Likes
Comments
Share
@Hashy
Follow
******************************************** Week 7 flowering (week 3 flower) ******************************************** Light cycle=12/12 Light Power=100w 42% Extractor controller settings (during lights on). High temp= 26c Temp step=0c High Rh= 56% Rh step=0% Speed max=10 Speed min=1 Extractor controller settings (during lights off). High temp= 20c Temp step=0c High Rh= 58% Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=9.00am Radiator on= -19.0c Radiator off=+19.5c Smart controller settings (during lights off). Lights off=9.00pm Radiator on=-18.0c Radiator off=+18.5c VPD aim=0.9-1.3 DLI aim=30-35 EC aim=0.8-1.5 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 10-10-20 Method= Automatic Feed=Flower nutes Neutralise=0.1ml/L Katana Roots=0.2ml/L Plagron bloom=5ml/L Plagron Power buds=1ml/L Easy Ph down=0ml/L (1ml=24 drops, 1 drop=0.04ml) Easy Ph Up=0.083ml/L (1ml=24 drops, each drop is 0.04ml) Ec=1.35 PH=6.3/6.4 Runs=10 Run times=3mins (0.7L/0.35L each) Gap times= 17mins Total runtime=30mins(7L/3.5L each) Total flowrate= 0.233L/min(0.116L/min each) Auto start time=10.00am Auto stop time=1.03pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅22/3/25 Saturday(Day 43) 📋 💧 Automatic Flower nutes Ec=1.35 PH=6.4/6.3 Volume=9L Volume left=2.5L Volume used=6.5L(ml/min) Volume each=3.25L(ml/min) Runoff. Total runoff=0.8L Ec= PH=/ 💧 📅23/3/25 Sunday(Day 44) 📋 📅24/3/25 Monday(Day 45) 📋 📅25/3/25 Tuesday(Day 46) 📋 Removed some fan leaves. H=64cm D=10cm Dli=52 PPFD=1200 Raised light. H=64cm D=22cm Dli=30.4 PPFD=703 💧 Automatic Water Ec=0.2 PH=6.8/6.4 Volume=10L Volume left=3.0L Volume used=7.0L(ml/min) Volume each=3.5L(ml/min) Runoff. Total runoff=1.0L Ec=1.8 PH=6.1/5.7 💧 📅26/3/25 Wednesday(Day 47) 📋 📅27/3/25 Thursday(Day 48) 📋Small defoliation on lowers, LST 📅28/3/25 Friday(Day 49) 📋H=74cm D=12cm Dli=46.4 PPFD=1070 Raised light and increased power to 154w H=74cm D=24cm Dli=39.1 PPFD=905 💧 Automatic Flower nutes Ec=1.35 PH=6.4/6.2 Volume=10L Volume left=2.5L Volume used=7.5L(0.25L/min) Volume each=3.75L(0.125L/min) Runoff. Total runoff=1.6L Ec=2.0 PH=6.0/5.7 💧 ******************************************** Weekly roundup. 📋 She's in flower and has stretched a decent amount, she's gone from 21cm in height to 74cm during the transition into flower. This plant has been so rapid in growth. Back soon Take it easy. ********************************************
Likes
1
Share
Week 6 of flowering 10/23/24 Changed nutrients to fit week 6 Buds are getting even bigger and thicker. Defoliated a little. Noticed a PH of 4.8 in runoff, same as the late stage of flower in my previous grow. After lowering feed EC, CalMag on max strength, flushing with 0.8ec nutes for 3 days in a row, nothing changed and PH stayed the same. Read in a forum thread about constant low PH in the rootzone when growing in coco. Got great info about CEC, water, nutrients and little chemistry from a detailed explanation. (https://www.icmag.com/threads/recurring-problem-with-low-ph-in-coco.338385/page-2#post-10843765) Flushed plants with tap water + calmag, PH 6.5. Used 120L total for 4 plants in 2 days. 1st day: flushed after lights on, did not water until 2 hours before lights off and flushed again. Runoff PH went up a little, but not to the correct range. 