We are starting quite well, it is beginning to show its first signs of flowering, we expect a flowering of approximately 6 weeks that could extend to 8 weeks depending on the fattening let them have the buds

easy to grow and comes with n amazing nose 👃... i could not believe the candy type smell that this lady is putting out, i'm kind of in love.... smooth amazing high with a stress and pain relief you wouldn't believe! it takes anxiety away like nothing and tastes overall amazing, big and kind of dense buds! 2nd place in bud structure ✅

She’s almost ready!!

Week 6 (3-3 to 9-3) 3-3 Temps: 17.9 to 22 degrees Humidity: 58% to 74% I have a lot of faith in these girls, at the first sight they see a bit unhappy and it looks like it has some nutrient problem going on. But the leaves showing signs are the ones where the plant snapped in half, and they are recovering, im sure they will be allright in some time! 4-3 Temps: 17.8 to 21.9 degrees Humidity: 61% to 72% 5-3 Temps: 17.8 to 21.5 degrees Humidity: 55% to 79% Watering: Both 1000 ml. (Only calcium) 6-3 Temps: 17.8 to 21.7 degrees Humidity: 66% to 82% 7-3 Temps: 17.6 to 21.7 degrees Humidity: 68% to 82% 8-3 Temps: 17.7 to 21.7 degrees Humidity: 70% to 88% Watering #1: 1000 ml. The girls are doing very well! They grew quite a bit 😀 9-3 Temps: 17.3 to 21.5 degrees Humidity: 63% to 87% Installed the dehumidifier, as the humidity is getting high at lights off.

Giving these girls some good flushing out they only have 5-7day till harvest

- Semana tranquila - Se inició con Armor Si y Suggar Daddy - Se usa activador metabólico Everest - Lámparas Fluence de OSRAM

Week 9: Day 57-60: Seemed to have gotten the deficiencies(rather PH fluctuations causing them) under control. 4AM#3 took a while to recover but it has stopped progressing for the time being and the buds have continued to bulk up while the pistols start to orange out. 4#1 and #2 are doing good. They recovered faster and started to really bulk up. I'd say 4AM#1 has about 50-70% orange pistils while 4AM#2 and #3 are at about 10% by day 60. Damn like I said last week 4AM#2's buds are gona get huge! One of them tipped over on day 60, had to add support, but quite hard to find a spot when half the branch is the bud... Day 61-63: Continuing to bulk up, the 1.25x Calmg dose on day 60 seemed to do them well! 4AM#3 hasn't been showing any new signs of deficiencies, so that's good! Hoping she won't be too premature when I chop the plants(I am chopping days 73-74, only days I have time), but the pistils are starting to go crazy! Around 50% orange pistols now on 4AM#2 and #3! And 4AM#1 has about 90-95% orange pistils. When I used the handheld microscope, which is hard, the trichomes are almost all milky and some 5% amber on 4AM#1 and about 30-50% milky and a few amber on #2 and #3, seems like it will be just right! Can't wait! Gave em their last big feed of blume nutes on Dy 63, will be giving them plain PH'd water with Regulator till harvest. 10 Days left! almost there! 4AM#3 might look ugly but she still frosty and thicc as hell! Oh and they smell delicious!!! 😵 EDIT: Oh and just wanted to say thank you for all the help you all have given me so far! Oh and shout out to FastBuds, which sent me a message last week saying they were interested in me growing their genetics! They're sending me some free seeds for my next grow! How awesome is that!

