Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
5ª Settimana di Fioritura 💐💐💐💐💐 Cari amici della CampaCavallo 💚, guardate come diventa sempre più bella la MIMOSA SHOT 🌼🎇 di HERBIES SEEDS ✅ Colori bellissimi e cime allungate e pelose che iniziano a ricoprirsi seriamente di neve🤩🏔️👍🏻 Abbiamo un generale aumento delle temperature dovuto al cambio di stagione.... Speriamo nn salgano troppo nelle prossime settimane 🙏🏼
Likes
283
Share
FD43 - We're off into the seventh week of flower and we're in the homestretch. There's amber in the trichomes but I'm still seeing quite a bit clear so it will take a little while before the girls are done. FD45 - Pics FD47 - Pics FD49 - The end of another week and we're getting closer to chop.
Likes
9
Share
Week 11of flower...I got a new 70 pint dehumidifier and that fixed all my humidity issues instantly! I dont see any mold or mildew, so I think I dodged a bullet. I let the girls stay in the dwindling nutrient solution for an extra two days, until Tuesday night. I swapped out with flawless finish and uc roots for the flush. They probably could have had another 5 days or so and got a few more amber heads. I'm Chopping Saturday morning. They smell amazing, a lemony strawberry diesel.
Likes
48
Share
SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.
Likes
27
Share
@WestOzzie
Follow
Smells strongly like pepper and mandarin,start to thicken up now,3 maybe 4 weeks left,have about 1 week of perfect weather coming, have trimmed off the really tiny buds to focus the growth on the big ol nugs
Likes
36
Share
Hey everyone ☺️. This week it has developed really well and has finally taken on color again :-) 👍. The additional nutrients as described last week have taken off. 1 liter per pot is poured twice this week 🤗. In about 2 weeks it goes over to the flowering tent 👍. Otherwise there is not much to report this week. I wish you lots of fun with the update, stay healthy and let it grow 🍀😊 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
12
Share
@ktkoi
Follow
Day 48: Just finished my video from seed ordering to flowering. Mexican & CBD are in size 0.8L pot, while Green is in a 2L pot. Green was the first to shoot up so I put her in a larger pot but bent her stem under the soil which stunted her growth for a few days until her stem toughened up. CBD is now the tallest. Mexican was a runt to start with.
Likes
105
Share
@Hipichic
Follow
June 7th: We had a Thunderstorm roll through our neighborhood yesterday afternoon, with forty mph gusts and it almost knocked over a few plants, managed to grab what we had and prop up the stems for support. Hoping they weren't too stressed after it all!
Processing
Likes
22
Share
Big durb is big bud good! Damn this girl is stacked!!! Immense buddage. Still short, but why am I complaining? Have you seen those buds??? Intense aroma of spicy clove, liquorice and a touch of haze. The colours are forever changing, the pistils darkening and twisting. Started the flush, she should be ready in 2 weeks! Love, the doctor
Likes
17
Share
We’re in the home stretch. I’ll start flushing #3 at the end of this week. #1 will get one or two more weeks of feeding before I start it’s flush #2 is about two weeks behind #1.
Likes
16
Share
@DniceWJ
Follow
I was out of town this but everything looks great I did some stress training added More nutrients.
Likes
48
Share
@PapaNugs
Follow
Another good week come and gone. A couple of the girls needed nutrients so I add some general hydroponics blend into those that needed them. Didn't seem to make much difference yet. But they are getting into late flower. She's still holding on. Losing all her fan leaves, starting to lose sugar leaves. Not looking good. She needed more nutrients and gave them but didn't seem to help much. We'll see otherwise she's getting chopped first Dimmed to 80% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
10
Share
@RFarm21
Follow
Semana 18 agosto - 24 agosto Feed day: 20 e 23 agosto
Likes
37
Share
@Aedaone
Follow
The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had high temperatures of 79° and skies were mostly cloudy. The lows at night have begun to drop below 60°F. It has been extremely humid with tons of dew in the morning. I'll continue to defoliate and spray with biofungicide to get this powdery mildew under control. Day 2 we had early morning rain followed by mostly cloudy skies. High temperature was 77. The rain took care of the watering today. I'm treating with arber again and more defoliation. Day 3 we had a high temperature of 81°F, skies were partly cloudy, and I watered 3-4 gallons from the hose. Day 4 we had a high temperature of 83° with sunny skies. I watered 4-5 gallons from the well. I treated with Arber. Day 5 we had a high temperature of 88°F. Skies were clear and sunny. The humidity was around 90% today. I watered 4-5 gallons from the well. I finally got most of the infected leaves off and have one more plant to do tomorrow. I treated with Arber again today. Day 6 we had high temperature of 89°F. Skies were sunny. I watered about 4-5 gallons with well water. I've been treating these with Arber biofungicide but it's hasn't had much affect. I stripped all the infected leaves and lollipoped two today. I'll get the third tomorrow. I'll treat these tomorrow with growers ally fungicide and see if they can be saved. Day 7 we had a high temperature of 86°F with partly cloudy skies. We're expecting rain tonight and it's super humid today. The weather is not cooperating while I'm treating for powdery mildew. This week was a success. The plants gained on average 6 inches in height. They've slowed down their upward growth and are transitioning into flower. The weather has been atrocious for cannabis. These girls are super healthy but the humidity and cool nights have caused perfect conditions for powdery mildew. I began treatment with Arber biofungicide, but it wasn't doing much. I lollipoped and defolated heavy on two of the plant and finished the third after photos on day 7. The non infected leaves are responding ok to the Arber. I'm switching now and will treat late day 7 with Growers Ally fungicide. I defolated pretty heavy, but I expect a full recovery and increased production as there will be more light penetration.
Likes
4
Share
Es una planta pequeña relativamente debido al espacio que puedo manejar siempre vota. Tener plantas de tamaño más pequeño o mediano pero con muy buena producción espero pueda secarla y pasarla a tarros pronto
Likes
10
Share
@barlobruz
Follow
7/6/2021 - Trimmed lower fan leaves as they were being blocked completely, and a few tips were yellowing. - Continuing to lightly bend the upper branches so the lowers can catch up. - Bought some Gaia Green veg + bloom dry fertilizers as I expect I'll be flipping to flower soon. 7/7/2021 - Watered in a little bit of Gaia Green's veg fertilizer. - Foliar fed w/ DIY kelp extract. - Yellowing/browing on a new leaf, can't identify what it is. - Staked down the branches on the upper mains this evening to open her up for more light penetration, she was gettin' real bushy. 7/9/2021 - Trimmed out middle to expose canopy
Likes
15
Share
@Roope
Follow
This is amazing how that led efect all over tent and Wilma ooh its like magik liguid tranfer system and im like a lot, No going back old methods! PH is keepeng good 6.1 - 6.3 and tent heat is when open 28 celsius and 30 or 31 when hortimol is on, And still 20% not use i klic it full on when start blooming, I havent had to use extra fan upside of led once and still have to get EC meter heard that is like must have eguipment. So thats my next week projekt. But overall looking so fresh Green and healty plants that im happy. Till next week. ReggeaOkkey!