2nd day: flushed after lights on and checked runoff EC + PH, of each plant. Fortunately, PH got corrected to 5.8, and I returned to automatic watering 4 times a day (with 10%-20% runoff). Thoughts: In the last grow, I thought I had a problem because of salts buildup in the media with constantly low PH in late flower. I didn't fully correct the problem till chop day. Same problem here in the same stage of flower without the salt buildup. After reading every forum I could find about the problem, I understood that my bloom nutes were the main problem because of their chemical composition. The coco ability to exchange ions lead to the low PH in the rootzone. It got worse quickly because I did not use any tap water with the feedings, so the PH could swing easily and drastically without resistance. After I looked online for the T.A. feeding chart, I saw they used TriPart Grow till week 7 of flower, the Nitrogen type they are using will up the PH. CocoForCannabis chart that I'm using, has not enough nitrogen to combat the bloom nutes PH down effect in flower. It gets even worse with RO water because there are no minerals that can resist PH down. Now I'm using 30% tap water with rest RO water, T.A. TriPart feeding chart with calmag and silica. Hopefully I have corrected the problem for the rest of the grow. It wasn't easy, because there were lots of variables that worsened the problem quickly. Now I'm checking runoff PH and EC daily. Update on next week :)
Likes
2
Share
@TTerpz
Follow
Fed with nutrients on 4/16/25 Watered with 6.8 ph plain water on 4/18/25 Day 5: fade began 4/20/25: fed with nutri
Likes
62
Share
@nonick123
Follow
Día 64 (23/12) Christmas holidays. Only watering Día 65 (24/12) Christmas holidays. Only watering Día 66 (25/12) Christmas holidays. Only watering Día 67 (26/12) Christmas holidays. Only watering Día 68 (27/12) CBD Auto 20:1 #1 - Riego con 0,5 litros de PK Booster Compost Tea OG Kush Auto - Riego con 0,5 litros de PK Booster Compost Tea Preparación del Té de Compost Ingredientes Agua Osmosis o Agua declorada durante 24 horas: 1 Litro (o la cantidad que necesites) PK Booster Compost Tea: 15 g/L ORGATREX: 5 ml/L BACTREX: 1 g/L Instrucciones: Airear con una bomba de aire de pecera durante 24 - 36 horas a 20-25 ºC Añadir BACTREX (1 g/L) 30 minutos ANTES de parar la aireación Usar el Té inmediatamente al apagar la bomba de aire Usar 0,5 Litros de Té por Planta Día 69 (28/12) Christmas holidays. Only watering Día 70 (29/12) Christmas holidays. Only watering 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/ With 2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp
Likes
1
Share
@Zero0
Follow
Germinated went well both seeds germinated in abt 3 days in Water ac infinity tent coming in soon so I’ll be transferring it to the tent around Wednesday.
Likes
55
Share
@Max1973
Follow
Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm
Likes
9
Share
Grow going very well no sights of stress my girls are doing perfect 400 ml water each day 0.25 nutrients per plant per watering 600 hps was running for 16 hours but i had to lower the working hours to 15
Processing
Likes
7
Share
@x_grower
Follow
Last week plants were looking super healthy and responded very well to the second topping so I decided to flip the light schedule few days later. They already started stretching and the smell is noticeably enhanced.
