-I made them a slight defoliation; Just a couple of sheets. I'll make another one shortly.👌🏻🦈 -I also applied via irrigation, 1gr x 1L, of Bio Henhancer Bio Feeding.💪🏻

So here it is, the final week before harvest. I've been tested by my equipment but managed to handle everything thrown at me. The dehumidifier breaking 2 weeks ago was definitely the scariest moment! The size and smell of these is ludicrous, I reckon it'll be a bumper harvest!

Home stretch baby!!! Start of week 10 of flower, and things are looking chop ready:) The ill effects of last weeks PK burn have subsided and the plants are back to healthy. Have been checking trichomes and flower form, and based on my experience, these ladies are coming down in 6 days, October 6th. One of the plants has the hardest, densest, stickiest nug i have ever seen. So looking forward to tasting. I have been off the nutes for a few days and will be water only from here on out. I have dusted off my old bowl trimmer and drying rack. I have always wet-trimmed and dried in a rack. I dry for about 5 days and then start jarring and burping. The bowl trimmer is soooo fast. It cuts my trim time by literally 90%, will post a video on chop day. Updates later in week F66 - Chopped the one girl who had a tonne of amber in her. Looks to be a good 2.5 zips when dry, time will tell if my estimate is correct, but it comes from experience. Other 7 plants coming down on F71. Check my bowl trimmer video!

Well thats my grow diary. I hope it ends up being informative of helpful to someone somewhere along the line. I have more grows going, but I am going to skip on diaries for now. See you next time.

Did a full leaf strip on everything this week, the pics and videos were taken 2 days ago I just havnt got around to uploading them. Everything bounced right back after the strip but the pots arent drying out as fast and humidity went down a little bit. Use the code bangdang for 10% the following sponsors.. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led

Flowerweeks

Okay vor 5 Tagen Blüte eingeleitet,ist ja 137 cm hoch und 140 cm breit.. Wird ne ordentliche Hydroponic Pflanze die Purple Lemonade von Fast Buds!!

The cold is taking a toll, that’s for sure. Still looking decent but I’m sure I’ll get my fight with this one ________________________________________________________________________ Light from @MarsHydroLED 😎 FC-E6500🔥 730 Watt⚡️💥 2.85 μmol/J🔥 Full Spectrum 🌈 WiFi smart connection 😱

Welcome to week 10 day 58 transition has officially ended and Bloom is now starting we are on day one of flower my friends. Day 59 as it turns out upon closer inspection after my update I had to cut down the two back plants as they were both clearly male you can't mistake pollen sacs luckily I caught it very early on the risk of pollination is hopefully 0. This is extremely upsetting considering I purchased feminized seeds from 7 East genetics.

Día 41 de floración. Ya he hecho el lavado de raíces y ahora toca esperar. Todas tienen una pinta suculenta. La Critical Poison de 00 seeds tiene demasiada distancia internodal, pero los cogollos son como misiles, tenía curiosidad por probarla en interior, porque en exterior me gustó bastante. Las early de Delicious, muy bien como siempre ( exceptuando la Bay Burger que sacó bananas, 1, de 9 plantas), las Eleven Roses están frosty frosty, la Unknown tiene una estructura y una pinta muy seria, y las Delicious Candy, tienen cogollos grandes y duros, espero que saquen algo más de aroma. Y por último, las Appalachian Kush early de World of Seeds las puse de casualidad, y están siendo de lo mejorcito. Os cuento como termina la cosa. Feliz semana y buenos humos!

Всем привет. Вот и вылезли мои маленькие малыши! Выглядит растение счастливым и здоровым! Сегодня 4 день от каски. Увидимся на следующей недели друзья!

