Transplanted to 5 gallon pots half way through the week and heavily watered/fed for the next 2 days, then topped for the first time yesterday. The 3rd clone didn't make the cut and is now on my windowsill. Next couple of weeks will be about keeping the plants trained and the same height. 2 timelapses this week. Enjoy!

ZigkGrow is back in the game😎 Hello to everyone guys. I hope everyone has been growing epic buds since the day I finished my first diary. My first diary went pretty cool. I enjoyed a lot but knowing myself I knew that I had to learn more about growing cannabis to achieve higher levels and be okay with myself. So Zigk after many hours of researching, smoking and having fun came up to this day with this diary. Hope everything goes well and what I've learned will bear fruit in this grow (literally😅) Let's talk a little bit about my setup and the flashy "Automatic-Watering System" to shed some light in the tunnel. I bought a tent 0.40x0.40x1.40cm so we are pretty tight here but I am hoping for a "one and good" plant. I am going to use for lighting the led panel from Spiderfarmer SF-1000, big upgrade compared to the 250w CFL I had back then. I will be using coco coir in a 6lt airpot with high fertigation and a RTW/DTW hydroponic system. I've also got some pretty good meters. HM Digital PH-200 for pH and HM Digital COM-100 for EC. There is also a humidifier and a carbon filter from Airontek with a VKO 105m3/h exhaust fan. So how does the Automatic-Watering System works and how do I achieve high fertigation with that : There is a reservoir (blue box in my case) out of the tent where I keep my nutes mixed with water. Inside the reservoir is an airstone that provides oxygen and a submersible water pump connected to the pipe. The water pump plug is connected to a timer which I set when to run and for how much time. When the pump is on is sending nutes to my plant and I can control the flow of it with a valve. Practically I dont have to water by hand and I can achieve high fertigation which means watering with nutes many times a day. My plan is to water 5 times a day. Now is the time for the big question. Will this work and give me higher and better yields? I am not going to explain the science behind this theory because I want to keep the diary clean and talking about this would need many rows of words. You can search it on internet tho and find many articles. I am not capable of answering with confidence now and we will only be sure by watching the results. So let the time show us and have fun!😄

Still waiting for trichomes to amber up⏳ This is a very enjoyable grow using LST. Much more time consuming but I enjoy gardening so it's great for me. I'm excited to see harvest amounts with LST💚🤗 I've moved both Gelato & Younger Zkittlez into a colder dimly lit room to hopefully enrich their colors. I will be harvesting them in the next day or two. I've moved the two remaining mother plants into the smaller grow tent to finish flowering & I moved the clones to the larger grow space finally!

17.01. F15 The plants have now reached a height of around 80 cm, and the stretch is almost finished, slowly coming to an end. Bud production has clearly started, and overall the plants are looking very healthy, strong, and well structured. Over the past days, intensive defoliation and lollipopping has been carried out, but deliberately not all at once. Instead, a small portion is done each day to keep stress levels as low as possible. Due to the heavy branching, a large number of small side shoots had formed, many of which were removed to improve airflow and create a more open plant structure. Overall, the grow continues to run very smoothly and according to plan, once again strongly supported by the Biotabs nutrient system. One major advantage is that no CalMag, no dolomite and no additional corrections are required. Feeding is done strictly according to the Biotabs schedule, otherwise following an “only water” approach – with outstanding results so far. Powdery mildew is still present, but only at a very minimal level. Occasionally, 2–5 affected leaves appear and are removed immediately. In addition, the entire room and the plants are treated twice a week with a water–Purolyt solution. Compared to the previous run, there is a very noticeable improvement, and the effect is clearly visible. At this point, the grow is running fully on track, and the photos and videos speak for themselves.

Bit disappointed with the phenotype.