Likes
5
Share
@Nvchods3
Follow
creciendo de poco a poco , eh tenido unos problemas por la altura de una de las plantitas. @flp_igm92
Likes
Comments
Share
@UrbanBoer
Follow
In case you wondering why do I have three different temperature readings, well, before getting a thermometer I used the general atmosphere weather reading from humidity to temperature, however from day one of getting a thermometer I noticed my greenhouse different temperature readings depending where you place it, from moderate to cold in the shaded areas and hot, warm, moderate in areas where sunny, I had to erect my greenhouse in a secluded(out of sight corner of the yard) spot. This being a reason I need some solar lights, and fans for internal air flow, as self cooling as this house is, I need a stronger flow of air to stress my ladies to strengthen vertical growth.I still document the outdoor temperature and I take pictures of the indoor(greenhouse’ internal temperature) temperatures, to show the how the greenhouse is amplifying the heat and depending on which part of the greenhouse(shaded or direct sunlight), believe it or not the thermometers differ in reading even at night. The red mercury thermometer reading indicate temperatures in which my ladies are tanning in. Super Skunk I have a feeling she will be my biggest plant amongst the sextet I was wrong when I said Monday’s Blue would be the biggest… however I might be wrong again, all I need to do is remain consistent with watering, and I need to bite the bullet and buy a fan by the end of this month, the sunlight iSight not be direct on the plants however conditions keep these ladies healthy, nothing a solar flood would not fix, I will just need to get an yellow, orange, and red gels to cloak the light during flowering, yet my other problem is they will not flower at the same time, which I will fix in my next cycle, I’ll just get those gels for future grows, and I should not forget a blue gel for veg stag.
Likes
38
Share
@Roberts
Follow
Fruity Pebbles autoflower is finishing up. I just switched her to ph water today. She will be harvested in about a week. She has already started consuming her extra stored energy days ago. It looks like some good flower. Thank you ILGM, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
54
Share
I decided not to flush her, since I mixed her last food too strong and ended up with lots of leftover. She's also my only plant blooming at the moment, so I'll just keep using the leftover prepared water to top her buckets until she's done. ;) ----- The leaves turning yellow tell me I need to get ready to harvest her, probably this weekend. I'm sure I could do it already, but I'm really pushing for a couchlock...
Likes
3
Share
@Oldwied
Follow
Everything is fine. Nothing to do. Light Power: 90% Day 66 Flower day 19 Photoshooting
Likes
10
Share
@Lazuli
Follow
She bushed out a bit more then i expected, she did very well
Likes
56
Share
Another smooth week for everyone but the twisted helix. This plant gets the award for the most unhappy plant I have ever grown. The leaves are dying off fast and she isn't looking good. Just trying to keep her alive long enough to make hash out of her. Sugar Cane buds are pretty small compared to the others but she's full of trichomes and still has some time to put on weight. Jack Herer has a super strong lemony aroma. Everyone is still stacking up. Not seeing any swelling yet so we still have some time before they think about finishing up. I put the dehumidifier in the room this week. Hoping to start getting these girls chopped and trimmed in the next few weeks, but have to let them do what they do.
Likes
4
Share
@Bossman
Follow
I ran into some issues with the pan dragon f1. I fried her with nutes as you can see by the leaves, but the rest are fine. I’ll be taking them down day 70
Likes
18
Share
Watered 50 Gal fresh plain PHed water, ppm was around 2100 so if the 50 gal doesn’t dilute it enough then I will vac out the remaining water and rinse out the totes to get the salt/sandy particles off the bottom. I noticed the 2 mars 1600 leds are not getting light evenly to all the canopy so for my next crop I will be getting 2-6’ light rails and stagger the lights as they move, at 5-15 watts each they should be more efficient than getting 2 more 630watt leds. Also next crop I will be downsizing my scrog to a 7’ x 7’ giving me a 1’ perimeter for working & admiring 🙏🤤
Likes
27
Share
@HAPPY91
Follow
Mars Hydro TS 3000 Dimensions: 25.3" x 22.8" x 2.7" Weight: 11.3lb Coverage: 4x4 feet Watts Consumed: ~450w Light Intensity: Up to 1150 uMol @ 18" height Spectrum: Full White + Infrared LED Brand: Unbranded LEDs Voltage: 120; 240; 277 Warranty: 3 Years Week 2 3/31/2021-4/6/2021: Day 8 3/31: Played Lizzo Radio. 64.8-80.1 44%-77% Day 9 4/1: Played Hozier Radio. Drank 0.25 gallons plain water=27 ppm 6.6 ph 71 f.