We planted a second Jack Herer Auto from Quebec Cannabis Seeds in a 1 gallon pot as an experiment to see how it does compared to our jack herer auto in the 3 gallon pot. We wanted to see which plant would give us the best yield for the space available. This will help us decide how we want to do our next few rounds of grows and if we want a SOG or just have a few big plants in the tent.

it has stretched a bit under the sun because she had only about 4-5 hours of direct sunlight everyday on my window. Then I decide to move her indoors for flowering phase. 💪🙏

Week 5 Veg Report: SCROG Netting, Massive Leafs & Precise Data Mastery! 🌱 Girls Growing Stronger Than Ever! 🌱 This week has been truly epic in the grow room—so much so that it’s time to bring in the SCROG net! With the canopy expanding and the younger ones still working to catch up, the SCROG net will help me achieve that perfect, even canopy. A well-placed SCROG not only ensures better light penetration but also gives the smaller plants a chance to spread out and thrive alongside their bigger sisters. Now, let’s dive deep into the SCROG method. The Screen of Green (SCROG) technique is a grower’s secret weapon for maximizing space, light efficiency, and yields. The concept is simple but powerful—train the plants to grow horizontally along the net, forcing them to expose multiple budding sites instead of just a single cola. This way, the canopy spreads evenly, improving light distribution and air circulation throughout the tent. As the plants grow, I’ll gently weave their branches through the screen, ensuring they fill every square inch of space. The end goal? A sea of buds all basking in equal light! 💪 Huge Leafs Everywhere! 🌿 One thing that’s really catching my eye this week is the size of the leaves—they’re HUGE! Honestly, they’re so big I couldn’t resist a little fun, so I made myself some fashion accessories: leaf earrings and a cap from the Super Sativa Seed Club Green Papaya! 😂 And, of course, I captured the moment. But seriously, large leaves at this stage are a great sign of healthy, robust plants. These “solar panels” are hard at work soaking up all the light, driving photosynthesis, and fueling growth. So, what does it mean when your plants are showing off big, luscious leaves? It’s a clear indication that they’re happy, healthy, and thriving in their environment—big leaves mean lots of energy being produced and stored for future bud growth. Exactly what we want! 💧 Precision Feeding with Aptus Nutrients 💧 This week, I took a deep dive into my Aptus nutrient lineup and shared a video explaining how each product affects the water’s pH and TDS. Using the AMP-3 Precision Meter, I’m getting real-time water readings and keeping everything dialed in perfectly. Let’s break it down: • pH: 5.83 • TDS in solution: 445 ppm • Water temperature: 25.2°C The Aptus products are incredible for balancing nutrients without throwing off the pH or TDS too much. I’m fine-tuning my feedings based on these readings to make sure the girls are getting exactly what they need. The precision I’m able to achieve with the AMP-3 is mind-blowing—I get immediate feedback on pH, temperature, and EC, allowing me to make real-time adjustments and ensure the perfect environment for nutrient uptake. 📊 Environmental Mastery Thanks to TrolMaster 📊 Speaking of control—let’s talk about the TrolMaster system! Between the DSH-2U Humidity Station and all the other sensors, I’ve created the perfect environment for my plants. Here’s where we’re at this week: • Temperature: 26.2°C • RH: 70.6% • CO2 levels: 775 ppm • VPD: 1.0 kPa • PPFD: 423 Thanks to TrolMaster, I can monitor and adjust these metrics in real time, and the best part? I can do it all through the TM+ Pro app, even while I’m lounging in my green papaya leaf hat! 😆 Whether I’m checking the CO2 levels, adjusting the lights, or fine-tuning the humidity, it’s all in my hands with just a tap of my phone. Talk about convenience! 🌱 P.S. – Inline Sensors: Heavy-Duty Precision 🌱 Now, let’s talk about the heavy-duty players in this game—the (PCT-2) Heavy Duty Inline EC/Temp Sensor and the (PPH-2) Heavy Duty Inline pH Sensor. These bad boys are connected directly to the AMP-3 Precision Meter, and they’ve been absolutely crucial in giving me the most accurate readings on my water and nutrient solution. The PCT-2 keeps me informed about the electrical conductivity and temperature of my solution, which is key for monitoring how well my plants are absorbing nutrients. Too high or too low, and we’re asking for trouble, but this sensor ensures I’m always in that perfect range. The PPH-2, on the other hand, is all about maintaining the perfect pH balance. A fluctuating pH can mean nutrient lockout or deficiencies, but thanks to this sensor, I get a constant read on my pH levels, so the plants are always in their sweet spot for optimal nutrient absorption. Together, these inline sensors allow me to run a super-tight ship—every drop of water and nutrient is dialed in to perfection, keeping the plants happy and healthy! Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Growers Love to you all 💚💚💚

