Likes
Comments
Share
@Sadhus
Follow
C'est reparti pour un tour de lemon blanco V3 khalifa genetics, 20 clones en ebb and flow ,bille d'argile expansé, dry part organic terra aquatica, 7 clones en pot terre plagron engrais organiques Madame grow
Likes
8
Share
Hello Diary, Milky Way F1 is ready for harvest after exactly 10 weeks. 79 days since I put the seed in the ground. 75 days since Apollo F1 rose from the ground. All 10 weeks passed without any problems, Milky Way F1 as well as her roommates proved how resilient, fast and hopefully generous they are. I'm very happy with how things look so far. Finally, as seen in the photos, Milky Way F1 looks impressive, the flowers are hard packed, full of trichomes. For the last week, watering was usual, every three days. After cutting off the stem at the bottom, I put the plant upside down in the grow box to dry. Here's what the last week looked like. 02/07/2023 - Day 64. Watering. I watered the plant with about 2 liters of water. 05/07/2023 - Day 67. Watering. I repeated the procedure as I did three days earlier. 08/07/2023 - Day 70. Photography and harvesting. I put it to dry upside down and will leave it to dry for at least 2 weeks. That's it from me. I wrote everything I thought was important. If you have any questions related to this strain, feel free to write.
Likes
12
Share
Aug 30: still hot. Sep 2: heat wave is now past and we’re now into a couple days of smoke. Cut back water volume from 9 L/day when it was hot to 5-6 L lately. Sep 5: don’t take flash pics of photoperiod plants unless you follow it up with a red light.
Likes
32
Share
Likes
10
Share
@Yolka
Follow
On day 36, the lighting regime was changed to 12 hours of light. Everything goes on schedule, the plant looks very healthy. I'm satisfied:) This is my first plant that grows so well. The leaves are just perfect. Based on the result, I will be adjusting the substrate with nutrient additives.
Likes
5
Share
@Prepp
Follow
This clone was randomly given to me and I had no setup! I immediately got her out of the growers pit into a 3L. This is going to be a simple Living Soil and Water only grow! Her roots outgrew the 3L and she began to crash as you’ll see from the pictures. This was easily remedied by increasing to a 5L.
Likes
15
Share
Hifi 4G seems to be a bit sensitive to the current and previous feeding levels. Had multiple leaves exhibit nutrient burn. Otherwise all seem to be happy. Hifi 4G, NL/Skunk and Blueberry continue to lead the pack on Bud development. God I hope I don't screw this up!
Likes
Comments
Share
@gonzzzac
Follow
tuve la semana pasada araña roja pero ya lo pude solucionar con un insecticida foliar, también tuve una larva pero la pude eliminar rápidamente antes que se reproduzcan, esta semana que vienen parece que se viene un crecimiento más explosivo ya con efectos de el fertilizante y días más cálidos
Likes
12
Share
Coming to the end here for both plants. I've been only watering ph water. Watered until runoff for the last time and just watching the trichomes turn now. 10.5 weeks and they seem to be pretty much done.
Likes
5
Share
@Ninjabuds
Follow
Obama runtz x gas tax sad to say both seedlings are super crappy so far. If it was not for the gas tax parent being the best flower ever then I wld just toss these but sometimes the crappy slow growing plants end up being super dank It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.
Likes
5
Share
@rkomaaa
Follow
It's been an exciting journey training my plants, and I'm happy with the progress they've made. I've been implementing various training techniques to encourage healthy growth and maximize yields. The plants have responded positively to the training, and I'm hopeful that they will continue to thrive and develop as planned. Fingers crossed for a successful outcome!