Woche 6 – Stretch des Todes & Kontrolle behalten Diese Woche hatte es richtig in sich. Der Stretch ist komplett eskaliert – vor allem bei der Blueberry und der GMO. Beide haben in nur einer Woche rund +40 cm hingelegt. Direkt dahinter kommt die Hyperion, die ebenfalls ordentlich Gas gibt. Runtz und Purple Punch bleiben dagegen ihrem Stil treu: kompakt, buschig und kontrollierbar – perfekter Kontrast im Raum. Trotz des starken Wachstums konnte ich das Canopy sauber ausgleichen. Alle Pflanzen stehen jetzt auf einer Höhe und laufen stabil bei etwa 40 cm Abstand zur Lampe, was aktuell perfekt funktioniert. Beim Gießen zeigen sich klare Unterschiede: Die Blueberry ist weiterhin extrem durstig und zieht den Topf schnell leer, während Purple Punch deutlich weniger braucht. Das Handling der 15L Töpfe läuft inzwischen richtig präzise. Untenrum habe ich weiter aufgeräumt, damit die Energie gezielt in die Tops geht. Die Struktur ist jetzt schön luftig und fokussiert auf die Hauptbuds. 👉 Fazit: Massiver Stretch, saubere Kontrolle und eine sehr homogene Fläche – genau so soll’s in der Blüte aussehen

Día 44 (15/07) Wow! No hay shock de trasplante! 😍💥😁 Todas las ramas se han estirado hacia arriba tras el ajuste de LST y se están formando nuevos nodos rápidamente Esta combinación de nutrientes de Lurpe + substrato de PRO-MIX HP es una maravilla 😍 Día 45 (16/07) Ayer tuvimos ola de calor (37 ºC) y han aguantado muy bien! A última hora de la tarde (cuando ya no había sol directo) les apliqué H2O en spray foliarmente para refrescar los estomas Hoy parece que vuelven las temperaturas estándar para esta época del año: 29 - 30 ºC en las horas centrales del día Riego con 1 litro de H20 pH 6,5 Día 46 (17/07) Pequeños ajustes de LST Hay algunas ramas inferiores que no se han formado / estirado mucho Lo más probable es que haga una buena limpieza este domingo, 7 días después del trasplante, para dejar solo los brotes por encima del 4º nudo Día 47 (18/07) Riego con 0,5 litro de H20 pH 6,5 Este domingo (día 50) haré limpieza de partes bajas y tal vez también de nuevo topping en las 4-6 ramas principales 😁 Día 48 (19/07) Día de muchísimo calor con 37 ºC. A ver como lo llevan! Riego con 0,5 litro de H20 pH 6,5 Día 49 (20/07) Para ayudarles a llevar mejor el calor de las horas centrales del día, coloca una malla de sombreo (70%) sobre el invernadero Lo cierto es que se nota que baja mucho la temperatura debajo de la malla! Van a estar más fresquitas! 😍 Riego con 0,5 litro de H20 pH 6,5 Día 50 (21/07) Training session! Hago limpieza del tercio inferior de la planta, de todas las ramas y nudos que no superan la línea del dosel marcada por el 4º nudo (1er topping) También hago topping (2º) a todas las ramas principales La idea es tener 12 ó 14 colas principales para que no se hagan muy altas De paso saco unos cuantos clones de las ramas inferiores eliminadas 😁💥 Para superar el estrés, hago las siguientes aplicaciones y riego: - Riego con 1 Litro de Té Vegetativo de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Green Sunrise 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L - Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

This iteration had its fair share of issues, and has lived through its veg phase without proper lights. It had its tip accidentally ripped off which seemed to boost growth in all secondary branches, which aligned well with the LST. The harvest was sizable for a noob, and the taste is pretty amazing

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

Another week gone by and the plants are growing nicely. I had some yellow coloring of the lower leaves at the beginning of the week and so i increased the fertilizer a little bit and the plants are responding well so far. Since they are in the bigger pots i also dont need to water them every day anymore, this week i only watered them twice. I also picked some of the lower leaves which dont receive so much light anymore, topped the remaining strains and tried to bend down some of the branches with some garden wire but didnt work as good as i hoped it would. i still have a scrog-net which im going to use later, but i think the plants are still too small. in the future im going to try different techniques and materials, for now i'm not going to overthink it and just let them grow now,.