🌱 Day 43 - Beginning of the Third Flowering Week 🌱 Hello grow friends! 🌿 Today marks the start of the third week of the flowering phase. This week, I’m trying to adjust my nutrients a bit. I plan to slightly increase BioBizz Grow, as well as BioBizz Bloom, according to the feeding schedule. 🌱💧 I’m continuing to prune and thin out the plants a little each day, aiming to keep them stress-free. ✂️😊 The terpenes and buds are developing wonderfully so far, but I’m still struggling with very high humidity levels. 🌡️💦 Since my grow setup is on the second floor and we’re currently experiencing humid temperatures here in Germany, it’s been a challenge. I’m trying to reduce the humidity from 62% down to 50% during the day, but it’s proving difficult. 🌬️📉 I’ll keep you updated on how things progress! 🌿✨ 🌱 Day 47 - Everything is Going Well 🌱 Watering and Nutrients Today, I watered and fed the plant again. 🌿💧 Each plant received 1 liter, which is about 10% of the pot's volume. The plant is responding well to the nutrients, and growth is steady. Defoliation and Light Exposure I’ve done some light defoliation to ensure that every part of the plant gets proper light exposure. ✂️💡 My goal is to avoid any shadowed areas, allowing the buds to develop fully. Temperature Management The temperature is still quite high, reaching 27-28°C during the day. 🌡️🔥 I’m finding it difficult to bring it down, but the plant seems to be handling it well. To maintain a healthy environment, I keep both the fan and the exhaust system running on the highest setting, ensuring good air circulation. 🌬️🔄 Humidity Control Currently, the humidity is sitting at around 45-50%. 💧 It’s not perfect, but I’m monitoring the plant closely and making adjustments as needed. Careful Defoliation I continue to remove one or two leaves each day to minimize stress on the plant. 🍃🌿 This slow, careful defoliation ensures that the plant stays healthy while making sure all buds have access to light. Guard Dogs on Duty My dogs took a peek into the grow tent today and are now keeping a watchful eye over the plant. 🐕🌱 They’re doing a great job of “guarding” it! 🐾 I hope you enjoyed this update! I’ll continue to keep you all informed, and don’t forget—I post daily update pictures of the plant! 📸🌿 Stay tuned for more!

1/19 1am MONDAY...TOO STONED TO TYPE..WHAT THE HELL IS THIS THEN..HEY SHUT UP....WAIT...IS THAT ME?😂 1/19 5 AM.🚨 I GOT THE HOLY TRIANGLE OF WEED THE WHOLE FUUCK'N TRAILER PARK IS HERE!!!!! Finally got black tea Tangie in the ground so Julian bubbles and Ricky are all growing with Montel and ice t. 1/20 1:20PM VEGING PERFECT AT 30 WATTS!!! 1/21 10:11 AM. The whole fucking park is here. Julian sprouted!!! Bubbles and Ricky are doing great. I’m gonna top them and then I’m gonna start them over from clones so they grow roughly the same time as Julian and I’ll keep the Ricky and the bubbles others as mother plants and I’ll just keep them going. 1/21 10:15 AM vegging 12 inches 30 W Samsung LED Mars Hydro light perfect 121 1:10 PM I moved black tea Tangie into the germination station. The 2 gallon fits in here just fine. This will be fine for germination.. She’s sprouted only after about 40 hours so she’s really strong. 1/21, 2:54 PM. I made a my own Star Wars movie. Special effects are incredible. It’s very removing made my own Obi-Wan.A CalGonJim Production 🎥🍿 1/21 11:56PM Stoned Genie bong arrived today. my 2nd from them. Nice, this one has an ice catcher. got here in 2 days. 👍

Welcome to Veg Week 5 of Sweet Seeds Sweet Mandarine Skittlez F1 I'm excited to share my grow journey with you from my Sweet Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo strain Sweet Mandarine Skittlez F1 : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Sweet Seeds • 💧 Humidity Range: 60 • ⏳ Flowering Time: 7weeks • Strain Info: 19-24%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 600W x 2 A huge thank you to Sweet Seeds for allowing me to try my Best with this amazing collection from Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

We're almost there, those buds look delicious and above all they have a very strong smell, a sweet and fruity smell!

it grows so fast. The lower leaves are shaded and away from the light. So I cut them as the plant gets taller I really don't have a good setup to be able to clean my roots. I tried this week anyway. I watered each pot with 2L (not enough I think :/) of water at 450PPM PH: 7 then after I gave 1L of water at 900PM PH: 5.5. There was a big puddle in the room afterwards. But it wasn't that hard to clean up after all. In 5 minutes with a rag and a bucket ------------------------------------------------ -Daytime temperature: 24-29°C -Night temperature: 22-27°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==

She is lilly so far I didn't have any problems with her and I'm so exited to know what strain she turns out will find out in 3 or 4 weeks

she likes the heat a lot, i added the co2 on the 21st day, i saw all the difference in the next hour, it's amazing how they can store so much light/she likes the heat a lot, i added co2 to the 21st day, i saw all the difference in the next hour, it's amazing how they can store so much light * I still have not turned on the HLG 300

🌫️🌫️🌫️ 🌬️🌫️The end🌫️ 🌫️🌫️🌫️

D78/F34 - 17/06/23 - I changed light schedule hoping she's going better. (6 only red ligh and 7 red-white) D79/F35 - 18/06/23 - New lights schedule is running D80/F36 - 19/06/23 - Added water and integrators EC 1.0 and pH 6.4 D81/F37 - 20/06/23 - Nothing to report D82/F38 - 21/06/23 - Added water and nutes EC 1.0 and pH 5.7 D83/F39 - 22/06/23 - Temp is too high for both water and environment. I see signals of suffering on the flowers (foxtailing) D84/F40 - 23/06/23 - I'm trying to keep the Tremp under control but isn't easy. To lowering water temp (that now is about 26 °C) I'm adding some ice to the water