Likes
11
Share
@Nxs235
Follow
And here is a photo of the second plant at the beginning of the 18th final week, the temperature in the box is 23 degrees Celsius, from which the buds turned purple
Likes
18
Share
Hey growmies! 👊 Welcome to week nine for Olga the Orange Apricot Glue XL Auto by Sweet Seeds. Please check out the sister diaries: Sweet Zensation XL Auto & Tropicanna Poison XL Auto Massive thanks to Sweet Seeds for sponsoring this grow! Daily Updates: ### Week 9 Day 1 11:00 27/8 I have been fertigating but not updating... not much change during this phase, will take more thorough photos later in the week. ### Week 9 Day 3 17:00 29/8 Photographed ### Week 9 Day 4 06:00 30/8 Fertigated 3l --- ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pot 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Sweet Seeds https://sweetseeds.es Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com ==========
Likes
59
Share
@Ferenc
Follow
Day 80, 2nd of December 2020: I feel lucky that I have the red pheno because.many diaries i saw here just green pheno. Buds are on the way with lovely colour and nice smell I am so so excited she is really nice :) All good the lamp is now on 11 hours and off 13 hours. Every week 15 minutes was taken off and after 4 weeks here we go. Strated 12/12 and now 13/11 wanted try to imitate the nature as the light days are getting shorter. Fertilization has changed no more epsom salt from this week and I will stop giving nitrogen as well from next week. Great job Sweet Seeds. Nice genetics :)
Likes
10
Share
@JreyBudz
Follow
She is growing amazing and very fast. I did some training on the lower branches to get them some light and did some defoliation on unneeded leaves. I’m watering every other day now still only adding nutrients every third watering. I’m ready to see some of these buds start stacking!!!
Likes
5
Share
—————650umol/s————— G.E. Lighting LUCALOX 400W
Likes
17
Share
@Naujas
Follow
it's amazing, this growth looks much better than my first attempt, my decision was to put a smaller pot and change the light - the girl really liked it, FastBuds goriilla cookies with a small space manage perfectly:).
Likes
2
Share
@Rustynugz
Follow
So this week all the gelato 33 plants got 2ml/l fish mix and 1 ml/l of bloom added to 3 litres for water. And each one given a litre each. Gap between was 6 days and no water in-between as soil did not dry out through week
Likes
16
Share
@DrLaggis
Follow
Day 72: The Finale 🌿🌟 It’s finally time. My very first grow is coming to an end—at least the cultivation phase. The plant is now ready for harvest, and I can’t believe how incredible this journey has been. I never expected to enjoy the whole process so much—from nurturing the plants to watching them grow and evolve. I’m absolutely hooked and can’t wait to dive into the next steps: harvesting, drying, curing, and of course, starting a new grow soon with fresh ideas and experiments! While it may not be the largest yield, the quality of the buds speaks for itself. The time, love, and care I’ve put into this grow is visible, and I’m pretty proud of the results. I’ll admit, I was a bit impatient at times (which I think every first-timer can relate to 😅), but the experience was priceless. Here are a few interesting highlights from my trimming and harvest process: 1️⃣ Dark Phase Before Harvest Two days before harvest, I put the plant in complete darkness to encourage resin production. I'm not sure if it really made a difference, but it was worth trying! 2️⃣ Wet Trim vs. Dry Trim I decided to go for a wet trim because the buds were really dense, and I wanted to avoid any risk of mold. I’ve read that wet trimming can speed up drying and may slightly impact the quality, but this is part of the learning experience. Next time, I’ll try a dry trim for comparison! 3️⃣ Yield Update Wet, the total came in at 179 grams from my plant. Trimming took around three hours, and it was actually a lot of fun, despite the time commitment. 4️⃣ Curing Plan The buds are now hanging in the tent for about 8 days. Once dried, they’ll go into jars with Boveda Packs (62% humidity) for another 3 weeks of curing. I'll update the smoke report once they’re fully cured, but I’ve already had a sample of the same strain from a friend, and I can say it’s pretty amazing. Final Thoughts on My Grow 🌱✨ As mentioned earlier, this grow has been an absolutely incredible experience, and it has definitely set me on a path to jump right into my next grow. There were ups and downs along the way, such as over-pruning, which I believe stressed the plants a bit. Additionally, I think they could have benefited from an extra week to mature. We also faced many temperature fluctuations this summer, which impacted the plants due to external weather conditions. I'm really pleased with the quality of the buds. The quantity is okay—I can’t fully gauge it yet—but I’m sure there’s more potential to unlock. I've gained valuable experience in what worked well and what didn’t. Overall, the countless lessons learned during this grow far outweigh the few mistakes made. I'm incredibly proud of my first results! As this long journey comes to an end, I want to thank everyone who followed along. I hope you enjoyed all the content. In that spirit, happy growing, and see you next time! 🌟