very pleased with the outcome. Will need to practice a bit more patience on my next run so I can pinpoint the perfect moment to harvest. I also decided to flush for a full week since I pushed nutes to full strength in the last 3 weeks. Hang dry in the tent, 2/3 internal fans off, intake/exhaust running at half speed, managed to maintain a temp of 65-70 and 50-40%RH :) trim after 8 days (small branches and buds snapped off) curing in a small bucket with 58% Boveda, burping daily. Hoping to be ready for smoke by 420

Very nice this is my 4th run with triple and seems i have now mastered her! With extra supplements and additives i was able to acheive this beauty! She has very nice structure and potencty is up there! I recommend this to anybody!!! She smokes like 30% strain The Teprs are out of this world 😍 The buds looks 10/10

Test

I am dropping a Deep Forest Auto for a coco coir grow in a air pot. First time using a air pot. It should not be any different then using a fabric potter. I scuffed both seed ends lightly. I then dropped it in water. Within 24 to 48 hours of seeing the tap root start I will plant it in the coco. I will then dome it till sprout. Thank you Doctors Choice, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Lemon Mandarin x2 Lemonpaya x2 Papaya Sherbet x2 Gorilla Melon x2 Orange Sherbet x1

Easy going week. nothing much to report. The EC pen I got is acting weird already. sometimes I'll put it in the feeding liquid and it will display 400ppm something. Then if I move it about or drip it in and out it will jump up to 700ppm something. I doing it over and over till I get a base line and go from that. this weeks EC was aorund 680ppm but the video does not show the other dips I did. PH still kicking aorund 5.9. I find it more annoying to adjust just the waters PH for these plants on the balcony where everything else is "as is" Will try this again indoors in a peat and perlite medium void of any other additives when It can have more of my undivided attention. maybe on the other seeds I got from FB via a friend in the mail. Side note uploading videos into the diaries is great and all, but takes to long to resize and process, can't hit save till its all done... no idea what its doing in the backend. stupid rule on contest must have videos every week,

Ich habe meinen Ladies eine neue Wohnung gesponsert. Von 5.6L auf 11,0L. Ich glaube, das wird ihnen gefallen. In den nächsten Tagen schicke ich sie dann in die Blüte. Ansonsten ist alles gut. Einige Klone für einen Freund habe ich noch versucht..... bin gespannt, ob die gewurzelt haben.

She has stretch very nicely and at the end of week I can see that she will start flowering next week .

Well she doubled her height this week. She is the smallest in the batch. If I'm honest I didn't expect her to make it this far. During germination I disturbed & agitated the box by knocking it 😡 this led to the very tip of the taproot being severed off but crucially this was below the 'hairs' that extend out horizontally. I took a gamble and planted her expecting it to be a mortal wound but mother nature again shows her resilience. Above all else I've learned that nature strives very hard to survive. It's kinda humbling really.........

Chopped the purple fruit/diesel smelling plant

Nice sweet smell... could say what strain it is because its from sweetseeds sweet auto mix 10 pk of the best.. Definitely going to enjoy this one ... Grow went well and fast 62 days flat...

Se me ocurrió hacer un scrog desde ceros, aunque es solamente un piloto ya que falta una defoliación y un arreglo en la estructura, pero eso nos da a entender que este ciclo de vegetativo le falta aun varias semana, realmente lo hago para divertirme 💚🤩

Grow Journal Week 3: Bloom Phase Progress 🌼 Hello dear growers and growerettes, I’m thrilled to share the third week of the bloom phase in our grow journal! Here are all the details for Week 3: Weekly Progress We are at the end of Bloom Week 3, and the plants are thriving! Even our previously problematic plant has made a full recovery. My favorite plant, the one on the left, has claimed an entire half of the tent for itself. The stretch phase has now concluded, and I am very pleased with the results. Watering and Control Systems The watering system is operating smoothly, even with the increased water consumption of the ladies. The Blumat and TrolMaster systems are working without any issues. Challenges In Week 2, I performed a heavy defoliation since I had some time that day. Although it was a bit early, the ladies have recovered well. Due to limited time over the past two weeks, and this likely continuing until the end of December, I've been doing my best to keep the journal as current as possible. Goals and Expectations In the next two weeks, I expect my buds to start swelling, and I am very excited about this development. Thank you for following along, and stay tuned for more updates! 🌿✨

12/02/22: The colas are heaving with heavy buds and more orange sites are springing up. On the full dose of nutrients now for the last few weeks. I had to use more cable ties today to keep the colas from falling over like in previous weeks. good strong smell. great environment for flower. defoliated again mostly near the bases.

🎩🌈🍬⛽️💨👅💦