LST'd all of my plants this week. The growth is getting quite amazing! I also trimmed a lot of fan leaves to give the lower growth more light. I'm not really concerned about extending the timeline as I'm going more for quantity more than speed. In total the LST, Trimming and watering took about an hour each, I really enjoyed it though. The third plant that dried out last week seems to have bounced back quickly. I trimmed the leaves that were dried out since they were only going to be a drain.

Week 9 (12-8 to 18-8) 12-8 Temps: 22.2 to 29.1 degrees Humidity: 47% to 61% Watering: Both 1500 ml. Dry Weight #2: 2.5 kg. #2: 2.5 kg. 13-8 Temps: 23.8 to 28.6 degrees Humidity: 57% to 70% 14-8 Temps: 25.1 to 29.8 degrees Humidity: 56% to 65% I found out that i had the timer on 16/8 instead of 18/6 for the entire 9 weeks. Maybe this is the reason why the plants dont grow that fast. 15-8 Temps: 24.8 to 29 degrees Humidity: 46% to 66% Watering: Both 1500 ml. Dry Weight: Both 2.5 kg. Today is the first watering from the bottom. Also removed some leaves. 16-8 Temps: 24 to 28.4 degrees Humidity: 49% to 68% 17-8 Temps: 20.4 to 26.3 degrees Humidity: 45% to 79% 18-8 Temps: 21 to 28.3 degrees Humidity: 40% to 59% Watering: Both 1500 ml. Dry Weight: Both 2.7 kg. Did some mainlining/scrogging

Listen, when things are going great it feels weird! I'm following my feed chart and watching these beauties unfold! They are starting to smell rich and sparkles are starting to show!!!! I always fret over my babies but really they seem to be killing the game right now! Stay tuned....... On a side note i'm enjoying the hell outta learning to edit pics in adobe illustrator!!! __________________________________________________________________ Bit too much Nitrogen and they want MORE cal-mag! Check out my video! Things are going great! I even think I did a good job defoliating! __________________________________________________________________ Glory Glory to mother nature! A grow gone right is a site to behold!!!!! I look upon my ladies with giddy glee!!! only problem is i'm a bit outta space in the canopy, but thats the best problem to have!!!! Just waiting on the buds to get swoll!!

I'm so excited and i just can't hide it

My Gorilla Cookies seedling is looking healthy with its deep, dark green leaves. I've been gradually increasing the light intensity over the past few days, which is crucial for autoflowers at this stage. It's definitely time to ramp up the light now, and I'm excited to see how it responds It's been a challenging week with the constant rain and ridiculously high humidity. Keeping things dry indoors has been a real struggle. Despite the weather, I managed to flip all my feminized photoperiod plants to flower this week. I'm hoping the switch will go smoothly, but with this humidity, it's going to be tough.

Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.

01/11 - Comenzo su séptima semana en etapa de floracion. Se encuentra perfecta, nunca cultive una planta tan perfecta como esta, los cogollos son grandes, bañados en tricomas y tiene un olor muy fuerte. Sin dudas es una genetica que volvería a cultivar, no tuve ningun problema con ella. Entro en lavado de raiz, estoy utilizando de la marca de Advance Nutrients el fertilizante Flawless Finish para acelerar un poco las lo que es es lavado. En estos dias estare publicando mas imagenes de como viene. Podes seguirme en Instagram como @bruweed_arg

Всем привет друзья! Растние растёт не по дням а по часам. Набирает жирок на шишках полным ходом. Очень хорошо кушает Цветёт и пахнет Всем мира и добра и хороших урожаев!

Stretching like hell and finally throwing a few white pistols! Did well in several t storms this week, now to get thru ‘cane season